| Age | Commit message (Collapse) | Author |
|---|
|
Use it in `printVRegOrUnit()`, `getPressureSets()`/`PSetIterator`,
and in functions/classes dealing with register pressure.
Static type checking revealed several bugs, mainly in MachinePipeliner.
I'm not very familiar with this pass, so I left a bunch of FIXMEs.
There is one bug in `findUseBetween()` in RegisterPressure.cpp, also
annotated with a FIXME.
|
|
In both ScheduleDAGInstrs and MachineScheduler, we call `BufferSize = 0`
as _reserved_ and `BufferSize = 1` as _unbuffered_. This convention is
stem from the fact that we set `SUnit::hasReservedResource` to true when
any of the SUnit's consumed resources has BufferSize equal to zero; set
`SUnit::isUnbuffered` to true when any of its consumed resources has
BufferSize equal to one.
However, `SchedBoundary::isUnbufferedGroup` doesn't really follow this
convention: it returns true when the resource in question is a
`ProcResGroup` and its BufferSize equals to **zero** rather than one.
This could be really confusing for the reader. This patch renames this
function to `isReservedGroup` in aligned with the convention mentioned
above.
NFC.
|
|
Identified with modernize-use-equals-default.
|
|
|
|
NFC (#161997)"
This reverts commit a7414796c0854a9e6f649d922a58aa63147ae2e4.
This breaks builds:
3355 | << SchedModel->getResourceName(CurrZone.getZoneCritResIdx()) << "\n";
| ~~~~~~~~~~ ^
/home/buildbot/workspace/bolt-aarch64-ubuntu-clang/llvm-project/llvm/lib/CodeGen/MachineScheduler.cpp:3358:51: error: no member named 'getResourceName' in 'llvm::TargetSchedModel'
3358 | LDBG() << " RemainingLimit: " << SchedModel->getResourceName(OtherCritIdx)
| ~~~~~~~~~~ ^
2 errors generated.
E.g. https://lab.llvm.org/buildbot/#/builders/128/builds/7522
|
|
(#161997)
These lines are heavily skewed and hard to read. Using the new LDBG
there instead.
NFC.
|
|
(#160145)
It is unnecessary and confusing to have a do/while loop that checks
SU->isScheduled as this should never be true.
ScheduleDAGMI::updateQueues() is always called after pickNode() and it
sets isScheduled on the SU. Turn this into an assertion instead.
|
|
|
|
overridePostRASchedPolicy (#149297)
This patch updates `overrideSchedPolicy` and `overridePostRASchedPolicy`
to take a
`SchedRegion` parameter instead of just `NumRegionInstrs`. This provides
access to both the
instruction range and the parent `MachineBasicBlock`, which enables
looking up function-level
attributes.
With this change, targets can select post-RA scheduling direction per
function using a function
attribute. For example:
```cpp
void overridePostRASchedPolicy(MachineSchedPolicy &Policy,
const SchedRegion &Region) const {
const Function &F = Region.RegionBegin->getMF()->getFunction();
Attribute Attr = F.getFnAttribute("amdgpu-post-ra-direction");
...
}
|
|
std::tie clearly expresses the intent while slightly shortening the
code.
|
|
The existing way of managing clustered nodes was done through adding
weak edges between the neighbouring cluster nodes, which is a sort of
ordered queue. And this will be later recorded as `NextClusterPred` or
`NextClusterSucc` in `ScheduleDAGMI`.
But actually the instruction may be picked not in the exact order of the
queue. For example, we have a queue of cluster nodes A B C. But during
scheduling, node B might be picked first, then it will be very likely
that we only cluster B and C for Top-Down scheduling (leaving A alone).
Another issue is:
```
if (!ReorderWhileClustering && SUa->NodeNum > SUb->NodeNum)
std::swap(SUa, SUb);
if (!DAG->addEdge(SUb, SDep(SUa, SDep::Cluster)))
```
may break the cluster queue.
For example, we want to cluster nodes (order as in `MemOpRecords`): 1 3
2. 1(SUa) will be pred of 3(SUb) normally. But when it comes to (3, 2),
As 3(SUa) > 2(SUb), we would reorder the two nodes, which makes 2 be
pred of 3. This makes both 1 and 2 become preds of 3, but there is no
edge between 1 and 2. Thus we get a broken cluster chain.
To fix both issues, we introduce an unordered set in the change. This
could help improve clustering in some hard case.
One key reason the change causes so many test check changes is: As the
cluster candidates are not ordered now, the candidates might be picked
in different order from before.
The most affected targets are: AMDGPU, AArch64, RISCV.
For RISCV, it seems to me most are just minor instruction reorder, don't
see obvious regression.
For AArch64, there were some combining of ldr into ldp being affected.
With two cases being regressed and two being improved. This has more
deeper reason that machine scheduler cannot cluster them well both
before and after the change, and the load combine algorithm later is
also not smart enough.
For AMDGPU, some cases have more v_dual instructions used while some are
regressed. It seems less critical. Seems like test `v_vselect_v32bf16`
gets more buffer_load being claused.
|
|
We rename `createGenericSchedLive` and `createGenericSchedPostRA`
to `createSchedLive` and `createSchedPostRA`, and add a template
parameter `Strategy` which is the generic implementation by default.
This can simplify some code for targets that have custom scheduler
strategy.
|
|
When a node is picked, we should reset its next cluster candidate to
null before releasing its successors/predecessors.
|
|
|
|
When diagnosing scheduling issues it can be useful to know which
heuristics are driving the scheduler. This adds pre-RA and post-RA
statistics for all heuristics.
|
|
When diagnosing scheduler issues it can be useful to know how scheduling
changes the order of instructions, particularly for large functions when
it's not trivial to figure out from the debug output by looking at the
scheduling unit (SU) IDs.
This adds pre-RA and post-RA statistics to track 1) the number of
instructions that remain in source order after scheduling and 2) the
total number of instructions scheduled, to compare 1) against.
|
|
(#137988)
This flag instructs the scheduler to stop scheduling after N
instructions, but
in the debug output it appears as if it's scheduling N+1 instructions,
e.g.
$ llc -misched-cutoff=10 -debug-only=machine-scheduler
example.ll 2>&1 | grep "^Scheduling SU" | wc -l
11
as it calls pickNode before calling checkSchedLimit.
|
|
This change removes the uint64_t constructor on LocationSize
preventing implicit conversion, and fixes up the using APIs to adapt to
the change. Note that I'm adding a couple of explicit conversion points
on routines where passing in a fixed offset as an integer seems likely
to have well understood semantics.
We had an unfortunate case which arose if you tried to pass a TypeSize
value to a parameter of LocationSize type. We'd find the implicit
conversion path through TypeSize -> uint64_t -> LocationSize which works
just fine for fixed values, but looses information and fails assertions
if the TypeSize was scalable. This change breaks the first link in that
implicit conversion chain since that seemed to be the easier one.
|
|
(#134328)
While we already have some detailed debug messages on the candidate
selection process -- which selects a SUnit from the Available queue, we
didn't say much about why a SUnit was _not_ moved from Pending queue to
Available queue in the first place, which is just as important as why we
scheduled a node IMHO. Therefore, I added some debug prints for this
very purpose.
I decide to print these extra messages by default (instead of being
guarded by command line like `-misched-detail-resource-booking`) because
we have been printing some of the hazard remarks, so I thought we might
as well print these new messages -- which are mostly about hazard -- by
default.
|
|
|
|
|
|
Following 15e295d the machine scheduler no longer filters-out single-MI
regions when emitting regions to schedule. While this has no functional
impact at the moment, it generally has a negative compile-time impact
(see #128739).
Since all targets but AMDGPU do not care for this behavior, this
introduces an off-by-default flag to `ScheduleDAGInstrs` to control
whether such regions are going to be scheduled, effectively reverting
15e295d for all targets but AMDGPU (currently the only target enabling
this flag).
|
|
|
|
#125983
|
|
The MI scheduler skips regions containing a single MI during scheduling.
This can prevent targets that perform multi-stage scheduling and move
MIs between regions during some stages to reason correctly about the
entire IR, since some MIs will not be assigned to a region at the
beginning.
This makes the machine scheduler no longer skip single-MI regions. Only
a few unit tests are affected (mainly those which check for the
scheduler's debug output).
|
|
For debugging, distinguish the first valid candidate encountered and
a preference decision driven by node number.
|
|
Register::isPhysicalRegister. NFC"
This reverts commit 5fadb3d680909ab30b37eb559f80046b5a17045e.
|
|
Prefer the nonstatic member by converting unsigned to Register instead.
|
|
Heuristic was removed in 46533e614b78 due to being ineffective.
|
|
`RegisterClassInfo` was supposed to be kept alive between pass runs,
which wasn't being done leading to recomputations increasing the compile
time.
Now the Impl class is a member of the legacy and new passes so that it
is not reconstructed on every pass run.
---------
Co-authored-by: Christudasan Devadasan <christudasan.devadasan@amd.com>
|
|
This reverts commit 5aa4979c47255770cac7b557f3e4a980d0131d69 while I
investigate what's causing the compile-time regression.
|
|
Changes:
1. Fix inconsistencies in register pressure set printing. "Max Pressure"
printing is inconsistent with "Bottom Pressure" and "Top Pressure".
For the former, register class begins on the same line vs newline for
latter. Also for the former, the first register class is on the same
line, but subsequent register classes are newline separated. That's
removed so all are on the same line.
Before:
Max Pressure: FPR8=1
GPR32=14
Top Pressure:
GPR32=2
Bottom Pressure:
FPR8=7
GPR32=17
After:
Max Pressure: FPR8=1 GPR32=14
Top Pressure: GPR32=2
Bottom Pressure: FPR8=7 GPR32=17
2. After scheduling an instruction, don't print pressure diff if there
isn't one. Also s/UpdateRegP/UpdateRegPressure. E.g.,
Before:
UpdateRegP: SU(3) %0:gpr64common = ADDXrr %58:gpr64common, gpr64
to
UpdateRegP: SU(4) %393:gpr64sp = ADDXri %58:gpr64common, 390, 12
to GPR32 -1
After:
UpdateRegPressure: SU(4) %393:gpr64sp = ADDXri %58:gpr64common, 12
to GPR32 -1
3. Don't print excess pressure sets if there are none.
|
|
|
|
|
|
The createSIMachineScheduler & createPostMachineScheduler
target hooks are currently placed in the PassConfig interface.
Moving it out to TargetMachine so that both legacy and
the new pass manager can effectively use them.
|
|
This holds a physical register unit or virtual register and mask.
While I was here I've used emplace_back and removed an unneeded use of a
template.
|
|
For pre-ra scheduling, we use two options `-misched-topdown` and
`-misched-bottomup` to force the direction.
While for post-ra scheduling, we use `-misched-postra-direction`
with enumerated values (`topdown`, `bottomup` and `bidirectional`).
This is not unified and adds some mental burdens. Here we replace
these two options `-misched-topdown` and `-misched-bottomup` with
`-misched-prera-direction` with the same enumerated values.
To avoid the condition of `getNumOccurrences() > 0`, we add a new
enum value `Unspecified` and make it the default initial value.
These options are hidden, so we needn't keep the compatibility.
|
|
We support bottom-up and bidirectonal postra scheduling now, but we
only compare successive next cluster node as if we are doing topdown
scheduling. This makes load/store clustering and macro fusions wrong.
This patch makes sure that we can get the right cluster node by the
scheduling direction.
|
|
In #83875, we changed the type of `Width` to `LocationSize`. To get
the clsuter bytes, we use `LocationSize::getValue()` to calculate
the value.
But when `Width` is an unknown size `LocationSize`, an assertion
"Getting value from an unknown LocationSize!" will be triggered.
This patch simply skips MemOp with unknown size to fix this issue
and keep the logic the same as before.
This issue was found when implementing software pipeliner for
RISC-V in #117546. The pipeliner may clone some memory operations
with `BeforeOrAfterPointer` size.
|
|
We may do bottom-up or bidirectional scheduling but previously we
assume we are doing top-down scheduling, which may cause some issues.
|
|
PostRA scheduling supports different directions now, but we can
only specify it via command line options.
This patch adds a new hook `overridePostRASchedPolicy` for targets
to override PostRA scheduling policy.
Note that some options like tracking register pressure won't take
effect in PostRA scheduling.
|
|
Previously we set the dump direction according to command line
options, but we may override the scheduling direction in `initPolicy`
and this results in mismatch between dump and actual policy.
Here we simply set the dump direction after initializing the policy.
|
|
This produces far too much terminal output, particularly for the
instruction reduction. Since it doesn't consider the liveness of of
the instructions it's deleting, it produces quite a lot of verifier
errors.
|
|
This patch is part of a set of patches that add an `-fextend-lifetimes`
flag to clang, which extends the lifetimes of local variables and
parameters for improved debuggability. In addition to that flag, the
patch series adds a pragma to selectively disable `-fextend-lifetimes`,
and an `-fextend-this-ptr` flag which functions as `-fextend-lifetimes`
for this pointers only. All changes and tests in these patches were
written by Wolfgang Pieb (@wolfy1961), while Stephen Tozer (@SLTozer)
has handled review and merging. The extend lifetimes flag is intended to
eventually be set on by `-Og`, as discussed in the RFC
here:
https://discourse.llvm.org/t/rfc-redefine-og-o1-and-add-a-new-level-of-og/72850
This patch implements a new intrinsic instruction in LLVM,
`llvm.fake.use` in IR and `FAKE_USE` in MIR, that takes a single operand
and has no effect other than "using" its operand, to ensure that its
operand remains live until after the fake use. This patch does not emit
fake uses anywhere; the next patch in this sequence causes them to be
emitted from the clang frontend, such that for each variable (or this) a
fake.use operand is inserted at the end of that variable's scope, using
that variable's value. This patch covers everything post-frontend, which
is largely just the basic plumbing for a new intrinsic/instruction,
along with a few steps to preserve the fake uses through optimizations
(such as moving them ahead of a tail call or translating them through
SROA).
Co-authored-by: Stephen Tozer <stephen.tozer@sony.com>
|
|
|
|
- Add `LiveIntervalsAnalysis`.
- Add `LiveIntervalsPrinterPass`.
- Use `LiveIntervalsWrapperPass` in legacy pass manager.
- Use `std::unique_ptr` instead of raw pointer for `LICalc`, so
destructor and default move constructor can handle it correctly.
This would be the last analysis required by `PHIElimination`.
|
|
- Add `SlotIndexesAnalysis`.
- Add `SlotIndexesPrinterPass`.
- Use `SlotIndexesWrapperPass` in legacy pass.
|
|
- Add `MachineLoopAnalysis`.
- Add `MachineLoopPrinterPass`.
- Convert to `MachineLoopInfoWrapperPass` in legacy pass manager.
|
|
Since `raw_string_ostream` doesn't own the string buffer, it is
desirable (in terms of memory safety) for users to directly reference
the string buffer rather than use `raw_string_ostream::str()`.
Work towards TODO comment to remove `raw_string_ostream::str()`.
|
|
result (#94571)
Prepare for new pass manager version of `MachineDominatorTreeAnalysis`.
We may need a machine dominator tree version of `DomTreeUpdater` to
handle `SplitCriticalEdge` in some CodeGen passes.
|
