| Age | Commit message (Collapse) | Author |
|---|
|
The architectures provided to skipIf / expectedFail are regular
expressions (v. _match_decorator_property() in decorators.py
so on Darwin systems "arm64" would match the skips for "arm" (32-bit
Linux). Update these to "arm$" to prevent this, and also update
three tests (TestBuiltinFormats.py, TestCrossDSOTailCalls.py,
TestCrossObjectTailCalls.py) that were skipped for arm64 via this
behavior, and need to be skipped or they will fail.
This was moviated by the new TestDynamicValue.py test which has
an expected-fail for arm, but the test was passing on arm64 Darwin
resulting in failure for the CIs.
|
|
test_common is force-included into every compilation, which causes
problems when we're compiling assembly code, as we were in #138805.
This avoids that as we can include the header only when it's needed.
|
|
The unicode test sends some unicode input to lldb through pexpect and
expects the output to be echoed back in an error message. This only
works correctly when editline was compiled with wide character support.
This commit modifies the test to require the necessary libedit
configuration.
|
|
Co-authored-by: Eisuke Kawashima <e-kwsm@users.noreply.github.com>
|
|
See #120021 for details.
|
|
This test caused python crash on Windows x86_64 host with the exit code
0xC0000409 (STATUS_STACK_BUFFER_OVERRUN). Close the input stream before
exit to avoid this crash.
|
|
using the macOS version as a proxy. I can't reproduce any of these
failures locally, but the tests all use pexpect and probably have bad
timeout behavior under high load.
|
|
We just forget to check for interrupt while waiting for the answer to the prompt. But if we are in the interrupt state then the lower
layers of the EditLine code just eat all characters so we never get out of the query prompt. You're pretty much stuck and have to kill lldb.
The solution is to check for the interrupt. The patch is a little bigger because where I needed to check the Interrupt state I only
had the ::EditLine object, but the editor state is held in lldb's EditLine wrapper, so I had to do a little work to get my hands on it.
|
|
This is an ongoing series of commits that are reformatting our Python
code. Reformatting is done with `black` (23.1.0).
If you end up having problems merging this commit because you have made
changes to a python file, the best way to handle that is to run `git
checkout --ours <yourfile>` and then reformat it with black.
RFC: https://discourse.llvm.org/t/rfc-document-and-standardize-python-code-style
Differential revision: https://reviews.llvm.org/D151460
|
|
Eliminate boilerplate of having each test manually assign to `mydir` by calling
`compute_mydir` in lldbtest.py.
Differential Revision: https://reviews.llvm.org/D128077
|
|
This should fix the issues introduced by d71d1a9, which skipped all the
test setup commands.
This also fixes the test failures happening in TestAutosuggestion.py.
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
|
|
This reverts commit 80589f272c200798b57a5151680a993bc2cc00a7.
|
|
This is very likely to be caused by d71d1a947bee1247e952f22c13ad3ed3d041e36a.
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
|
|
|
|
This patch skips TestProcessIOHandlerInterrupt on Arm/AArch64.
PExpect tests are not stable when run in containerized machine.
|
|
The small value was not meant to be checked in.
|
|
On darwin, we don't completely suppress the signal used to interrupt the
inferior. The underlying read syscall returns EINTR, which causes premature
termination of the input loop.
Work around that by hand-rolling an EINTR-resistant version of getline.
|
|
D120762 accidentally moved the interrupt check into the block which was
reading stdio. This meant that a ^C only took effect after a regular
character has been pressed.
This patch fixes that and adds a (pexpect) test.
Differential Revision: https://reviews.llvm.org/D121912
|
|
This patch disables TestIOHandlerProcessSTDIO.py for Arm/AArch64 Linux
to silence random test failures on buildbots. IO handler tests are known
to randomly fail on arm/aarch64 linux buildbots due to pexpect timeouts.
|
|
I'm a big fan of the autosuggestion feature but my terminal/color scheme
doesn't display faint any differently than regular lldb output, which
makes the feature a little confusing. This patch add a setting to change
the autosuggestion ANSI escape codes.
For example, to display the autosuggestion in italic, you can add this
to your ~/.lldbinit
settings set show-autosuggestion-ansi-prefix ${ansi.italic}
setting set show-autosuggestion-ansi-suffix ${ansi.normal}
Differential revision: https://reviews.llvm.org/D121064
|
|
The check for the prompt isn't essential for this test. The check fail
on the lldb-arm-ubuntu because of what appears to be a missing space
after the prompt. Rather than disabling the test, let's see if we can
get it to pass without it.
|
|
This patch fixes a data race in IOHandlerProcessSTDIO. The race is
happens between the main thread and the event handling thread. The main
thread is running the IOHandler (IOHandlerProcessSTDIO::Run()) when an
event comes in that makes us pop the process IO handler which involves
cancelling the IOHandler (IOHandlerProcessSTDIO::Cancel). The latter
calls SetIsDone(true) which modifies m_is_done. At the same time, we
have the main thread reading the variable through GetIsDone().
This patch avoids the race by using a mutex to synchronize the two
threads. On the event thread, in IOHandlerProcessSTDIO ::Cancel method,
we obtain the lock before changing the value of m_is_done. On the main
thread, in IOHandlerProcessSTDIO::Run(), we obtain the lock before
reading the value of m_is_done. Additionally, we delay calling SetIsDone
until after the loop exists, to avoid a potential race between the two
writes.
Write of size 1 at 0x00010b66bb68 by thread T7 (mutexes: write M2862, write M718324145051843688):
#0 lldb_private::IOHandler::SetIsDone(bool) IOHandler.h:90 (liblldb.15.0.0git.dylib:arm64+0x971d84)
#1 IOHandlerProcessSTDIO::Cancel() Process.cpp:4382 (liblldb.15.0.0git.dylib:arm64+0x5ddfec)
#2 lldb_private::Debugger::PopIOHandler(std::__1::shared_ptr<lldb_private::IOHandler> const&) Debugger.cpp:1156 (liblldb.15.0.0git.dylib:arm64+0x3cb2a8)
#3 lldb_private::Debugger::RemoveIOHandler(std::__1::shared_ptr<lldb_private::IOHandler> const&) Debugger.cpp:1063 (liblldb.15.0.0git.dylib:arm64+0x3cbd2c)
#4 lldb_private::Process::PopProcessIOHandler() Process.cpp:4487 (liblldb.15.0.0git.dylib:arm64+0x5c583c)
#5 lldb_private::Debugger::HandleProcessEvent(std::__1::shared_ptr<lldb_private::Event> const&) Debugger.cpp:1549 (liblldb.15.0.0git.dylib:arm64+0x3ceabc)
#6 lldb_private::Debugger::DefaultEventHandler() Debugger.cpp:1622 (liblldb.15.0.0git.dylib:arm64+0x3cf2c0)
#7 std::__1::__function::__func<lldb_private::Debugger::StartEventHandlerThread()::$_2, std::__1::allocator<lldb_private::Debugger::StartEventHandlerThread()::$_2>, void* ()>::operator()() function.h:352 (liblldb.15.0.0git.dylib:arm64+0x3d1bd8)
#8 lldb_private::HostNativeThreadBase::ThreadCreateTrampoline(void*) HostNativeThreadBase.cpp:62 (liblldb.15.0.0git.dylib:arm64+0x4c71ac)
#9 lldb_private::HostThreadMacOSX::ThreadCreateTrampoline(void*) HostThreadMacOSX.mm:18 (liblldb.15.0.0git.dylib:arm64+0x29ef544)
Previous read of size 1 at 0x00010b66bb68 by main thread:
#0 lldb_private::IOHandler::GetIsDone() IOHandler.h:92 (liblldb.15.0.0git.dylib:arm64+0x971db8)
#1 IOHandlerProcessSTDIO::Run() Process.cpp:4339 (liblldb.15.0.0git.dylib:arm64+0x5ddc7c)
#2 lldb_private::Debugger::RunIOHandlers() Debugger.cpp:982 (liblldb.15.0.0git.dylib:arm64+0x3cb48c)
#3 lldb_private::CommandInterpreter::RunCommandInterpreter(lldb_private::CommandInterpreterRunOptions&) CommandInterpreter.cpp:3298 (liblldb.15.0.0git.dylib:arm64+0x506478)
#4 lldb::SBDebugger::RunCommandInterpreter(bool, bool) SBDebugger.cpp:1166 (liblldb.15.0.0git.dylib:arm64+0x53604)
#5 Driver::MainLoop() Driver.cpp:634 (lldb:arm64+0x100006294)
#6 main Driver.cpp:853 (lldb:arm64+0x100007344)
Differential revision: https://reviews.llvm.org/D120762
|
|
The current dectorator (@skipIfLinux) will skip the test if the lldb
platform is the linux platform, but the issue is with the OS that lldb
is running on, not the OS that lldb is debugging. Update the decorator
to skip the test if the host is Linux.
Thank you Ted Woodward for pointing this out.
|
|
TestIOHandlerPythonREPLSigint.py is running falky on AArch64/Linux
buildbot failing randomly. Skipping it for AArch64/Linux as well.
|
|
TestIOHandlerPythonREPLSigint.py is failing on Arm/Linux buildbot. I am
marking it as skip for now.
|
|
When LLDB receives a SIGINT while running the embedded Python REPL it
currently just crashes in ScriptInterpreterPythonImpl::Interrupt with an
error such as the one below:
Fatal Python error: PyThreadState_Get: the function must be called
with the GIL held, but the GIL is released (the current Python thread
state is NULL)
The faulty code that causes this error is this part of
ScriptInterpreterPythonImpl::Interrupt:
PyThreadState *state = PyThreadState_GET();
if (!state)
state = GetThreadState();
if (state) {
long tid = state->thread_id;
PyThreadState_Swap(state);
int num_threads = PyThreadState_SetAsyncExc(tid, PyExc_KeyboardInterrupt);
The obvious fix I tried is to just acquire the GIL before this code is
running which fixes the crash but the KeyboardInterrupt we want to raise
immediately is actually just queued and would only be raised once the
next line of input has been parsed (which e.g. won't interrupt Python
code that is currently waiting on a timer or IO from what I can see).
Also none of the functions we call here is marked as safe to be called
from a signal handler from what I can see, so we might still end up
crashing here with some bad timing.
Python 3.2 introduced PyErr_SetInterrupt to solve this and the function
takes care of all the details and avoids doing anything that isn't safe
to do inside a signal handler. The only thing we need to do is to
manually setup our own fake SIGINT handler that behaves the same way as
the standalone Python REPL signal handler (which raises a
KeyboardInterrupt).
From what I understand the old code used to work with Python 2 so I kept
the old code around until we officially drop support for Python 2.
There is a small gap here with Python 3.0->3.1 where we might still be
crashing, but those versions have reached their EOL more than a decade
ago so I think we don't need to bother about them.
Differential revision: https://reviews.llvm.org/D104886
|
|
This reverts commit cef1e07cc6d00b5b429d77133201e1f404a8023c.
It broke the windows bot.
|
|
When LLDB receives a SIGINT while running the embedded Python REPL it currently
just crashes in `ScriptInterpreterPythonImpl::Interrupt` with an error such as
the one below:
```
Fatal Python error: PyThreadState_Get: the function must be called with the GIL
held, but the GIL is released (the current Python thread state is NULL)
```
The faulty code that causes this error is this part of `ScriptInterpreterPythonImpl::Interrupt`:
```
PyThreadState *state = PyThreadState_GET();
if (!state)
state = GetThreadState();
if (state) {
long tid = state->thread_id;
PyThreadState_Swap(state);
int num_threads = PyThreadState_SetAsyncExc(tid, PyExc_KeyboardInterrupt);
```
The obvious fix I tried is to just acquire the GIL before this code is running
which fixes the crash but the `KeyboardInterrupt` we want to raise immediately
is actually just queued and would only be raised once the next line of input has
been parsed (which e.g. won't interrupt Python code that is currently waiting on
a timer or IO from what I can see). Also none of the functions we call here is
marked as safe to be called from a signal handler from what I can see, so we
might still end up crashing here with some bad timing.
Python 3.2 introduced `PyErr_SetInterrupt` to solve this and the function takes
care of all the details and avoids doing anything that isn't safe to do inside a
signal handler. The only thing we need to do is to manually setup our own fake
SIGINT handler that behaves the same way as the standalone Python REPL signal
handler (which raises a KeyboardInterrupt).
From what I understand the old code used to work with Python 2 so I kept the old
code around until we officially drop support for Python 2.
There is a small gap here with Python 3.0->3.1 where we might still be crashing,
but those versions have reached their EOL more than a decade ago so I think we
don't need to bother about them.
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D104886
|
|
This patch removes the infrastructure to replay the test suite from a
reproducer, as well as the modifications made to the individual tests.
|
|
file path.
When I run a lldb command that uses filename completion, if I enter a string
that is not only a filename but also a string with a non-file name string added,
such as "./" that is relative path string , it will crash as soon as I press the
[Tab] key. For example, debugging an executable file named "hello" that is
compiled from a file named "hello.c" , and I’ll put a breakpoint on line 3 of
hello.c.
```
$ lldb ./hello
(lldb) breakpoint set --file hello.c --line 3
```
This is not a problem, but if I set "--file ./hello." and then press [Tab] key
to complete file name, lldb crashes.
```
$ lldb ./hello
(lldb) breakpoint set --file ./hello.terminate called after throwing an instance of 'std::out_of_range'
what(): basic_string::substr: __pos (which is 8) > this->size() (which is 7)
```
The crash was caused because substr() (in lldb/source/Host/common/Editline.cpp)
cut out string which size is user's input string from the completion string.
I modified the code that erase the user's intput string from current line and
then add the completion string.
Differential Revision: https://reviews.llvm.org/D108817
|
|
Following tests fail on Arm/AArch64 randomly with timeouts:
TestMultilineNavigation.py
TestBatchMode.py
TestUnicode.py
TestGdbRemote_vContThreads.py
I am marking them as skipped until we find a away make to pass reliably.
|
|
Following LLDB tests fail randomly on LLDB Arm/AArch64 Linux buildbots.
We still not have a reliable solution for these tests to pass
consistently. I am marking them skipped for now.
TestBreakpointCallbackCommandSource.py
TestIOHandlerResize.py
TestEditline.py
TestGuiViewLarge.py
TestGuiExpandThreadsTree.py
TestGuiBreakpoints.py
|
|
Following tests have been failing randomly on LLDB Arm and AArch64 Linux
builtbots:
TestMultilineNavigation.py
TestMultilineCompletion.py
TestIOHandlerCompletion.py
TestGuiBasic.py
I have increased allocated CPU resources to these bots but it has not
improved situation to an acceptable level. This patch marks them as
skipped on Arm/AArch64 for now.
|
|
|
|
This is relanding D81001. The patch originally failed as on newer editline
versions it seems CC_REFRESH will move the cursor to the start of the line via
\r and then back to the original position. On older editline versions like
the one used by default on macOS, CC_REFRESH doesn't move the cursor at all.
As the patch changed the way we handle tab completion (previously we did
REDISPLAY but now we're doing CC_REFRESH), this caused a few completion tests
to receive this unexpected cursor movement in the output stream.
This patch updates those tests to also accept output that contains the specific
cursor movement commands (\r and then \x1b[XC). lldbpexpect.py received an
utility method for generating the cursor movement escape sequence.
Original summary:
I implemented autosuggestion if there is one possible suggestion.
I set the keybinds for every character. When a character is typed, Editline::TypedCharacter is called.
Then, autosuggestion part is displayed in gray, and you can actually input by typing C-k.
Editline::Autosuggest is a function for finding completion, and it is like Editline::TabCommand now, but I will add more features to it.
Testing does not work well in my environment, so I can't confirm that it goes well, sorry. I am dealing with it now.
Reviewed By: teemperor, JDevlieghere, #lldb
Differential Revision: https://reviews.llvm.org/D81001
|
|
suggestion"
This reverts commit 246afe0cd17fce935a01171f3cca548e02523e5c. This broke
the following tests on Linux it seems:
lldb-api :: commands/expression/multiline-completion/TestMultilineCompletion.py
lldb-api :: iohandler/completion/TestIOHandlerCompletion.py
|
|
I implemented autosuggestion if there is one possible suggestion.
I set the keybinds for every character. When a character is typed, Editline::TypedCharacter is called.
Then, autosuggestion part is displayed in gray, and you can actually input by typing C-k.
Editline::Autosuggest is a function for finding completion, and it is like Editline::TabCommand now, but I will add more features to it.
Testing does not work well in my environment, so I can't confirm that it goes well, sorry. I am dealing with it now.
Reviewed By: teemperor, JDevlieghere, #lldb
Differential Revision: https://reviews.llvm.org/D81001
|
|
It seems opening the empty file and trying use that file object as an input
stream doesn't work on Windows. Skipping it for now.
|
|
io.BytesIO seems to produce a stream in Python 2 which isn't recognized
as a file object in the SWIG API, so this test fails for Python 2 (and I assume
also an old SWIG version needs to be involved).
Instead just open an empty input file which is a file object in all Python
versions to make this test pass everywhere.
|
|
|
|
editline backend
Summary:
TerminalSizeChanged is called from our SIGWINCH signal handler but the
IOHandlerEditline currently doesn't check if we are actually using the real
editline backend. If we're not using the real editline backend, `m_editline_up`
won't be set and `IOHandlerEditline::TerminalSizeChanged` will access
the empty unique_ptr. In a real use case we don't use the editline backend
when we for example read input from a file. We also create some temporary
IOHandlerEditline's during LLDB startup it seems that are also treated
as non-interactive (apparently to read startup commands).
This patch just adds a nullptr check for`m_editline_up` as we do in the rest of
IOHandlerEditline.
Fixes rdar://problem/63921950
Reviewers: labath, friss
Reviewed By: friss
Subscribers: abidh, JDevlieghere
Differential Revision: https://reviews.llvm.org/D81729
|
|
Summary:
The comment in the Editine.h header made it sound like editline was
just unable to handle terminal resizing. We were not ever telling
editline that the terminal had changed size, which might explain why
it wasn't working.
This patch threads a `TerminalSizeChanged()` callback through the
IOHandler and invokes it from the SIGWINCH handler in the driver. Our
`Editline` class already had a `TerminalSizeChanged()` method which
was invoked only when editline was configured.
This patch also changes `Editline` to not apply the changes right away
in `TerminalSizeChanged()`, but instead defer that to the next
character read. During my testing, it happened once that the signal
was received while our `ConnectionFileDescriptor::Read` was allocating
memory. As `el_resize` seems to allocate memory too, this crashed.
Reviewers: labath, teemperor
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D79654
|
|
Summary: Moves lldbsuite tests to lldb/test/API.
This is a largely mechanical change, moved with the following steps:
```
rm lldb/test/API/testcases
mkdir -p lldb/test/API/{test_runner/test,tools/lldb-{server,vscode}}
mv lldb/packages/Python/lldbsuite/test/test_runner/test lldb/test/API/test_runner
for d in $(find lldb/packages/Python/lldbsuite/test/* -maxdepth 0 -type d | egrep -v "make|plugins|test_runner|tools"); do mv $d lldb/test/API; done
for d in $(find lldb/packages/Python/lldbsuite/test/tools/lldb-vscode -maxdepth 1 -mindepth 1 | grep -v ".py"); do mv $d lldb/test/API/tools/lldb-vscode; done
for d in $(find lldb/packages/Python/lldbsuite/test/tools/lldb-server -maxdepth 1 -mindepth 1 | egrep -v "gdbremote_testcase.py|lldbgdbserverutils.py|socket_packet_pump.py"); do mv $d lldb/test/API/tools/lldb-server; done
```
lldb/packages/Python/lldbsuite/__init__.py and lldb/test/API/lit.cfg.py were also updated with the new directory structure.
Reviewers: labath, JDevlieghere
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D71151
|
