| Age | Commit message (Collapse) | Author |
|---|
|
The test reads 400 bytes of memory above the local variable. If the
stack is shallow, this can reach non-allocated space, resulting in a
test failure. The patch fixes the issue by reserving enough space in
the upper stack frame.
|
|
(#144036)
We now bubble up the expression evaluation diagnostics to the user and
also distinguish between "expression failed to parse/run" versus other
ways in which expressions didn't complete (e.g., setup errors, etc.).
Before:
```
(lldb) memory find -e "" 0x16fdfedc0 0x16fdfede0
error: expression evaluation failed. pass a string instead
(lldb) memory find -e "invalid" 0x16fdfedc0 0x16fdfede0
error: expression evaluation failed. pass a string instead
```
After:
```
(lldb) memory find -e "" 0x16fdfedc0 0x16fdfede0
error: Expression evaluation failed:
error: No result returned from expression. Exit status: 1
(lldb) memory find -e "invalid" 0x16fdfedc0 0x16fdfede0
error: Expression evaluation failed:
error: <user expression 0>:1:1: use of undeclared identifier 'invalid'
1 | invalid
| ^~~~~~~
```
|
|
(#143686)
This patch factors out the `-e` option logic into two helper functions.
The `EvaluateExpression` helper might seem redundant but I'll be adding
to it in a follow-up patch to fix an issue when running `memory find -e`
for Swift targets.
Also adds test coverage for the error cases that were previously
untested.
rdar://152113525
|
|
This patch fixes an issue where the `memory find` command would
effectively stop searching after encountering a memory read error (which
could happen due to unreadable memory), without giving any indication
that it has done so (it would just print it could not find the pattern).
To make matters worse, it would not terminate after encountering this
error, but rather proceed to slowly increment the address pointer, which
meant that searching a large region could take a very long time (and
give the appearance that lldb is actually searching for the thing).
The patch fixes this first problem by detecting read errors and
skipping over (using GetMemoryRegionInfo) the unreadable parts of memory
and resuming the search after them. It also reads the memory in bulk
(`max(sizeof(pattern))`), which speeds up the search significantly (up
to 6x for live processes, 18x for core files).
|
|
`memory read` will return an error if you try to read more than 1k bytes
in a single command, instructing you to set
`target.max-memory-read-size` or use `--force` if you intended to read
more than that. This is a safeguard for a command where people are being
explicit about how much memory they would like lldb to read (either to
display, or save to a file) and is an annoyance every time you need to
read more than a small amount. If someone confuses the --count argument
with the start address, lldb may begin dumping gigabytes of data but I'd
rather that behavior than requiring everyone to special-case their way
around a common use case.
I don't want to remove the setting because many people have added (much
larger) default max read sizes to their ~/.lldbinit files after hitting
this behavior. Another option would be to stop reading/using the value
in Target.cpp, but I see no harm in leaving the setting if someone
really does prefer to have a small cap on their memory read size.
|
|
ReadProcessMemory will not perform the read if part of the memory is
unreadable (and even though the API has a `number_of_bytes_read`
argument). To make this work, I explicitly inspect the memory region
being read and only read the accessible part.
|
|
Previously, we were returning an error if we couldn't read the whole
region. This doesn't matter most of the time, because lldb caches memory
reads, and in that process it aligns them to cache line boundaries. As
(LLDB) cache lines are smaller than pages, the reads are unlikely to
cross page boundaries.
Nonetheless, this can cause a problem for large reads (which bypass the
cache), where we're unable to read anything even if just a single byte
of the memory is unreadable. This patch fixes the lldb-server to do
that, and also changes the linux implementation, to reuse any partial
results it got from the process_vm_readv call (to avoid having to
re-read everything again using ptrace, only to find that it stopped at
the same place).
This matches debugserver behavior. It is also consistent with the gdb
remote protocol documentation, but -- notably -- not with actual
gdbserver behavior (which returns errors instead of partial results). We
filed a
[clarification
bug](https://sourceware.org/bugzilla/show_bug.cgi?id=24751) several
years ago. Though we did not really reach a conclusion there, I think
this is the most logical behavior.
The associated test does not currently pass on windows, because the
windows memory read APIs don't support partial reads (I have a WIP patch
to work around that).
|
|
TargetProperties.td had a few settings listed as signed integral values,
but the Target.cpp methods reading those values were reading them as
unsigned. e.g. target.max-memory-read-size, some accesses of
target.max-children-count, still today, previously
target.max-string-summary-length.
After Jonas' change to use templates to read these values in
https://reviews.llvm.org/D149774, when the code tried to fetch these
values, we'd eventually end up calling OptionValue::GetAsUInt64 which
checks that the value is actually a UInt64 before returning it; finding
that it was an SInt64, it would drop the user setting and return the
default value. This manifested as a bug that target.max-memory-read-size
is never used for memory read.
target.max-children-count is less straightforward, where one read of
that setting was fetching it as an int64_t, the other as a uint64_t.
I suspect all of these settings were originally marked as SInt64 so a
user could do -1 for "infinite", getting it static_cast to a UINT64_MAX
value along the way. I can't find any documentation for this behavior,
but it seems like something Greg would have done. We've partially lost
that behavior already via
https://github.com/llvm/llvm-project/pull/72233 for
target.max-string-summary-length, and this further removes it.
We're still fetching UInt64's and returning them as uint32_t's but I'm
not overly pressed about someone setting a count/size limit over 4GB.
I added a simple API test for the memory read setting limit.
|
|
assertEquals is a deprecated alias for assertEqual and has been removed
in Python 3.12. This wasn't an issue previously because we used a
vendored version of the unittest module. Now that we use the built-in
version this gets updated together with the Python version used to run
the test suite.
|
|
This is an ongoing series of commits that are reformatting our Python
code. Reformatting is done with `black` (23.1.0).
If you end up having problems merging this commit because you have made
changes to a python file, the best way to handle that is to run `git
checkout --ours <yourfile>` and then reformat it with black.
RFC: https://discourse.llvm.org/t/rfc-document-and-standardize-python-code-style
Differential revision: https://reviews.llvm.org/D151460
|
|
I went over the output of the following mess of a command:
(ulimit -m 2000000; ulimit -v 2000000; git ls-files -z | parallel
--xargs -0 cat | aspell list --mode=none --ignore-case | grep -E
'^[A-Za-z][a-z]*$' | sort | uniq -c | sort -n | grep -vE '.{25}' |
aspell pipe -W3 | grep : | cut -d' ' -f2 | less)
and proceeded to spend a few days looking at it to find probable typos
and fixed a few hundred of them in all of the llvm project (note, the
ones I found are not anywhere near all of them, but it seems like a
good start).
Differential revision: https://reviews.llvm.org/D131122
|
|
Eliminate boilerplate of having each test manually assign to `mydir` by calling
`compute_mydir` in lldbtest.py.
Differential Revision: https://reviews.llvm.org/D128077
|
|
Given that you'd never find empty string, just error.
Also add a test that an invalid expr generates an error.
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D123793
|
|
This reverts commit 859ebca744e634dcc89a2294ffa41574f947bd62.
The change contained many unrelated changes and e.g. restored
unit test failes for the old lld port.
|
|
This reverts commit 640beb38e7710b939b3cfb3f4c54accc694b1d30.
That commit caused performance degradtion in Quicksilver test QS:sGPU and a functional test failure in (rocPRIM rocprim.device_segmented_radix_sort).
Reverting until we have a better solution to s_cselect_b64 codegen cleanup
Change-Id: Ibf8e397df94001f248fba609f072088a46abae08
Reviewed By: kzhuravl
Differential Revision: https://reviews.llvm.org/D115960
Change-Id: Id169459ce4dfffa857d5645a0af50b0063ce1105
|
|
Our test infrastructure does not like two tests with the same name, but
it makes sense to do it regardless, as they are testing the same
command.
|
|
Testing the breakpoint itself rather than the lldb string.
Differential Revision: https://reviews.llvm.org/D111899
|
|
This patch removes the infrastructure to replay the test suite from a
reproducer, as well as the modifications made to the individual tests.
|
|
This adds a new command for writing memory tags.
It is based on the existing "memory write" command.
Syntax: memory tag write <address-expression> <value> [<value> [...]]
(where "value" is a tag value)
(lldb) memory tag write mte_buf 1 2
(lldb) memory tag read mte_buf mte_buf+32
Logical tag: 0x0
Allocation tags:
[0xfffff7ff9000, 0xfffff7ff9010): 0x1
[0xfffff7ff9010, 0xfffff7ff9020): 0x2
The range you are writing to will be calculated by
aligning the address down to a granule boundary then
adding as many granules as there are tags.
(a repeating mode with an end address will be in a follow
up patch)
This is why "memory tag write" uses MakeTaggedRange but has
some extra steps to get this specific behaviour.
The command does all the usual argument validation:
* Address must evaluate
* You must supply at least one tag value
(though lldb-server would just treat that as a nop anyway)
* Those tag values must be valid for your tagging scheme
(e.g. for MTE the value must be > 0 and < 0xf)
* The calculated range must be memory tagged
That last error will show you the final range, not just
the start address you gave the command.
(lldb) memory tag write mte_buf_2+page_size-16 6
(lldb) memory tag write mte_buf_2+page_size-16 6 7
error: Address range 0xfffff7ffaff0:0xfffff7ffb010 is not in a memory tagged region
(note that we do not check if the region is writeable
since lldb can write to it anyway)
The read and write tag tests have been merged into
a single set of "tag access" tests as their test programs would
have been almost identical.
(also I have renamed some of the buffers to better
show what each one is used for)
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D105182
|
|
This patch adds a helper function to test target architecture is
AArch64 or not. This also tightens isAArch64* helpers by adding an
extra architecture check.
Reviewed By: DavidSpickett
Differential Revision: https://reviews.llvm.org/D105483
|
|
This corrects the test added in
31f9960c38529ce805edf9764535eb0ce188cadf
and temporarily patched in
3b4aad1186e8e8e6f6c7887cb5e8d9bfd7d3ce2f.
This test checks that the memory tag read
command errors when you use it on a platform
without memory tagging.
(which is why we skip the test if you actually
have MTE)
The problem with this test is that there's
two levels of unsupported each with it's own
specific error.
On anything that isn't AArch64, there's no
tagging extension we support. So you're told
that that is the case. As in "this won't ever work".
When you're on AArch64 we know that MTE could
be present on the remote and when we find that it
isn't, we tell you that instead.
Expect a different error message on AArch64 to fix
the test.
|
|
TestMemoryTag.py should fail if underlying target doesnt support MTE.
Differential Revision: https://reviews.llvm.org/D97285
|
|
This new command looks much like "memory read"
and mirrors its basic behaviour.
(lldb) memory tag read new_buf_ptr new_buf_ptr+32
Logical tag: 0x9
Allocation tags:
[0x900fffff7ffa000, 0x900fffff7ffa010): 0x9
[0x900fffff7ffa010, 0x900fffff7ffa020): 0x0
Important proprties:
* The end address is optional and defaults to reading
1 tag if ommitted
* It is an error to try to read tags if the architecture
or process doesn't support it, or if the range asked
for is not tagged.
* It is an error to read an inverted range (end < begin)
(logical tags are removed for this check so you can
pass tagged addresses here)
* The range will be expanded to fit the tagging granule,
so you can get more tags than simply (end-begin)/granule size.
Whatever you get back will always cover the original range.
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D97285
|
|
Remap the external file to the one embedded in the reproducer.
|
|
The memory read --outfile command should truncate the output when unless
--append-outfile. Fix the bug and add a test.
rdar://76062318
Differential revision: https://reviews.llvm.org/D99890
|
|
Follow up to D95813, this converts multiline assertTrue to assertEqual.
Differential Revision: https://reviews.llvm.org/D95899
|
|
Summary:
Around a third of our test sources have LLVM license headers. This patch removes those headers from all test
sources and also fixes any tests that depended on the length of the license header.
The reasons for this are:
* A few tests verify line numbers and will start failing if the number of lines in the LLVM license header changes. Once I landed my patch for valid SourceLocations in debug info we will probably have even more tests that verify line numbers.
* No other LLVM project is putting license headers in its test files to my knowledge.
* They make the test sources much more verbose than they have to be. Several tests have longer license headers than the actual test source.
For the record, the following tests had their line numbers changed to pass with the removal of the license header:
lldb-api :: functionalities/breakpoint/breakpoint_by_line_and_column/TestBreakpointByLineAndColumn.py
lldb-shell :: Reproducer/TestGDBRemoteRepro.test
lldb-shell :: Reproducer/TestMultipleTargets.test
lldb-shell :: Reproducer/TestReuseDirectory.test
lldb-shell :: ExecControl/StopHook/stop-hook-threads.test
lldb-shell :: ExecControl/StopHook/stop-hook.test
lldb-api :: lang/objc/exceptions/TestObjCExceptions.py
Reviewers: #lldb, espindola, JDevlieghere
Reviewed By: #lldb, JDevlieghere
Subscribers: emaste, aprantl, arphaman, JDevlieghere, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D74839
|
|
the test suite
Summary:
The error message from the construct `assertTrue(a == b, "msg") ` are nearly always completely useless for actually debugging the issue.
This patch is just replacing this construct (and similar ones like `assertTrue(a != b, ...)` with the proper call to assertEqual or assertNotEquals.
This patch was mostly written by a shell script with some manual verification afterwards:
```
lang=python
import sys
def sanitize_line(line):
if line.strip().startswith("self.assertTrue(") and " == " in line:
line = line.replace("self.assertTrue(", "self.assertEquals(")
line = line.replace(" == ", ", ", 1)
if line.strip().startswith("self.assertTrue(") and " != " in line:
line = line.replace("self.assertTrue(", "self.assertNotEqual(")
line = line.replace(" != ", ", ", 1)
return line
for a in sys.argv[1:]:
with open(a, "r") as f:
lines = f.readlines()
with open(a, "w") as f:
for line in lines:
f.write(sanitize_line(line))
```
Reviewers: labath, JDevlieghere
Reviewed By: labath
Subscribers: abidh, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D74475
|
|
Summary: Moves lldbsuite tests to lldb/test/API.
This is a largely mechanical change, moved with the following steps:
```
rm lldb/test/API/testcases
mkdir -p lldb/test/API/{test_runner/test,tools/lldb-{server,vscode}}
mv lldb/packages/Python/lldbsuite/test/test_runner/test lldb/test/API/test_runner
for d in $(find lldb/packages/Python/lldbsuite/test/* -maxdepth 0 -type d | egrep -v "make|plugins|test_runner|tools"); do mv $d lldb/test/API; done
for d in $(find lldb/packages/Python/lldbsuite/test/tools/lldb-vscode -maxdepth 1 -mindepth 1 | grep -v ".py"); do mv $d lldb/test/API/tools/lldb-vscode; done
for d in $(find lldb/packages/Python/lldbsuite/test/tools/lldb-server -maxdepth 1 -mindepth 1 | egrep -v "gdbremote_testcase.py|lldbgdbserverutils.py|socket_packet_pump.py"); do mv $d lldb/test/API/tools/lldb-server; done
```
lldb/packages/Python/lldbsuite/__init__.py and lldb/test/API/lit.cfg.py were also updated with the new directory structure.
Reviewers: labath, JDevlieghere
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D71151
|
