| Age | Commit message (Collapse) | Author |
|---|
|
To be able to describe discontinuous functions, this patch changes the
UnwindPlan to accept more than one address range.
I've also squeezed in a couple improvements/modernizations, for example
using the lower_bound function instead of a linear scan.
|
|
In most places, the rows are copied anyway (because they are generated
by cumulating modifications) immediately after adding them to the unwind
plans. In others, they can be moved into the unwind plan. This lets us
remove some backflip copies and make `const UnwindPlan` actually mean
something.
I've split this patch into two (and temporarily left both APIs) as this
patch was getting a bit big. This patch covers all the interesting
cases. Part two all about converting "architecture default" unwind plans
from ABI and InstructionEmulation plugins.
|
|
LineSeqeunce is basically a vector, except that users aren't supposed to
know that. This implements the same concept in a slightly simpler
fashion.
|
|
This is the behavior expected by DWARF. It also requires some fixups to
algorithms which were storing the addresses of some objects (Blocks and
Variables) relative to the beginning of the function.
There are plenty of things that still don't work in this setups, but
this change is sufficient for the expression evaluator to correctly
recognize the entry point of a function in this case.
|
|
Many calls to Function::GetAddressRange() were not interested in the
range itself. Instead they wanted to find the address of the function
(its entry point) or the base address for relocation of function-scoped
entities (technically, the two don't need to be the same, but there's
isn't good reason for them not to be). This PR creates a separate
function for retrieving this, and changes the existing
(non-controversial) uses to call that instead.
|
|
(#117996)"
This reverts commit 2526d5b1689389da9b194b5ec2878cfb2f4aca93, reapplying
ba14dac481564000339ba22ab867617590184f4c after fixing the conflict with
#117532. The change is that Function::GetAddressRanges now recomputes
the returned value instead of returning the member. This means it now
returns a value instead of a reference type.
|
|
This reverts commit ba14dac481564000339ba22ab867617590184f4c. I guess
"has no conflicts" doesn't mean "it will build".
|
|
This is a follow-up/reimplementation of #115730. While working on that
patch, I did not realize that the correct (discontinuous) set of ranges
is already stored in the block representing the whole function. The
catch -- ranges for this block are only set later, when parsing all of
the blocks of the function.
This patch changes that by populating the function block ranges eagerly
-- from within the Function constructor. This also necessitates a
corresponding change in all of the symbol files -- so that they stop
populating the ranges of that block. This allows us to avoid some
unnecessary work (not parsing the function DW_AT_ranges twice) and also
results in some simplification of the parsing code.
|
|
It's basically true already (except for a brief time during
construction). This patch makes sure the objects are constructed with a
valid parent and enforces this in the type system, which allows us to
get rid of some nullptr checks.
|
|
This is the beginning of a different, more fundamental approach to
handling. This PR tries to tries to minimize functional changes. It only
makes sure that we store the true set of ranges inside the function
object, so that subsequent patches can make use of it.
|
|
lldb has two RegisterLocation classes that do slightly different things.
UnwindPlan::Row::RegisterLocation (new: AbstractRegisterLocation) has a
description of how to find a register's value or location, not specific
to a particular stopping point. It may say that at a given offset into a
function, the caller's register has been spilled to stack memory at CFA
minus an offset. Or it may say that the caller's register is at a DWARF
exprssion.
UnwindLLDB::RegisterLocation (new: ConcreteRegisterLocation) is a
specific address where the register is currently stored, or the register
it has been copied into, or its value at this point in the current
function execution.
When lldb stops in a function, it interprets the
AbstractRegisterLocation's instructions using the register context and
stack memory, to create the ConcreteRegisterLocation at this point in
time for this stack frame.
I'm not thrilled with AbstractRegisterLocation and
ConcreteRegisterLocation, but it's better than the same name and it will
be easier to update them if someone suggests a better pair.
|
|
Updates:
- The previous patch changed the default behavior to not load dwos in
`DWARFUnit`
~~`SymbolFileDWARFDwo *GetDwoSymbolFile(bool load_all_debug_info =
false);`~~
`SymbolFileDWARFDwo *GetDwoSymbolFile(bool load_all_debug_info = true);`
- This broke some lldb-shell tests (see
https://green.lab.llvm.org/green/view/LLDB/job/as-lldb-cmake/16273/)
- TestDebugInfoSize.py
- with symbol on-demand, by default statistics dump only reports
skeleton debug info size
- `statistics dump -f` will load all dwos. debug info = skeleton debug
info + all dwo debug info
Currently running `statistics dump` will trigger lldb to load debug info
that's not yet loaded (eg. dwo files). Resulted in a delay in the
command return, which, can be interrupting.
This patch also added a new option `--load-all-debug-info` asking
statistics to dump all possible debug info, which will force loading all
debug info available if not yet loaded.
|
|
This reverts commit 21ddd7ff2b166c5e133b460b1a09ee8adb786ccd because it
breaks a bunch of tests:
https://lab.llvm.org/buildbot/#/builders/68/builds/69018
https://green.lab.llvm.org/green/view/LLDB/job/as-lldb-cmake/16273
|
|
Currently running `statistics dump` will trigger lldb to load debug info
that's not yet loaded (eg. dwo files). Resulted in a delay in the
command return, which, can be interrupting.
This patch also added a new option `--load-all-debug-info` asking
statistics to dump all possible debug info, which will force loading all
debug info available if not yet loaded.
|
|
Store a SupportFile, rather than a FileSpec, in CompileUnit. This commit
works towards having the SourceManager operate on SupportFiles so that
it can (1) validate the Checksum and (2) materialize the content of
inline source information.
|
|
LLVM supports DWARF 5 linetable extension to store source files inline
in DWARF. This is particularly useful for compiler-generated source
code. This implementation tries to materialize them as temporary files
lazily, so SBAPI clients don't need to be aware of them.
rdar://110926168
|
|
for types (#74786)
This patch revives the effort to get this Phabricator patch into
upstream:
https://reviews.llvm.org/D137900
This patch was accepted before in Phabricator but I found some
-gsimple-template-names issues that are fixed in this patch.
A fixed up version of the description from the original patch starts
now.
This patch started off trying to fix Module::FindFirstType() as it
sometimes didn't work. The issue was the SymbolFile plug-ins didn't do
any filtering of the matching types they produced, and they only looked
up types using the type basename. This means if you have two types with
the same basename, your type lookup can fail when only looking up a
single type. We would ask the Module::FindFirstType to lookup "Foo::Bar"
and it would ask the symbol file to find only 1 type matching the
basename "Bar", and then we would filter out any matches that didn't
match "Foo::Bar". So if the SymbolFile found "Foo::Bar" first, then it
would work, but if it found "Baz::Bar" first, it would return only that
type and it would be filtered out.
Discovering this issue lead me to think of the patch Alex Langford did a
few months ago that was done for finding functions, where he allowed
SymbolFile objects to make sure something fully matched before parsing
the debug information into an AST type and other LLDB types. So this
patch aimed to allow type lookups to also be much more efficient.
As LLDB has been developed over the years, we added more ways to to type
lookups. These functions have lots of arguments. This patch aims to make
one API that needs to be implemented that serves all previous lookups:
- Find a single type
- Find all types
- Find types in a namespace
This patch introduces a `TypeQuery` class that contains all of the state
needed to perform the lookup which is powerful enough to perform all of
the type searches that used to be in our API. It contain a vector of
CompilerContext objects that can fully or partially specify the lookup
that needs to take place.
If you just want to lookup all types with a matching basename,
regardless of the containing context, you can specify just a single
CompilerContext entry that has a name and a CompilerContextKind mask of
CompilerContextKind::AnyType.
Or you can fully specify the exact context to use when doing lookups
like: CompilerContextKind::Namespace "std"
CompilerContextKind::Class "foo"
CompilerContextKind::Typedef "size_type"
This change expands on the clang modules code that already used a
vector<CompilerContext> items, but it modifies it to work with
expression type lookups which have contexts, or user lookups where users
query for types. The clang modules type lookup is still an option that
can be enabled on the `TypeQuery` objects.
This mirrors the most recent addition of type lookups that took a
vector<CompilerContext> that allowed lookups to happen for the
expression parser in certain places.
Prior to this we had the following APIs in Module:
```
void
Module::FindTypes(ConstString type_name, bool exact_match, size_t max_matches,
llvm::DenseSet<lldb_private::SymbolFile *> &searched_symbol_files,
TypeList &types);
void
Module::FindTypes(llvm::ArrayRef<CompilerContext> pattern, LanguageSet languages,
llvm::DenseSet<lldb_private::SymbolFile *> &searched_symbol_files,
TypeMap &types);
void Module::FindTypesInNamespace(ConstString type_name,
const CompilerDeclContext &parent_decl_ctx,
size_t max_matches, TypeList &type_list);
```
The new Module API is much simpler. It gets rid of all three above
functions and replaces them with:
```
void FindTypes(const TypeQuery &query, TypeResults &results);
```
The `TypeQuery` class contains all of the needed settings:
- The vector<CompilerContext> that allow efficient lookups in the symbol
file classes since they can look at basename matches only realize fully
matching types. Before this any basename that matched was fully realized
only to be removed later by code outside of the SymbolFile layer which
could cause many types to be realized when they didn't need to.
- If the lookup is exact or not. If not exact, then the compiler context
must match the bottom most items that match the compiler context,
otherwise it must match exactly
- If the compiler context match is for clang modules or not. Clang
modules matches include a Module compiler context kind that allows types
to be matched only from certain modules and these matches are not needed
when d oing user type lookups.
- An optional list of languages to use to limit the search to only
certain languages
The `TypeResults` object contains all state required to do the lookup
and store the results:
- The max number of matches
- The set of SymbolFile objects that have already been searched
- The matching type list for any matches that are found
The benefits of this approach are:
- Simpler API, and only one API to implement in SymbolFile classes
- Replaces the FindTypesInNamespace that used a CompilerDeclContext as a
way to limit the search, but this only worked if the TypeSystem matched
the current symbol file's type system, so you couldn't use it to lookup
a type in another module
- Fixes a serious bug in our FindFirstType functions where if we were
searching for "foo::bar", and we found a "baz::bar" first, the basename
would match and we would only fetch 1 type using the basename, only to
drop it from the matching list and returning no results
|
|
We have a handful of places in LLDB where we try to outsmart the logic
in Mangled to determine whether a string is mangled or not. There's at
least one place (*) where we are getting this wrong and causes a subtle
bug. The `cstring_is_mangled` is cheap enough that we should always rely
on it to determine whether a string is mangled or not.
(*) `ObjectFileMachO` assumes that a symbol that starts with a double
underscore (such as `__pthread_kill`) is mangled. That's mostly
harmless, until you use `function.name-without-args` in the frame
format. The formatter calls `Symbol::GetNameNoArguments()` which is a
wrapper around `Mangled::GetName(ePreferDemangledWithoutArguments)`. The
latter will first try using the appropriate language plugin to get the
demangled name without arguments, and if that fails, falls back to
returning the demangled name. Because we forced Mangled to treat the
symbol as a mangled name (even though it's not) there's no demangled
name. The result is that frames don't show any symbol at all.
Differential revision: https://reviews.llvm.org/D148846
|
|
This patch replaces (llvm::|)Optional< with std::optional<. I'll post
a separate patch to clean up the "using" declarations, #include
"llvm/ADT/Optional.h", etc.
This is part of an effort to migrate from llvm::Optional to
std::optional:
https://discourse.llvm.org/t/deprecating-llvm-optional-x-hasvalue-getvalue-getvalueor/63716
|
|
This patch adds #include <optional> to those files containing
llvm::Optional<...> or Optional<...>.
I'll post a separate patch to actually replace llvm::Optional with
std::optional.
This is part of an effort to migrate from llvm::Optional to
std::optional:
https://discourse.llvm.org/t/deprecating-llvm-optional-x-hasvalue-getvalue-getvalueor/63716
|
|
This patch mechanically replaces None with std::nullopt where the
compiler would warn if None were deprecated. The intent is to reduce
the amount of manual work required in migrating from Optional to
std::optional.
This is part of an effort to migrate from llvm::Optional to
std::optional:
https://discourse.llvm.org/t/deprecating-llvm-optional-x-hasvalue-getvalue-getvalueor/63716
|
|
I went over the output of the following mess of a command:
(ulimit -m 2000000; ulimit -v 2000000; git ls-files -z | parallel
--xargs -0 cat | aspell list --mode=none --ignore-case | grep -E
'^[A-Za-z][a-z]*$' | sort | uniq -c | sort -n | grep -vE '.{25}' |
aspell pipe -W3 | grep : | cut -d' ' -f2 | less)
and proceeded to spend a few days looking at it to find probable typos
and fixed a few hundred of them in all of the llvm project (note, the
ones I found are not anywhere near all of them, but it seems like a
good start).
Differential revision: https://reviews.llvm.org/D131122
|
|
This reverts commit 967df65a3610f98a3bc0ec0f2303641d7bad176c.
This fixes test/Shell/SymbolFile/NativePDB/find-functions.cpp. When
looking up functions with the PDB plugins, if we are looking for a
full function name, we should use `GetName` to populate the `name`
field instead of `GetLookupName` since `GetName` has the more
complete information.
|
|
This reverts commit befa77e59a7760d8c4fdd177b234e4a59500f61c.
Looks like this broke a SymbolFileNativePDB test. I'll investigate and
resubmit with a fix soon.
|
|
Context:
When setting a breakpoint by name, we invoke Module::FindFunctions to
find the function(s) in question. However, we use a Module::LookupInfo
to first process the user-provided name and figure out exactly what
we're looking for. When we actually perform the function lookup, we
search for the basename. After performing the search, we then filter out
the results using Module::LookupInfo::Prune. For example, given
a::b::foo we would first search for all instances of foo and then filter
out the results to just names that have a::b::foo in them. As one can
imagine, this involves a lot of debug info processing that we do not
necessarily need to be doing. Instead of doing one large post-processing
step after finding each instance of `foo`, we can filter them as we go
to save time.
Some numbers:
Debugging LLDB and placing a breakpoint on
llvm::itanium_demangle::StringView::begin without this change takes
approximately 70 seconds and resolves 31,920 DIEs. With this change,
placing the breakpoint takes around 30 seconds and resolves 8 DIEs.
Differential Revision: https://reviews.llvm.org/D129682
|
|
This patch replaces x.hasValue() with x where x is contextually
convertible to bool.
|
|
This reverts commit aa8feeefd3ac6c78ee8f67bf033976fc7d68bc6d.
|
|
|
|
|
|
|
|
|
|
|
|
Most of our code was including Log.h even though that is not where the
"lldb" log channel is defined (Log.h defines the generic logging
infrastructure). This worked because Log.h included Logging.h, even
though it should.
After the recent refactor, it became impossible the two files include
each other in this direction (the opposite inclusion is needed), so this
patch removes the workaround that was put in place and cleans up all
files to include the right thing. It also renames the file to LLDBLog to
better reflect its purpose.
|
|
|
|
Symbol table parsing has evolved over the years and many plug-ins contained duplicate code in the ObjectFile::GetSymtab() that used to be pure virtual. With this change, the "Symbtab *ObjectFile::GetSymtab()" is no longer virtual and will end up calling a new "void ObjectFile::ParseSymtab(Symtab &symtab)" pure virtual function to actually do the parsing. This helps centralize the code for parsing the symbol table and allows the ObjectFile base class to do all of the common work, like taking the necessary locks and creating the symbol table object itself. Plug-ins now just need to parse when they are asked to parse as the ParseSymtab function will only get called once.
This is a retry of the original patch https://reviews.llvm.org/D113965 which was reverted. There was a deadlock in the Manual DWARF indexing code during symbol preloading where the module was asked on the main thread to preload its symbols, and this would in turn cause the DWARF manual indexing to use a thread pool to index all of the compile units, and if there were relocations on the debug information sections, these threads could ask the ObjectFile to load section contents, which could cause a call to ObjectFileELF::RelocateSection() which would ask for the symbol table from the module and it would deadlock. We can't lock the module in ObjectFile::GetSymtab(), so the solution I am using is to use a llvm::once_flag to create the symbol table object once and then lock the Symtab object. Since all APIs on the symbol table use this lock, this will prevent anyone from using the symbol table before it is parsed and finalized and will avoid the deadlock I mentioned. ObjectFileELF::GetSymtab() was never locking the module lock before and would put off creating the symbol table until somewhere inside ObjectFileELF::GetSymtab(). Now we create it one time inside of the ObjectFile::GetSymtab() and immediately lock it which should be safe enough. This avoids the deadlocks and still provides safety.
Differential Revision: https://reviews.llvm.org/D114288
|
|
This reverts commit 951b107eedab1829f18049443f03339dbb0db165.
Buildbots were failing, there is a deadlock in /Users/gclayton/Documents/src/llvm/clean/llvm-project/lldb/test/Shell/SymbolFile/DWARF/DW_AT_range-DW_FORM_sec_offset.s when ELF files try to relocate things.
|
|
Symbol table parsing has evolved over the years and many plug-ins contained duplicate code in the ObjectFile::GetSymtab() that used to be pure virtual. With this change, the "Symbtab *ObjectFile::GetSymtab()" is no longer virtual and will end up calling a new "void ObjectFile::ParseSymtab(Symtab &symtab)" pure virtual function to actually do the parsing. This helps centralize the code for parsing the symbol table and allows the ObjectFile base class to do all of the common work, like taking the necessary locks and creating the symbol table object itself. Plug-ins now just need to parse when they are asked to parse as the ParseSymtab function will only get called once.
Differential Revision: https://reviews.llvm.org/D113965
|
|
breakpad.
Teach LLDB to understand INLINE and INLINE_ORIGIN records in breakpad.
They have the following formats:
```
INLINE inline_nest_level call_site_line call_site_file_num origin_num [address size]+
INLINE_ORIGIN origin_num name
```
`INLNIE_ORIGIN` is simply a string pool for INLINE so that we won't have
duplicated names for inlined functions and can show up anywhere in the symbol
file.
`INLINE` follows immediately after `FUNC` represents the ranges of momery
address that has functions inlined inside the function.
Differential Revision: https://reviews.llvm.org/D113330
|
|
Since every FUNC record (in breakpad) is a compilation unit, creating the
function for the CU allows `ResolveSymbolContext` to resolve
`eSymbolContextFunction`.
Differential Revision: https://reviews.llvm.org/D113163
|
|
SymbolFile plugin names
|
|
The new key/value pairs that are added to each module's stats are:
"debugInfoByteSize": The size in bytes of debug info for each module.
"debugInfoIndexTime": The time in seconds that it took to index the debug info.
"debugInfoParseTime": The time in seconds that debug info had to be parsed.
At the top level we add up all of the debug info size, parse time and index time with the following keys:
"totalDebugInfoByteSize": The size in bytes of all debug info in all modules.
"totalDebugInfoIndexTime": The time in seconds that it took to index all debug info if it was indexed for all modules.
"totalDebugInfoParseTime": The time in seconds that debug info was parsed for all modules.
Differential Revision: https://reviews.llvm.org/D112501
|
|
This patch refactors a good part of the code base turning the usual
FileSpec, Line, Column, CheckInlines, ExactMatch arguments into a
SourceLocationSpec object.
This change is required for a following patch that will add handling of the
column line information when doing symbol resolution.
Differential Revision: https://reviews.llvm.org/D100965
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
|
|
internal ordering of DenseMap
`image dump symtab` seems to output the symbols in whatever order they appear in
the DenseMap that is used to filter out symbols with non-unique addresses. As
DenseMap is a hash map this order can change at any time so the output of this
command is pretty unstable. This also causes the `Breakpad/symtab.test` to fail
with enabled reverse iteration (which reverses the DenseMap order to find issues
like this).
This patch makes the DenseMap a std::vector and uses a separate DenseSet to do
the address filtering. The output order is now dependent on the order in which
the symbols are read (which should be deterministic). It might also avoid a bit
of work as all the work for creating the Symbol constructor parameters is only
done when we can actually emplace a new Symbol.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D87036
|
|
In breakpad, only x86 (and mips) registers have a leading '$' in their
names. Arm architectures use plain register names.
Previously, lldb was assuming all registers have a '$'. Fix the code to
match the (unfortunately, inconsistent) reality.
|
|
pointers
Summary:
All of our lookup APIs either use `CompilerDeclContext &` or `CompilerDeclContext *` semi-randomly it seems.
This leads to us constantly converting between those two types (and doing nullptr checks when going from
pointer to reference). It also leads to the confusing situation where we have two possible ways to express
that we don't have a CompilerDeclContex: either a nullptr or an invalid CompilerDeclContext (aka a default
constructed CompilerDeclContext).
This moves all APIs to use references and gets rid of all the nullptr checks and conversions.
Reviewers: labath, mib, shafik
Reviewed By: labath, shafik
Subscribers: shafik, arphaman, abidh, JDevlieghere, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D74607
|
|
Rename LLDB_PLUGIN to LLDB_PLUGIN_DEFINE as Pavel suggested in D73067 to
avoid name conflict.
|
|
|
|
This is a step towards making the initialize and terminate calls be
generated by CMake, which in turn is towards making it possible to
disable plugins at configuration time.
Differential revision: https://reviews.llvm.org/D74245
|
|
Summary:
A *.cpp file header in LLDB (and in LLDB) should like this:
```
//===-- TestUtilities.cpp -------------------------------------------------===//
```
However in LLDB most of our source files have arbitrary changes to this format and
these changes are spreading through LLDB as folks usually just use the existing
source files as templates for their new files (most notably the unnecessary
editor language indicator `-*- C++ -*-` is spreading and in every review
someone is pointing out that this is wrong, resulting in people pointing out that this
is done in the same way in other files).
This patch removes most of these inconsistencies including the editor language indicators,
all the different missing/additional '-' characters, files that center the file name, missing
trailing `===//` (mostly caused by clang-format breaking the line).
Reviewers: aprantl, espindola, jfb, shafik, JDevlieghere
Reviewed By: JDevlieghere
Subscribers: dexonsmith, wuzish, emaste, sdardis, nemanjai, kbarton, MaskRay, atanasyan, arphaman, jfb, abidh, jsji, JDevlieghere, usaxena95, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D73258
|
|
The old construction method can be quadratic for some inputs. This
approach guarantees a reasonable performance.
|
