| Age | Commit message (Collapse) | Author |
|---|
|
This fixes issues found in e066f35c6981c720e3a7e5883efc40c861b3b7, which
was later reverted. The problem was with "k" message which was sent with
sync_on_timeout flag set to true, so lldb was waiting for response,
which is currently not being sent by lldb-server. Not waiting for
response at all seems to be not a solution, because on MAC OS X lldb
waits for response from "k" to gracefully kill inferior.
|
|
Move ReadPacketWithOutputSupport() from GDBRemoteCommunication
to GDBRemoteClientBase. This function is client-specific and moving
it there simplifies followup patches that split communication into
separate thread.
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.llvm.org/D135028
|
|
Move the broadcasting support from GDBRemoteCommunication
to GDBRemoteClientBase since this is where it is actually used. Remove
GDBRemoteCommunication and subclass constructor arguments left over
after Communication cleanup.
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.llvm.org/D133427
|
|
This reverts commit 446b61cff4ea0cb7e7fcc5e0fec7bc749d379b08. Of course
it does not work on Windows.
|
|
Refactor the mechanism for sending interrupt packets to send them
from async thread (i.e. the same thread that sends the continue packet
preceding them and that waits for the response), rather than from
the thread requesting the interrupt. This is going to become especially
important when using the vCtrlC packet as part of the non-stop protocol,
as -- unlike the simple ^c sent in the all-stop mode -- this packet
involves an explicit reply.
Suggested by Pavel Labath in D126614.
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.llvm.org/D131075
|
|
It was originally only in "gdb-remote process" but it is convenient to
also have it come as part of gdb-remote packets.
|
|
|
|
We added some support for this mode back in 2015, but the feature was
never productionized. It is completely untested, and there are known
major structural lldb issues that need to be resolved before this
feature can really be supported.
It also complicates making further changes to stop reply packet
handling, which is what I am about to do.
Differential Revision: https://reviews.llvm.org/D110553
|
|
This reverts commit 82a38837150099288a1262391ef43e1fd69ffde4.
The original version had a copy-paste error: using the Interrupt timeout
for the ResumeSynchronous wait, which is clearly wrong. This error would
have been evident with real use, but the interrupt is long enough that it
only caused one testsuite failure (in the Swift fork).
Anyway, I found that mistake and fixed it and checked all the other places
where I had to plumb through a timeout, and added a test with a short
interrupt timeout stepping over a function that takes 3x the interrupt timeout
to complete, so that should detect a similar mistake in the future.
|
|
This reverts commit bd5751f3d249ec0798060bd98c07272174c52af0.
This patch series is causing us to every so often miss switching
the state from eStateRunning to eStateStopped when we get the stop
packet from the debug server.
Reverting till I can figure out how that could be happening.
|
|
Differential Revision: https://reviews.llvm.org/D102562
|
|
ProcessGDBRemote plugin layers.
Also fix a bug where if we tried to interrupt, but the ReadPacket
wakeup timer woke us up just after the timeout, we would break out
the switch, but then since we immediately check if the response is
empty & fail if it is, we could end up actually only giving a
small interval to the interrupt.
Differential Revision: https://reviews.llvm.org/D102085
|
|
This is how it should've been and brings it more in line with
std::string_view. There should be no functional change here.
This is mostly mechanical from a custom clang-tidy check, with a lot of
manual fixups. It uncovers a lot of minor inefficiencies.
This doesn't actually modify StringRef yet, I'll do that in a follow-up.
|
|
Summary:
A *.cpp file header in LLDB (and in LLDB) should like this:
```
//===-- TestUtilities.cpp -------------------------------------------------===//
```
However in LLDB most of our source files have arbitrary changes to this format and
these changes are spreading through LLDB as folks usually just use the existing
source files as templates for their new files (most notably the unnecessary
editor language indicator `-*- C++ -*-` is spreading and in every review
someone is pointing out that this is wrong, resulting in people pointing out that this
is done in the same way in other files).
This patch removes most of these inconsistencies including the editor language indicators,
all the different missing/additional '-' characters, files that center the file name, missing
trailing `===//` (mostly caused by clang-format breaking the line).
Reviewers: aprantl, espindola, jfb, shafik, JDevlieghere
Reviewed By: JDevlieghere
Subscribers: dexonsmith, wuzish, emaste, sdardis, nemanjai, kbarton, MaskRay, atanasyan, arphaman, jfb, abidh, jsji, JDevlieghere, usaxena95, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D73258
|
|
This patch removes the two variant of StringExtractor::GetStringRef that
return (non-)const references to std::string. The non-const one was
being abused to reinitialize the StringExtractor and its uses are
replaced by calls to the copy asignment operator. The const variant was
refactored to return an actual llvm::StringRef.
llvm-svn: 369493
|
|
This patch replaces explicit calls to log::Printf with the new LLDB_LOGF
macro. The macro is similar to LLDB_LOG but supports printf-style format
strings, instead of formatv-style format strings.
So instead of writing:
if (log)
log->Printf("%s\n", str);
You'd write:
LLDB_LOG(log, "%s\n", str);
This change was done mechanically with the command below. I replaced the
spurious if-checks with vim, since I know how to do multi-line
replacements with it.
find . -type f -name '*.cpp' -exec \
sed -i '' -E 's/log->Printf\(/LLDB_LOGF\(log, /g' "{}" +
Differential revision: https://reviews.llvm.org/D65128
llvm-svn: 366936
|
|
Summary:
NFC = [[ https://llvm.org/docs/Lexicon.html#nfc | Non functional change ]]
This commit is the result of modernizing the LLDB codebase by using
`nullptr` instread of `0` or `NULL`. See
https://clang.llvm.org/extra/clang-tidy/checks/modernize-use-nullptr.html
for more information.
This is the command I ran and I to fix and format the code base:
```
run-clang-tidy.py \
-header-filter='.*' \
-checks='-*,modernize-use-nullptr' \
-fix ~/dev/llvm-project/lldb/.* \
-format \
-style LLVM \
-p ~/llvm-builds/debug-ninja-gcc
```
NOTE: There were also changes to `llvm/utils/unittest` but I did not
include them because I felt that maybe this library shall be updated in
isolation somehow.
NOTE: I know this is a rather large commit but it is a nobrainer in most
parts.
Reviewers: martong, espindola, shafik, #lldb, JDevlieghere
Reviewed By: JDevlieghere
Subscribers: arsenm, jvesely, nhaehnle, hiraditya, JDevlieghere, teemperor, rnkovacs, emaste, kubamracek, nemanjai, ki.stfu, javed.absar, arichardson, kbarton, jrtc27, MaskRay, atanasyan, dexonsmith, arphaman, jfb, jsji, jdoerfert, lldb-commits, llvm-commits
Tags: #lldb, #llvm
Differential Revision: https://reviews.llvm.org/D61847
llvm-svn: 361484
|
|
Reduce the inclusion of Target/Process.h to help isolate why Process is being
preserved during the build of `lldb-server`.
llvm-svn: 359811
|
|
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
|
|
This patch simplifies boolean expressions acorss LLDB. It was generated
using clang-tidy with the following command:
run-clang-tidy.py -checks='-*,readability-simplify-boolean-expr' -format -fix $PWD
Differential revision: https://reviews.llvm.org/D55584
llvm-svn: 349215
|
|
This is intended as a clean up after the big clang-format commit
(r280751), which unfortunately resulted in many of the comment
paragraphs in LLDB being very hard to read.
FYI, the script I used was:
import textwrap
import commands
import os
import sys
import re
tmp = "%s.tmp"%sys.argv[1]
out = open(tmp, "w+")
with open(sys.argv[1], "r") as f:
header = ""
text = ""
comment = re.compile(r'^( *//) ([^ ].*)$')
special = re.compile(r'^((([A-Z]+[: ])|([0-9]+ )).*)|(.*;)$')
for line in f:
match = comment.match(line)
if match and not special.match(match.group(2)):
# skip intentionally short comments.
if not text and len(match.group(2)) < 40:
out.write(line)
continue
if text:
text += " " + match.group(2)
else:
header = match.group(1)
text = match.group(2)
continue
if text:
filled = textwrap.wrap(text, width=(78-len(header)),
break_long_words=False)
for l in filled:
out.write(header+" "+l+'\n')
text = ""
out.write(line)
os.rename(tmp, sys.argv[1])
Differential Revision: https://reviews.llvm.org/D46144
llvm-svn: 331197
|
|
Summary:
Gdb servers like openocd may send many $O reply packets for the client to output during a qRcmd command sequence. Currently, lldb interprets the first O packet as an unexpected response. Besides generating no output, this causes lldb to get out of sync with future commands because it continues reading O packets from the first command as response to subsequent commands.
This patch handles any O packets during an qRcmd, treating the first non-O packet as the true response.
Preliminary discussion at http://lists.llvm.org/pipermail/lldb-dev/2018-January/013078.html
Reviewers: clayborg
Reviewed By: clayborg
Subscribers: labath, lldb-commits
Differential Revision: https://reviews.llvm.org/D41745
Patch by Owen Shaw <llvm@owenpshaw.net>
llvm-svn: 322190
|
|
llvm-svn: 321120
|
|
Summary:
This replaces the usage of raw integers with duration classes in the gdb-remote
packet management functions. The values are still converted back to integers once
they go into the generic Communication class -- that I am leaving to a separate
change.
The changes are mostly straight-forward (*), the only tricky part was
representation of infinite timeouts.
Currently, we use UINT32_MAX to denote infinite timeout. This is not well suited
for duration classes, as they tend to do arithmetic on the values, and the
identity of the MAX value can easily get lost (e.g.
microseconds(seconds(UINT32_MAX)).count() != UINT32_MAX). We cannot use zero to
represent infinity (as Listener classes do) because we already use it to do
non-blocking polling reads. For this reason, I chose to have an explicit value
for infinity.
The way I achieved that is via llvm::Optional, and I think it reads quite
natural. Passing llvm::None as "timeout" means "no timeout", while passing zero
means "poll". The only tricky part is this breaks implicit conversions (seconds
are implicitly convertible to microseconds, but Optional<seconds> cannot be
easily converted into Optional<microseconds>). For this reason I added a special
class Timeout, inheriting from Optional, and enabling the necessary conversions
one would normally expect.
(*) The other tricky part was GDBRemoteCommunication::PopPacketFromQueue, which
was needlessly complicated. I've simplified it, but that one is only used in
non-stop mode, and so is untested.
Reviewers: clayborg, zturner, jingham
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D26971
llvm-svn: 287864
|
|
Summary:
Most of the changes are very straight-forward, the only tricky part was the
"packet speed-test" function, which is very time-heavy. As the function was
completely untested, I added a quick unit smoke test for it.
Reviewers: clayborg, zturner
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D25391
llvm-svn: 285602
|
|
This change does the following:
* Changes the signature for the continuation delegate method that handles
async structured data from accepting an already-parsed structured data
element to taking just the packet contents.
* Moves the conversion of the JSON-async: packet contents from
GDBRemoteClientBase to the continuation delegate method.
* Adds a new unit test for verifying that the $JSON-asyc: packets get
decoded and that the decoded packets get forwarded on to the delegate
for further processing. Thanks to Pavel for making that whole section of
code easily unit testable!
* Tightens up the packet verification on reception of a $JSON-async:
packet contents. The code prior to this change is susceptible to a
segfault if a packet is carefully crafted that starts with $J but
has a total length shorter than the length of "$JSON-async:".
Reviewers: labath, clayborg, zturner
Differential Revision: https://reviews.llvm.org/D23884
llvm-svn: 281121
|
|
*** to conform to clang-format’s LLVM style. This kind of mass change has
*** two obvious implications:
Firstly, merging this particular commit into a downstream fork may be a huge
effort. Alternatively, it may be worth merging all changes up to this commit,
performing the same reformatting operation locally, and then discarding the
merge for this particular commit. The commands used to accomplish this
reformatting were as follows (with current working directory as the root of
the repository):
find . \( -iname "*.c" -or -iname "*.cpp" -or -iname "*.h" -or -iname "*.mm" \) -exec clang-format -i {} +
find . -iname "*.py" -exec autopep8 --in-place --aggressive --aggressive {} + ;
The version of clang-format used was 3.9.0, and autopep8 was 1.2.4.
Secondly, “blame” style tools will generally point to this commit instead of
a meaningful prior commit. There are alternatives available that will attempt
to look through this change and find the appropriate prior commit. YMMV.
llvm-svn: 280751
|
|
This reverts commit r279725 as it breaks "dynamic register size" feature of mips.
llvm-svn: 280088
|
|
This started as an effort to change StringExtractor to store a
StringRef internally instead of a std::string. I got that working
locally with just 1 test failure which I was unable to figure out the
cause of. But it was also a massive changelist due to a trickle
down effect of changes.
So I'm starting over, using what I learned from the first time to
tackle smaller, more isolated changes hopefully leading up to
a full conversion by the end.
At first the changes (such as in this CL) will seem mostly
a matter of preference and pointless otherwise. However, there
are some places in my larger CL where using StringRef turned 20+
lines of code into 2, drastically simplifying logic. Hopefully
once these go in they will illustrate some of the benefits of
thinking in terms of StringRef.
llvm-svn: 279917
|
|
Summary:
This is a preparatory commit for D22914, where I'd like to replace this mutex by an R/W lock
(which is also not recursive). This required a couple of changes:
- The only caller of Read/WriteRegister, GDBRemoteRegisterContext class, was already acquiring
the mutex, so these functions do not need to. All functions which now do not take a lock, take
an lock argument instead, to remind the caller of this fact.
- GetThreadSuffixSupported() was being called from locked and unlocked contexts (including
contexts where the process was running, and the call would fail if it did not have the result
cached). I have split this into two functions, one which computes the thread suffix support and
caches it (this one always takes the lock), and another, which returns the cached value (and
never needs to take the lock). This feels quite natural as ProcessGdbRemote was already
pre-caching this value at the start.
Reviewers: clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D23802
llvm-svn: 279725
|
|
Take 2, with missing cmake line fixed. Build tested on
Ubuntu 14.04 with clang-3.6.
See docs/structured_data/StructuredDataPlugins.md for details.
differential review: https://reviews.llvm.org/D22976
reviewers: clayborg, jingham
llvm-svn: 279202
|
|
This reverts commit 1d885845d1451e7b232f53fba2e36be67aadabd8.
llvm-svn: 279200
|
|
See docs/structured_data/StructuredDataPlugins.md for details.
differential review: https://reviews.llvm.org/D22976
reviewers: clayborg, jingham
llvm-svn: 279198
|
|
Resumbitting the commit after fixing the following problems:
- broken unit tests on windows: incorrect gtest usage on my part (TEST vs. TEST_F)
- the new code did not correctly handle the case where we went to interrupt the process, but it
stopped due to a different reason - the interrupt request would remain queued and would
interfere with the following "continue". I also added a unit test for this case.
This reapplies r277156 and r277139.
llvm-svn: 278118
|
|
This reverts commit r277139, because:
- broken unittest on windows (likely typo on my part)
- seems to break TestCallThatRestart (needs investigation)
llvm-svn: 277154
|
|
SendContinuePacketAndWaitForResponse was huge function with very complex interactions with
several other functions (SendAsyncSignal, SendInterrupt, SendPacket). This meant that making any
changes to how packet sending functions and threads interact was very difficult and error-prone.
This change does not add any functionality yet, it merely paves the way for future changes. In a
follow-up, I plan to add the ability to have multiple query packets in flight (i.e.,
request,request,response,response instead of the usual request,response sequences) and use that
to speed up qModuleInfo packet processing.
Here, I introduce two special kinds of locks: ContinueLock, which is used by the continue thread,
and Lock, which is used by everyone else. ContinueLock (atomically) sends a continue packet, and
blocks any other async threads from accessing the connection. Other threads create an instance of
the Lock object when they want to access the connection. This object, while in scope prevents the
continue from being send. Optionally, it can also interrupt the process to gain access to the
connection for async processing.
Most of the syncrhonization logic is encapsulated within these two classes. Some of it still
had to bleed over into the SendContinuePacketAndWaitForResponse, but the function is still much
more manageable than before -- partly because of most of the work is done in the ContinueLock
class, and partly because I have factored out a lot of the packet processing code separate
functions (this also makes the functionality more easily testable). Most importantly, there is
none of syncrhonization code in the async thread users -- as far as they are concerned, they just
need to declare a Lock object, and they are good to go (SendPacketAndWaitForResponse is now a
very thin wrapper around the NoLock version of the function, whereas previously it had over 100
lines of synchronization code). This will make my follow up changes there easy.
I have written a number of unit tests for the new code and I have ran the test suite on linux and
osx with no regressions.
Subscribers: tberghammer
Differential Revision: https://reviews.llvm.org/D22629
llvm-svn: 277139
|
