| Age | Commit message (Collapse) | Author |
|---|
|
for expression evaluation (#161688)
Depends on:
* https://github.com/llvm/llvm-project/pull/162050
Since it's a 'Note' diagnostic it would only show up when expression
evaluation actually failed. This helps with expression evaluation
failure reports in mixed language environments where it's not quite
clear what language the expression ran as. It may also reduce confusion
around why the expression evaluator ran an expression in a language it
wasn't asked to run (a softer alternative to what I attempted in
https://github.com/llvm/llvm-project/pull/156648).
Here are some example outputs:
```
# Without target
(lldb) expr blah
note: Falling back to default language. Ran expression as 'Objective C++'.
# Stopped in target
(lldb) expr blah
note: Ran expression as 'C++14'.
(lldb) expr -l objc -- blah
note: Expression evaluation in pure Objective-C not supported. Ran expression as 'Objective C++'.
(lldb) expr -l c -- blah
note: Expression evaluation in pure C not supported. Ran expression as 'ISO C++'.
(lldb) expr -l c++14 -- blah
note: Ran expression as 'C++14'
(lldb) expr -l c++20 -- blah
note: Ran expression as 'C++20'
(lldb) expr -l objective-c++ -- blah
note: Ran expression as 'Objective C++'
(lldb) expr -l D -- blah
note: Expression evaluation in D not supported. Falling back to default language. Ran expression as 'Objective C++'.
```
I didn't put the diagnostic on the same line as the inline diagnostic
for now because of implementation convenience, but if reviewers deem
that a blocker I can take a stab at that again.
Also, other language plugins (namely Swift), won't immediately benefit
from this and will have to emit their own diagnistc. I played around
with having a virtual API on `UserExpression` or `ExpressionParser` that
will be called consistently, but by the time we're about to parse the
expression we are already several frames deep into the plugin. Before
(and at the beginning of) the generic `UserExpression::Parse` call we
don't have enough information to notify which language we're going to
parse in (at least for the C++ plugin).
rdar://160297649
rdar://159669244
|
|
We have 3 different enums all expressing severity (info, warning,
error). Remove all uses with a new Severity enum in lldb-enumerations.h.
|
|
StreamFile subclasses Stream (from lldbUtility) and is backed by a File
(from lldbHost). It does not depend on anything from lldbCore or any of its
sibling libraries, so I think it makes sense for this to live in
lldbHost instead.
Differential Revision: https://reviews.llvm.org/D157460
|
|
This simple diff declares some enum values needed to create a REPL for the mojo language.
Differential Revision: https://reviews.llvm.org/D150303
|
|
We generally prohibit this at a higher level - for instance requiring
the process to be stopped for "expr". But when we trigger an expression
for internal purposes (e.g. to fetch types from the ObjC runtime) we weren't
checking the process state. Now we explicitly check this at the very start
of the job so we don't get into bad states.
Differential Revision: https://reviews.llvm.org/D137684
|
|
caching of resolved/absolute.
Resubmission of https://reviews.llvm.org/D130309 with the 2 patches that fixed the linux buildbot, and new windows fixes.
The FileSpec APIs allow users to modify instance variables directly by getting a non const reference to the directory and filename instance variables. This makes it impossible to control all of the times the FileSpec object is modified so we can clear cached member variables like m_resolved and with an upcoming patch caching if the file is relative or absolute. This patch modifies the APIs of FileSpec so no one can modify the directory or filename instance variables directly by adding set accessors and by removing the get accessors that are non const.
Many clients were using FileSpec::GetCString(...) which returned a unique C string from a ConstString'ified version of the result of GetPath() which returned a std::string. This caused many locations to use this convenient function incorrectly and could cause many strings to be added to the constant string pool that didn't need to. Most clients were converted to using FileSpec::GetPath().c_str() when possible. Other clients were modified to use the newly renamed version of this function which returns an actualy ConstString:
ConstString FileSpec::GetPathAsConstString(bool denormalize = true) const;
This avoids the issue where people were getting an already uniqued "const char *" that came from a ConstString only to put the "const char *" back into a "ConstString" object. By returning the ConstString instead of a "const char *" clients can be more efficient with the result.
The patch:
- Removes the non const GetDirectory() and GetFilename() get accessors
- Adds set accessors to replace the above functions: SetDirectory() and SetFilename().
- Adds ClearDirectory() and ClearFilename() to replace usage of the FileSpec::GetDirectory().Clear()/FileSpec::GetFilename().Clear() call sites
- Fixed all incorrect usage of FileSpec::GetCString() to use FileSpec::GetPath().c_str() where appropriate, and updated other call sites that wanted a ConstString to use the newly returned ConstString appropriately and efficiently.
Differential Revision: https://reviews.llvm.org/D130549
|
|
adding caching of resolved/absolute." and follow-ups
This reverts commit 9429b67b8e300e638d7828bbcb95585f85c4df4d.
It broke the build on Windows, see comments on https://reviews.llvm.org/D130309
It also reverts these follow-ups:
Revert "Fix buildbot breakage after https://reviews.llvm.org/D130309."
This reverts commit f959d815f4637890ebbacca379f1c38ab47e4e14.
Revert "Fix buildbot breakage after https://reviews.llvm.org/D130309."
This reverts commit 0bbce7a4c2d2bff622bdadd4323f93f5d90e6d24.
Revert "Cache the value for absolute path in FileSpec."
This reverts commit dabe877248b85b34878e75d5510339325ee087d0.
|
|
caching of resolved/absolute.
The FileSpect APIs allow users to modify instance variables directly by getting a non const reference to the directory and filename instance variables. This makes it impossibly to control all of the times the FileSpec object is modified so we can clear the cache. This patch modifies the APIs of FileSpec so no one can modify the directory or filename directly by adding set accessors and by removing the get accessors that are non const.
Many clients were using FileSpec::GetCString(...) which returned a unique C string from a ConstString'ified version of the result of GetPath() which returned a std::string. This caused many locations to use this convenient function incorrectly and could cause many strings to be added to the constant string pool that didn't need to. Most clients were converted to using FileSpec::GetPath().c_str() when possible. Other clients were modified to use the newly renamed version of this function which returns an actualy ConstString:
ConstString FileSpec::GetPathAsConstString(bool denormalize = true) const;
This avoids the issue where people were getting an already uniqued "const char *" that came from a ConstString only to put the "const char *" back into a "ConstString" object. By returning the ConstString instead of a "const char *" clients can be more efficient with the result.
The patch:
- Removes the non const GetDirectory() and GetFilename() get accessors
- Adds set accessors to replace the above functions: SetDirectory() and SetFilename().
- Adds ClearDirectory() and ClearFilename() to replace usage of the FileSpec::GetDirectory().Clear()/FileSpec::GetFilename().Clear() call sites
- Fixed all incorrect usage of FileSpec::GetCString() to use FileSpec::GetPath().c_str() where appropriate, and updated other call sites that wanted a ConstString to use the newly returned ConstString appropriately and efficiently.
Differential Revision: https://reviews.llvm.org/D130309
|
|
Modify OpenOptions enum to open the future path into synchronizing
vFile:open bits with GDB. Currently, LLDB and GDB use different flag
models effectively making it impossible to match bits. Notably, LLDB
uses two bits to indicate read and write status, and uses union of both
for read/write. GDB uses a value of 0 for read-only, 1 for write-only
and 2 for read/write.
In order to future-proof the code for the GDB variant:
1. Add a distinct eOpenOptionReadWrite constant to be used instead
of (eOpenOptionRead | eOpenOptionWrite) when R/W access is required.
2. Rename eOpenOptionRead and eOpenOptionWrite to eOpenOptionReadOnly
and eOpenOptionWriteOnly respectively, to make it clear that they
do not mean to be combined and require update to all call sites.
3. Use the intersection of all three flags when matching against
the three possible values.
This commit does not change the actual bits used by LLDB.
Differential Revision: https://reviews.llvm.org/D106984
|
|
LLVM includes this header unconditionally on all platforms
(including Windows), so this define should no longer be necessary.
No behavior change.
Differential Revision: https://reviews.llvm.org/D107338
|
|
Replace default bodies of special member functions with = default;
$ run-clang-tidy.py -header-filter='lldb' -checks='-*,modernize-use-equals-default' -fix ,
https://clang.llvm.org/extra/clang-tidy/checks/modernize-use-equals-default.html
Differential revision: https://reviews.llvm.org/D104041
|
|
The C headers are deprecated so as requested in D102845, this is replacing them
all with their (not deprecated) C++ equivalent.
Reviewed By: shafik
Differential Revision: https://reviews.llvm.org/D103084
|
|
LLDB uses utility functions to run code in the inferior for its own
internal purposes, such as reading classes from the Objective-C runtime
for example. Because these expressions should be transparent to the
user, we ignore breakpoints and unwind the stack on errors, which
makes them hard to debug.
This patch adds a new setting target.debug-utility-expression that, when
enabled, changes these options to facilitate debugging. It enables
breakpoints, disables unwinding and writes out the utility function
source code to disk so it shows up in the source view.
Differential revision: https://reviews.llvm.org/D97249
|
|
g_expression_prefix, as the name implies, must be perfixed, not
suffixed.
|
|
The UtilityFunction ctor was dropping the text argument. Probably for
that reason ClangUtilityFunction was setting the parent's member
directly instead of deferring to the parent ctor. Also change the
signatures to take strings which are std::moved in place.
|
|
Update the rest of lldb to use std::make_unique<>. I used clang-tidy to
automate this, which probably missed cases that are wrapped in ifdefs.
|
|
Summary:
lldb-forward.h is convenient in many ways, but having clang-based
class forward declarations in there makes it easy to proliferate uses of clang
outside of plugins. Removing them makes you much more conscious of when
you're using something from clang and marks where we're using things
from clang in non-plugins.
Differential Revision: https://reviews.llvm.org/D73935
|
|
Target is one of the classes responsible for vending ClangASTImporter.
Target doesn't need to know anything about ClangASTImporter, so if we
instead have ClangPersistentVariables vend it, we can preserve
existing behavior while improving layering and removing dependencies
from non-plugins to plugins.
|
|
Summary:
A *.cpp file header in LLDB (and in LLDB) should like this:
```
//===-- TestUtilities.cpp -------------------------------------------------===//
```
However in LLDB most of our source files have arbitrary changes to this format and
these changes are spreading through LLDB as folks usually just use the existing
source files as templates for their new files (most notably the unnecessary
editor language indicator `-*- C++ -*-` is spreading and in every review
someone is pointing out that this is wrong, resulting in people pointing out that this
is done in the same way in other files).
This patch removes most of these inconsistencies including the editor language indicators,
all the different missing/additional '-' characters, files that center the file name, missing
trailing `===//` (mostly caused by clang-format breaking the line).
Reviewers: aprantl, espindola, jfb, shafik, JDevlieghere
Reviewed By: JDevlieghere
Subscribers: dexonsmith, wuzish, emaste, sdardis, nemanjai, kbarton, MaskRay, atanasyan, arphaman, jfb, abidh, jsji, JDevlieghere, usaxena95, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D73258
|
|
a Target and add basic unit test
The ClangExpressionDeclMap should be testable from a unit test. This is currently
impossible as they have both dependencies on Target/ExecutionContext from their
constructor. This patch allows constructing these classes without an active Target
and adds the missing tests for running without a target that we can do at least
a basic lookup test without crashing.
|
|
Summary:
swift-lldb currently has to patch the ExpressionKind enum to add support for Swift expressions. If we implement LLVM's RTTI
with a static ID variable instead of a centralised enum we can drop that patch.
Reviewers: labath, davide
Reviewed By: labath
Subscribers: JDevlieghere, lldb-commits
Tags: #upstreaming_lldb_s_downstream_patches, #lldb
Differential Revision: https://reviews.llvm.org/D70070
|
|
Summary:
After rL368069 I noticed that HAVE_SYS_TYPES_H is not defined in
Platform.h, or anywhere else in lldb. This change fixes that.
Reviewers: labath
Subscribers: mgorny, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D65822
llvm-svn: 368125
|
|
Summary:
NFC = [[ https://llvm.org/docs/Lexicon.html#nfc | Non functional change ]]
This commit is the result of modernizing the LLDB codebase by using
`nullptr` instread of `0` or `NULL`. See
https://clang.llvm.org/extra/clang-tidy/checks/modernize-use-nullptr.html
for more information.
This is the command I ran and I to fix and format the code base:
```
run-clang-tidy.py \
-header-filter='.*' \
-checks='-*,modernize-use-nullptr' \
-fix ~/dev/llvm-project/lldb/.* \
-format \
-style LLVM \
-p ~/llvm-builds/debug-ninja-gcc
```
NOTE: There were also changes to `llvm/utils/unittest` but I did not
include them because I felt that maybe this library shall be updated in
isolation somehow.
NOTE: I know this is a rather large commit but it is a nobrainer in most
parts.
Reviewers: martong, espindola, shafik, #lldb, JDevlieghere
Reviewed By: JDevlieghere
Subscribers: arsenm, jvesely, nhaehnle, hiraditya, JDevlieghere, teemperor, rnkovacs, emaste, kubamracek, nemanjai, ki.stfu, javed.absar, arichardson, kbarton, jrtc27, MaskRay, atanasyan, dexonsmith, arphaman, jfb, jsji, jdoerfert, lldb-commits, llvm-commits
Tags: #lldb, #llvm
Differential Revision: https://reviews.llvm.org/D61847
llvm-svn: 361484
|
|
A lot of comments in LLDB are surrounded by an ASCII line to delimit the
begging and end of the comment.
Its use is not really consistent across the code base, sometimes the
lines are longer, sometimes they are shorter and sometimes they are
omitted. Furthermore, it looks kind of weird with the 80 column limit,
where the comment actually extends past the line, but not by much.
Furthermore, when /// is used for Doxygen comments, it looks
particularly odd. And when // is used, it incorrectly gives the
impression that it's actually a Doxygen comment.
I assume these lines were added to improve distinguishing between
comments and code. However, given that todays editors and IDEs do a
great job at highlighting comments, I think it's worth to drop this for
the sake of consistency. The alternative is fixing all the
inconsistencies, which would create a lot more churn.
Differential revision: https://reviews.llvm.org/D60508
llvm-svn: 358135
|
|
This was found by the green dragon sanitizer bot.
rdar://problem/48536644
Differential Revision: https://reviews.llvm.org/D59314
llvm-svn: 356090
|
|
This changes '@' prefix to '\'.
llvm-svn: 355841
|
|
clang plugin.
NFC
Differential Revision: https://reviews.llvm.org/D59040
llvm-svn: 355560
|
|
Summary:
This patch adds support of expression evaluation in a context of some object.
Consider the following example:
```
struct S {
int a = 11;
int b = 12;
};
int main() {
S s;
int a = 1;
int b = 2;
// We have stopped here
return 0;
}
```
This patch allows to do something like that:
```
lldb.frame.FindVariable("s").EvaluateExpression("a + b")
```
and the result will be `33` (not `3`) because fields `a` and `b` of `s` will be
used (not locals `a` and `b`).
This is achieved by replacing of `this` type and object for the expression. This
has some limitations: an expression can be evaluated only for values located in
the debuggee process memory (they must have an address of `eAddressTypeLoad`
type).
Reviewers: teemperor, clayborg, jingham, zturner, labath, davide, spyffe, serge-sans-paille
Reviewed By: jingham
Subscribers: abidh, lldb-commits, leonid.mashinskiy
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D55318
llvm-svn: 353149
|
|
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
|
|
This patch removes the comments grouping header includes. They were
added after running IWYU over the LLDB codebase. However they add little
value, are often outdates and burdensome to maintain.
llvm-svn: 346626
|
|
llvm-svn: 316529
|
|
This renames the LLDB error class to Status, as discussed
on the lldb-dev mailing list.
A change of this magnitude cannot easily be done without
find and replace, but that has potential to catch unwanted
occurrences of common strings such as "Error". Every effort
was made to find all the obvious things such as the word "Error"
appearing in a string, etc, but it's possible there are still
some lingering occurences left around. Hopefully nothing too
serious.
llvm-svn: 302872
|
|
All references to Host and Core have been removed, so this
class can now safely be lowered into Utility.
Differential Revision: https://reviews.llvm.org/D30559
llvm-svn: 296909
|
|
This moves the following classes from Core -> Utility.
ConstString
Error
RegularExpression
Stream
StreamString
The goal here is to get lldbUtility into a state where it has
no dependendencies except on itself and LLVM, so it can be the
starting point at which to start untangling LLDB's dependencies.
These are all low level and very widely used classes, and
previously lldbUtility had dependencies up to lldbCore in order
to use these classes. So moving then down to lldbUtility makes
sense from both the short term and long term perspective in
solving this problem.
Differential Revision: https://reviews.llvm.org/D29427
llvm-svn: 293941
|
|
This diff fixes typos in file headers (incorrect file names).
Test plan:
Under llvm/tools/lldb/source:
find ./* -type f | grep -e '\(cpp\|h\)$' | while read F; do B=$(basename $F); echo $F head -n 1 $F | grep -v $B | wc -l ; done
Differential revision: https://reviews.llvm.org/D27115
llvm-svn: 287966
|
|
llvm-svn: 286730
|
|
*** to conform to clang-format’s LLVM style. This kind of mass change has
*** two obvious implications:
Firstly, merging this particular commit into a downstream fork may be a huge
effort. Alternatively, it may be worth merging all changes up to this commit,
performing the same reformatting operation locally, and then discarding the
merge for this particular commit. The commands used to accomplish this
reformatting were as follows (with current working directory as the root of
the repository):
find . \( -iname "*.c" -or -iname "*.cpp" -or -iname "*.h" -or -iname "*.mm" \) -exec clang-format -i {} +
find . -iname "*.py" -exec autopep8 --in-place --aggressive --aggressive {} + ;
The version of clang-format used was 3.9.0, and autopep8 was 1.2.4.
Secondly, “blame” style tools will generally point to this commit instead of
a meaningful prior commit. There are alternatives available that will attempt
to look through this change and find the appropriate prior commit. YMMV.
llvm-svn: 280751
|
|
<rdar://problem/24306284>
llvm-svn: 274254
|
|
We want to do a better job presenting errors that occur when evaluating
expressions. Key to this effort is getting away from a model where all
errors are spat out onto a stream where the client has to take or leave
all of them.
To this end, this patch adds a new class, DiagnosticManager, which
contains errors produced by the compiler or by LLDB as an expression
is created. The DiagnosticManager can dump itself to a log as well as
to a string. Clients will (in the future) be able to filter out the
errors they're interested in by ID or present subsets of these errors
to the user.
This patch is not intended to change the *users* of errors - only to
thread DiagnosticManagers to all the places where streams are used. I
also attempt to standardize our use of errors a bit, removing trailing
newlines and making clients omit 'error:', 'warning:' etc. and instead
pass the Severity flag.
The patch is testsuite-neutral, with modifications to one part of the
MI tests because it relied on "error: error:" being erroneously
printed. This patch fixes the MI variable handling and the testcase.
<rdar://problem/22864976>
llvm-svn: 263859
|
|
The concept here is that languages may have different ways of communicating
results. In particular, languages may have different names for their result
variables and in fact may have multiple types of result variables (e.g.,
error results). Materializer was tied to one specific model of result handling.
Instead, now UserExpressions can register their own handlers for the result
variables they inject. This allows language-specific code in Materializer to
be moved into the expression parser plug-in, and it simplifies Materializer.
These delegates are subclasses of PersistentVariableDelegate.
PersistentVariableDelegate can provide the name of the result variable, and is
notified when the result variable is populated. It can also be used to touch
persistent variables if need be, updating language-specific state. The
UserExpression owns the delegate and can decide on its result based on
consulting all of its (potentially multiple) delegates.
The user expression itself now makes the determination of what the final result
of the expression is, rather than relying on the Materializer, and I've added a
virtual function to UserExpression to allow this.
llvm-svn: 249233
|
|
There are still a bunch of dependencies on the plug-in, but this helps to
identify them.
There are also a few more bits we need to move (and abstract, for example the
ClangPersistentVariables).
llvm-svn: 248612
|
