| Age | Commit message (Collapse) | Author |
|---|
|
(#161363)
Starting with https://github.com/llvm/llvm-project/pull/148877 we
started encoding the module ID of the function DIE we are currently
parsing into its `AsmLabel` in the AST. When the JIT asks LLDB to
resolve our special mangled name, we would locate the module and resolve
the function/symbol we found in it.
If we are debugging with a `SymbolFileDWARFDebugMap`, the module ID we
encode is that of the `.o` file that is tracked by the debug-map. To
resolve the address of the DIE in that `.o` file, we have to ask
`SymbolFileDWARFDebugMap::LinkOSOAddress` to turn the address of the
`.o` DIE into a real address in the linked executable. This will only
work if the `.o` address was actually tracked by the debug-map. However,
if the function definition appears in multiple `.o` files (which is the
case for functions defined in headers), the linker will most likely
de-deuplicate that definition. So most `.o`'s definition DIEs for that
function won't have a contribution in the debug-map, and thus we fail to
resolve the address.
When debugging Clang on Darwin, e.g., you'd see:
```
(lldb) expr CXXDecl->getName()
error: Couldn't look up symbols:
$__lldb_func::0x1:0x4000d000002359da:_ZNK5clang9NamedDecl7getNameEv
Hint: The expression tried to call a function that is not present in the target, perhaps because it was optimized out by the compiler.
```
unless you were stopped in the `.o` file whose definition of `getName`
made it into the final executable.
The fix here is to error out if we fail to resolve the address, causing
us to fall back on the old flow which did a lookup by mangled name,
which the `SymbolFileDWARFDebugMap` will handle correctly.
An alternative fix to this would be to encode the
`SymbolFileDWARFDebugMap`'s module-id. And implement
`SymbolFileDWARFDebugMap::ResolveFunctionCallLabel` by doing a mangled
name lookup. The proposed approach doesn't stop us from implementing
that, so we could choose to do it in a follow-up.
rdar://161393045
|
|
Depends on
* https://github.com/llvm/llvm-project/pull/148877
* https://github.com/llvm/llvm-project/pull/155483
* https://github.com/llvm/llvm-project/pull/155485
* https://github.com/llvm/llvm-project/pull/154137
* https://github.com/llvm/llvm-project/pull/154142
This patch is an implementation of [this
discussion](https://discourse.llvm.org/t/rfc-lldb-handling-abi-tagged-constructors-destructors-in-expression-evaluator/82816/7)
about handling ABI-tagged structors during expression evaluation.
**Motivation**
LLDB encodes the mangled name of a `DW_TAG_subprogram` into `AsmLabel`s
on function and method Clang AST nodes. This means that when calls to
these functions get lowered into IR (when running JITted expressions),
the address resolver can locate the appropriate symbol by mangled name
(and it is guaranteed to find the symbol because we got the mangled name
from debug-info, instead of letting Clang mangle it based on AST
structure). However, we don't do this for
`CXXConstructorDecl`s/`CXXDestructorDecl`s because these structor
declarations in DWARF don't have a linkage name. This is because there
can be multiple variants of a structor, each with a distinct mangling in
the Itanium ABI. Each structor variant has its own definition
`DW_TAG_subprogram`. So LLDB doesn't know which mangled name to put into
the `AsmLabel`.
Currently this means using ABI-tagged structors in LLDB expressions
won't work (see [this
RFC](https://discourse.llvm.org/t/rfc-lldb-handling-abi-tagged-constructors-destructors-in-expression-evaluator/82816)
for concrete examples).
**Proposed Solution**
The `FunctionCallLabel` encoding that we put into `AsmLabel`s already
supports stuffing more info about a DIE into it. So this patch extends
the `FunctionCallLabel` to contain an optional discriminator (a sequence
of bytes) which the `SymbolFileDWARF` plugin interprets as the
constructor/destructor variant of that DIE. So when searching for the
definition DIE, LLDB will include the structor variant in its heuristic
for determining a match.
There's a few subtleties here:
1. At the point at which LLDB first constructs the label, it has no way
of knowing (just by looking at the debug-info declaration), which
structor variant the expression evaluator is supposed to call. That's
something that gets decided when compiling the expression. So we let the
Clang mangler inject the correct structor variant into the `AsmLabel`
during JITing. I adjusted the `AsmLabelAttr` mangling for this in
https://github.com/llvm/llvm-project/pull/155485. An option would've
been to create a new Clang attribute which behaved like an `AsmLabel`
but with these special semantics for LLDB. My main concern there is that
we'd have to adjust all the `AsmLabelAttr` checks around Clang to also
now account for this new attribute.
2. The compiler is free to omit the `C1` variant of a constructor if the
`C2` variant is sufficient. In that case it may alias `C1` to `C2`,
leaving us with only the `C2` `DW_TAG_subprogram` in the object file.
Linux is one of the platforms where this occurs. For those cases I added
a heuristic in `SymbolFileDWARF` where we pick `C2` if we asked for `C1`
but it doesn't exist. This may not always be correct (e.g., if the
compiler decided to drop `C1` for other reasons).
3. In https://github.com/llvm/llvm-project/pull/154142 Clang will emit
`C4`/`D4` variants of ctors/dtors on declarations. When resolving the
`FunctionCallLabel` we will now substitute the actual variant that Clang
told us we need to call into the mangled name. We do this using LLDB's
`ManglingSubstitutor`. That way we find the definition DIE exactly the
same way we do for regular function calls.
4. In cases where declarations and definitions live in separate modules,
the DIE ID encoded in the function call label may not be enough to find
the definition DIE in the encoded module ID. For those cases we fall
back to how LLDB used to work: look up in all images of the target. To
make sure we don't use the unified mangled name for the fallback lookup,
we change the lookup name to whatever mangled name the FunctionCallLabel
resolved to.
rdar://104968288
|
|
(#157192)
…jectFile API
This avoids code duplication.
|
|
Factors out code to locate a definition DIE from a `FunctionCallLabel`
into a helper. This will be useful for an upcoming refactor that extends
`FindFunctionDefinition`.
Drive-by:
* adjusts some error messages in the `FunctionCallLabel` support code.
|
|
I discovered this building the lldb test suite with `-mthumb` set, so
that all test programs are purely Arm Thumb code.
When C++ expressions did a function lookup, they took a different path
from C programs. That path happened to land on the line that I've
changed. Where we try to look something up as a function, but don't then
resolve the address as if it's a callable.
With Thumb, if you do the non-callable lookup, the bottom bit won't be
set. This means when lldb's expression wrapper function branches into
the found function, it'll be in Arm mode trying to execute Thumb code.
Thumb is the only instance where you'd notice this. Aside from maybe
MicroMIPS or MIPS16 perhaps but I expect that there are 0 users of that
and lldb.
I have added a new test case that will simulate this situation in
"normal" Arm builds so that it will get run on Linaro's buildbot.
This change also fixes the following existing tests when `-mthumb` is
used:
```
lldb-api :: commands/expression/anonymous-struct/TestCallUserAnonTypedef.py
lldb-api :: commands/expression/argument_passing_restrictions/TestArgumentPassingRestrictions.py
lldb-api :: commands/expression/call-function/TestCallStopAndContinue.py
lldb-api :: commands/expression/call-function/TestCallUserDefinedFunction.py
lldb-api :: commands/expression/char/TestExprsChar.py
lldb-api :: commands/expression/class_template_specialization_empty_pack/TestClassTemplateSpecializationParametersHandling.py
lldb-api :: commands/expression/context-object/TestContextObject.py
lldb-api :: commands/expression/formatters/TestFormatters.py
lldb-api :: commands/expression/import_base_class_when_class_has_derived_member/TestImportBaseClassWhenClassHasDerivedMember.py
lldb-api :: commands/expression/inline-namespace/TestInlineNamespace.py
lldb-api :: commands/expression/namespace-alias/TestInlineNamespaceAlias.py
lldb-api :: commands/expression/no-deadlock/TestExprDoesntBlock.py
lldb-api :: commands/expression/pr35310/TestExprsBug35310.py
lldb-api :: commands/expression/static-initializers/TestStaticInitializers.py
lldb-api :: commands/expression/test/TestExprs.py
lldb-api :: commands/expression/timeout/TestCallWithTimeout.py
lldb-api :: commands/expression/top-level/TestTopLevelExprs.py
lldb-api :: commands/expression/unwind_expression/TestUnwindExpression.py
lldb-api :: commands/expression/xvalue/TestXValuePrinting.py
lldb-api :: functionalities/thread/main_thread_exit/TestMainThreadExit.py
lldb-api :: lang/cpp/call-function/TestCallCPPFunction.py
lldb-api :: lang/cpp/chained-calls/TestCppChainedCalls.py
lldb-api :: lang/cpp/class-template-parameter-pack/TestClassTemplateParameterPack.py
lldb-api :: lang/cpp/constructors/TestCppConstructors.py
lldb-api :: lang/cpp/function-qualifiers/TestCppFunctionQualifiers.py
lldb-api :: lang/cpp/function-ref-qualifiers/TestCppFunctionRefQualifiers.py
lldb-api :: lang/cpp/global_operators/TestCppGlobalOperators.py
lldb-api :: lang/cpp/llvm-style/TestLLVMStyle.py
lldb-api :: lang/cpp/multiple-inheritance/TestCppMultipleInheritance.py
lldb-api :: lang/cpp/namespace/TestNamespace.py
lldb-api :: lang/cpp/namespace/TestNamespaceLookup.py
lldb-api :: lang/cpp/namespace_conflicts/TestNamespaceConflicts.py
lldb-api :: lang/cpp/operators/TestCppOperators.py
lldb-api :: lang/cpp/overloaded-functions/TestOverloadedFunctions.py
lldb-api :: lang/cpp/rvalue-references/TestRvalueReferences.py
lldb-api :: lang/cpp/static_methods/TestCPPStaticMethods.py
lldb-api :: lang/cpp/template/TestTemplateArgs.py
lldb-api :: python_api/thread/TestThreadAPI.py
```
There are other failures that are due to different problems, and this
change does not make those worse.
(I have no plans to run the test suite with `-mthumb` regularly, I just
did it to test some other refactoring)
|
|
LLDB currently attaches `AsmLabel`s to `FunctionDecl`s such that that
the `IRExecutionUnit` can determine which mangled name to call (we can't
rely on Clang deriving the correct mangled name to call because the
debug-info AST doesn't contain all the info that would be encoded in the
DWARF linkage names). However, we don't attach `AsmLabel`s for structors
because they have multiple variants and thus it's not clear which
mangled name to use. In the [RFC on fixing expression evaluation of
abi-tagged
structors](https://discourse.llvm.org/t/rfc-lldb-handling-abi-tagged-constructors-destructors-in-expression-evaluator/82816)
we discussed encoding the structor variant into the `AsmLabel`s.
Specifically in [this
thread](https://discourse.llvm.org/t/rfc-lldb-handling-abi-tagged-constructors-destructors-in-expression-evaluator/82816/7)
we discussed that the contents of the `AsmLabel` are completely under
LLDB's control and we could make use of it to uniquely identify a
function by encoding the exact module and DIE that the function is
associated with (mangled names need not be enough since two identical
mangled symbols may live in different modules). So if we already have a
custom `AsmLabel` format, we can encode the structor variant in a
follow-up (the current idea is to append the structor variant as a
suffix to our custom `AsmLabel` when Clang emits the mangled name into
the JITted IR). Then we would just have to teach the `IRExecutionUnit`
to pick the correct structor variant DIE during symbol resolution. The
draft of this is available
[here](https://github.com/llvm/llvm-project/pull/149827)
This patch sets up the infrastructure for the custom `AsmLabel` format
by encoding the module id, DIE id and mangled name in it.
**Implementation**
The flow is as follows:
1. Create the label in `DWARFASTParserClang`. The format is:
`$__lldb_func:module_id:die_id:mangled_name`
2. When resolving external symbols in `IRExecutionUnit`, we parse this
label and then do a lookup by DIE ID (or mangled name into the module if
the encoded DIE is a declaration).
Depends on https://github.com/llvm/llvm-project/pull/151355
|
|
The only place that passes a target to `LoadAddressResolver` already
checks for pointer validity. And inside of the resolver we have been
dereferencing the target anyway without nullptr checks. So codify the
non-nullness of `m_target` by making it a reference.
|
|
This will make changes in #145599 a bit nicer.
|
|
expression evaluation (#129733)
The `TestMemoryHistory.py`/`TestReportData.py` are currently failing on
the x86 macOS CI (started after we upgraded the Xcode SDK on that
machien). The LLDB ASAN utility expression is failing to run with
following error:
```
(lldb) image lookup -n __asan_get_alloc_stack
1 match found in /usr/lib/system/libsystem_sanitizers.dylib:
Address: libsystem_sanitizers.dylib[0x00007ffd11e673f7] (libsystem_sanitizers.dylib.__TEXT.__text + 11287)
Summary: libsystem_sanitizers.dylib`__asan_get_alloc_stack
1 match found in /Users/michaelbuch/Git/lldb-build-main-no-modules/lib/clang/21/lib/darwin/libclang_rt.asan_osx_dynamic.dylib:
Address: libclang_rt.asan_osx_dynamic.dylib[0x0000000000009ec0] (libclang_rt.asan_osx_dynamic.dylib.__TEXT.__text + 34352)
Summary: libclang_rt.asan_osx_dynamic.dylib`::__asan_get_alloc_stack(__sanitizer::uptr, __sanitizer::uptr *, __sanitizer::uptr, __sanitizer::u32 *) at asan_debugging.cpp:132
(lldb) memory history 'pointer'
Assertion failed: ((uintptr_t)addr == report.access.address), function __asan_get_alloc_stack, file debugger_abi.cpp, line 62.
warning: cannot evaluate AddressSanitizer expression:
error: Expression execution was interrupted: signal SIGABRT.
The process has been returned to the state before expression evaluation.
```
The reason for this is that the system sanitizer dylib and the locally
built libclang_rt contain the same symbol `__asan_get_alloc_stack`, and
depending on the order in which they're loaded, we may pick the one from
the wrong dylib (this probably changed during the buildbot upgrade and
is why it only now started failing). Based on discussion with @wrotki we
always want to pick the one that's in the libclang_rt dylib if it was
loaded, and libsystem_sanitizers otherwise.
This patch addresses this by adding a "preferred lookup context list" to
the expression evaluator. Currently this is only exposed in the
`EvaluateExpressionOptions`. We make it a `SymbolContextList` in case we
want the lookup contexts to be contexts other than modules (e.g., source
files, etc.). In `IRExecutionUnit` we make it a `ModuleList` because it
makes the symbol lookup implementation simpler and we only do module
lookups here anyway. If we ever need it to be a `SymbolContext`, that
transformation shouldn't be too difficult.
|
|
Many calls to Function::GetAddressRange() were not interested in the
range itself. Instead they wanted to find the address of the function
(its entry point) or the base address for relocation of function-scoped
entities (technically, the two don't need to be the same, but there's
isn't good reason for them not to be). This PR creates a separate
function for retrieving this, and changes the existing
(non-controversial) uses to call that instead.
|
|
Add the ability to override the disassembly CPU and CPU features through
a target setting (`target.disassembly-cpu` and
`target.disassembly-features`) and a `disassemble` command option
(`--cpu` and `--features`).
This is especially relevant for architectures like RISC-V which relies
heavily on CPU extensions.
The majority of this patch is plumbing the options through. I recommend
looking at DisassemblerLLVMC and the test for the observable change in
behavior.
|
|
When we search for a symbol, we first check if it is in the module_sp of
the current SymbolContext, and if not, we check in the target's modules.
However, the target's ModuleList also includes the already checked
module, which leads to a redundant search in it.
|
|
[lldb][RISCV] add jitted function calls to ABI
Function calls support in LLDB expressions for RISCV: 1 of 4
Augments corresponding functionality to RISCV ABI, which allows to jit
lldb expressions and thus make function calls inside them. Only function
calls with integer and void function arguments and return value are
supported.
[lldb][RISCV] add JIT relocations resolver
Function calls support in LLDB expressions for RISCV: 2 of 4
Adds required RISCV relocations resolving functionality in lldb
ExecutionEngine.
[lldb][RISCV] RISC-V large code model in lldb expressions
Function calls support in LLDB expressions for RISCV: 3 of 4
This patch sets large code model in MCJIT settings for RISC-V 64-bit targets
that allows to make assembly jumps at any 64bit address. This is needed,
because resulted jitted code may contain more that +-2GB jumps, that are
not available in RISC-V with medium code model.
[lldb][RISCV] doubles support in lldb expressions
Function calls support in LLDB expressions for RISCV: 4 of 4
This patch adds desired feature flags in MCJIT compiler to enable
hard-float instructions if target supports them and allows to use floats
and doubles in lldb expressions.
|
|
As specified in the docs,
1) raw_string_ostream is always unbuffered and
2) the underlying buffer may be used directly
( 65b13610a5226b84889b923bae884ba395ad084d for further reference )
* Don't call raw_string_ostream::flush(), which is essentially a no-op.
* Avoid unneeded calls to raw_string_ostream::str(), to avoid excess
indirection.
|
|
This patch removes all of the Set.* methods from Status.
This cleanup is part of a series of patches that make it harder use the
anti-pattern of keeping a long-lives Status object around and updating
it while dropping any errors it contains on the floor.
This patch is largely NFC, the more interesting next steps this enables
is to:
1. remove Status.Clear()
2. assert that Status::operator=() never overwrites an error
3. remove Status::operator=()
Note that step (2) will bring 90% of the benefits for users, and step
(3) will dramatically clean up the error handling code in various
places. In the end my goal is to convert all APIs that are of the form
` ResultTy DoFoo(Status& error)
`
to
` llvm::Expected<ResultTy> DoFoo()
`
How to read this patch?
The interesting changes are in Status.h and Status.cpp, all other
changes are mostly
` perl -pi -e 's/\.SetErrorString/ = Status::FromErrorString/g' $(git
grep -l SetErrorString lldb/source)
`
plus the occasional manual cleanup.
|
|
(NFC) (#92476)
Note that StringRef::equals has been deprecated in favor of
operator==(StringRef, StringRef).
|
|
This adds a hint to the missing symbols error message to make it easier
to understand what this means to users.
[Reapplies an earlier patch with a test fix.]
|
|
This reverts commit 08163cd9d82690e808c28515523b5fd0923d7b38.
I accidentally broke the test while addressing review feedback.
|
|
This adds a hint to the missing symbols error message to make it easier
to understand what this means to users.
|
|
It breaks expression evaluation on arm, and the x86 breakage has been
fixed in 6cea7c491f4c4c68aa0494a9b18f36ff40c22c81.
This reverts commit 915c84b1480bb3c6d2e44ca83822d2c2304b763a.
|
|
After 281d71604f418eb952e967d9dc4b26241b7f96a, llvm generates 32-bit
relocations, which overflow when we load these objects into high memory.
Interestingly, setting the code model to "large" does not help here
(perhaps it is the default?). I'm not completely sure that this is the
right thing to do, but it doesn't seem to cause any ill effects. I'll
follow up with the author of that patch about the expected behavior
here.
|
|
by handling *all* errors in IRExecDiagnosticHandler. The function that
call this handles all unhandled errors with an `exit(1)`.
rdar://124459751
I don't really have a testcase for this, since the crash report I got
for this involved the Swift language plugin.
|
|
Walter Erquinigo added optional instruction annotations for x86
instructions in 2022 for the `thread trace dump instruction` command,
and code to DisassemblerLLVMC to add annotations for instructions that
change flow control, v. https://reviews.llvm.org/D128477
This was added as an option to `disassemble`, and the trace dump command
enables it by default, but several other instruction dumpers were
changed to display them by default as well. These are only implemented
for Intel instructions, so our disassembly on other targets ends up
looking like
```
(lldb) x/5i 0x1000086e4
0x1000086e4: 0xa9be6ffc unknown stp x28, x27, [sp, #-0x20]!
0x1000086e8: 0xa9017bfd unknown stp x29, x30, [sp, #0x10]
0x1000086ec: 0x910043fd unknown add x29, sp, #0x10
0x1000086f0: 0xd11843ff unknown sub sp, sp, #0x610
0x1000086f4: 0x910c63e8 unknown add x8, sp, #0x318
```
instead of `disassemble`'s output style of
```
lldb`main:
lldb[0x1000086e4] <+0>: stp x28, x27, [sp, #-0x20]!
lldb[0x1000086e8] <+4>: stp x29, x30, [sp, #0x10]
lldb[0x1000086ec] <+8>: add x29, sp, #0x10
lldb[0x1000086f0] <+12>: sub sp, sp, #0x610
lldb[0x1000086f4] <+16>: add x8, sp, #0x318
```
Adding symbolic annotations for assembly instructions is something I'm
interested in too, because we may have users investigating a crash or
apparent-incorrect behavior who must debug optimized assembly and they
may not be familiar with the ISA they're using, so short of flipping
through a many-thousand-page PDF to understand each instruction, they're
lost. They don't write assembly or work at that level, but to understand
a bug, they have to understand what the instructions are actually doing.
But the annotations that exist today don't move us forward much on that
front - I'd argue that the flow control instructions on Intel are not
hard to understand from their names, but that might just be my personal
bias. Much trickier instructions exist in any event.
Displaying this information by default for all targets when we only have
one class of instructions on one target is not a good default.
Also, in 2011 when Greg implemented the `memory read -f i` (aka `x/i`)
command
```
commit 5009f9d5010a7e34ae15f962dac8505ea11a8716
Author: Greg Clayton <gclayton@apple.com>
Date: Thu Oct 27 17:55:14 2011 +0000
[...]
eFormatInstruction will print out disassembly with bytes and it will use the
current target's architecture. The format character for this is "i" (which
used to be being used for the integer format, but the integer format also has
"d", so we gave the "i" format to disassembly), the long format is
"instruction".
```
he had DumpDataExtractor's DumpInstructions print the bytes of the
instruction -- that's the first field we see above for the `x/5i` after
the address -- and this is only useful for people who are debugging the
disassembler itself, I would argue. I don't want this displayed by
default either.
tl;dr this patch removes both fields from `memory read -f -i` and I
think this is the right call today. While I'm really interested in
instruction annotation, I don't think `x/i` is the right place to have
it enabled by default unless it's really compelling on at least some of
our major targets.
|
|
This patch replaces uses of StringRef::{starts,ends}with with
StringRef::{starts,ends}_with for consistency with
std::{string,string_view}::{starts,ends}_with in C++20.
I'm planning to deprecate and eventually remove
StringRef::{starts,ends}with.
|
|
(#66295)
This will make it easy for callers to see issues with and fix up calls
to createTargetMachine after a future change to the params of
TargetMachine.
This matches other nearby enums.
For downstream users, this should be a fairly straightforward
replacement,
e.g. s/CodeGenOpt::Aggressive/CodeGenOptLevel::Aggressive
or s/CGFT_/CodeGenFileType::
|
|
The error message "Couldn't lookup symbols" emitted from IRExecutionUnit
is grammatically incorrect. "Lookup" is noun when spelled without a
space. Update the error message to use the verb "look up" instead.
|
|
In the spirit of not having lldbExpression rely on plugins, this move
makes the most sense. ObjectFileJIT is not really a "plugin" in the
sense that without it, expression evaluation doesn't work at all. This
is different than something like ObjectFileELF where lldb can still
technically debug non-ELF targets without it. For that reason, moving
ObjectFileJIT into Expression where it will be used in conjunction with
IRExecutionUnit makes the most sense.
Differential Revision: https://reviews.llvm.org/D147084
|
|
This reverts commit cb5f239363a3c94db5425c105fcd45e77d2a16a9.
|
|
This reverts commit ed3e3ee9e30dfbffd2170a770a49b36a7f444916.
|
|
This patch adds several missing GlobalList modifier functions, like
removeGlobalVariable(), eraseGlobalVariable() and insertGlobalVariable().
There is no longer need to access the list directly so it also makes
getGlobalList() private.
Differential Revision: https://reviews.llvm.org/D144027
|
|
This reverts commit 6d4a674acbc56458bb084878d82d16e393d45a6b.
|
|
This reverts commit b64f7d028bdcaf679130afeed9518c09663f6dc8.
|
|
This patch adds several missing AliasList modifier functions, like
removeAlias(), eraseAlias() and insertAlias().
There is no longer need to access the list directly so it also makes
getAliaList() private.
Differential Revision: https://reviews.llvm.org/D143958
|
|
This patch replaces (llvm::|)Optional< with std::optional<. I'll post
a separate patch to clean up the "using" declarations, #include
"llvm/ADT/Optional.h", etc.
This is part of an effort to migrate from llvm::Optional to
std::optional:
https://discourse.llvm.org/t/deprecating-llvm-optional-x-hasvalue-getvalue-getvalueor/63716
|
|
This patch adds #include <optional> to those files containing
llvm::Optional<...> or Optional<...>.
I'll post a separate patch to actually replace llvm::Optional with
std::optional.
This is part of an effort to migrate from llvm::Optional to
std::optional:
https://discourse.llvm.org/t/deprecating-llvm-optional-x-hasvalue-getvalue-getvalueor/63716
|
|
This patch mechanically replaces None with std::nullopt where the
compiler would warn if None were deprecated. The intent is to reduce
the amount of manual work required in migrating from Optional to
std::optional.
This is part of an effort to migrate from llvm::Optional to
std::optional:
https://discourse.llvm.org/t/deprecating-llvm-optional-x-hasvalue-getvalue-getvalueor/63716
|
|
To build complex binding upon instruction trace, additional metadata 'instruction type' is needed.
This diff has followings:
- Add a flag -k / --kind for instruction dump
- Remove SetGranularity and SetIgnoreErros from Trace cursor
Sample output:
```
(lldb) thread trace dump instruction -k
thread #1: tid = 3198805
libc.so.6`_IO_puts + 356
2107: 0x00007ffff7163594 ( return) retq
2106: 0x00007ffff7163592 ( other) popq %r13
2105: 0x00007ffff7163590 ( other) popq %r12
2104: 0x00007ffff716358f ( other) popq %rbp
2103: 0x00007ffff716358e ( other) popq %rbx
2102: 0x00007ffff716358c ( other) movl %ebx, %eax
2101: 0x00007ffff7163588 ( other) addq $0x8, %rsp
2100: 0x00007ffff7163570 ( cond jump) je 0x89588 ; <+344>
2099: 0x00007ffff716356e ( other) decl (%rdx)
2098: 0x00007ffff7163565 ( cond jump) je 0x8956e ; <+318>
2097: 0x00007ffff716355e ( other) cmpl $0x0, 0x33c02b(%rip) ; __libc_multiple_threads
2096: 0x00007ffff7163556 ( other) movq $0x0, 0x8(%rdx)
2095: 0x00007ffff7163554 ( cond jump) jne 0x89588 ; <+344>
2094: 0x00007ffff7163550 ( other) subl $0x1, 0x4(%rdx)
2093: 0x00007ffff7163549 ( other) movq 0x88(%rbp), %rdx
2092: 0x00007ffff7163547 ( cond jump) jne 0x89588 ; <+344>
2091: 0x00007ffff7163540 ( other) testl $0x8000, (%rbp) ; imm = 0x8000
2090: 0x00007ffff716353c ( other) cmovaq %rax, %rbx
2089: 0x00007ffff7163535 ( other) cmpq $0x7fffffff, %rbx ; imm = 0x7FFFFFFF
2088: 0x00007ffff7163530 ( other) movl $0x7fffffff, %eax ; imm = 0x7FFFFFFF
```
Reviewed By: wallace
Differential Revision: https://reviews.llvm.org/D128477
|
|
Currently, all data buffers are assumed to be writable. This is a
problem on macOS where it's not allowed to load unsigned binaries in
memory as writable. To be more precise, MAP_RESILIENT_CODESIGN and
MAP_RESILIENT_MEDIA need to be set for mapped (unsigned) binaries on our
platform.
Binaries are mapped through FileSystem::CreateDataBuffer which returns a
DataBufferLLVM. The latter is backed by a llvm::WritableMemoryBuffer
because every DataBuffer in LLDB is considered to be writable. In order
to use a read-only llvm::MemoryBuffer I had to split our abstraction
around it.
This patch distinguishes between a DataBuffer (read-only) and
WritableDataBuffer (read-write) and updates LLDB to use the appropriate
one.
rdar://74890607
Differential revision: https://reviews.llvm.org/D122856
|
|
The old command wrote to CWD, which doesn't always work, and if it
didn't, there was no workaround (and it crashed on failure). This
patch changed the setting to provide a directory to save the objects
to.
Differential Revision: https://reviews.llvm.org/D121036
|
|
Most of our code was including Log.h even though that is not where the
"lldb" log channel is defined (Log.h defines the generic logging
infrastructure). This worked because Log.h included Logging.h, even
though it should.
After the recent refactor, it became impossible the two files include
each other in this direction (the opposite inclusion is needed), so this
patch removes the workaround that was put in place and cleans up all
files to include the right thing. It also renames the file to LLDBLog to
better reflect its purpose.
|
|
|
|
Identified with readability-redundant-control-flow.
|
|
This change accomplishes the following:
- Moves `IRExecutionUnit::FindBestAlternateMangledName` to `Language`.
- Renames `FindBestAlternateMangledName` to
`FindBestAlternateFunctionMangledName`
- Changes the first parameter of said method from a `ConstString`
representing a demangled name to a `Mangled`.
- Remove the use of CPlusPlusLanguage from Expression
|
|
The work that IRExecutionUnit::CollectFallbackNames is basically the
work that `CPlusPlusLanguage::GetDemangledFunctionNameWithoutArguments`
does already. It's also (at time or writing) specific to C++, so it can
be folded into `IRExecutionUnit::CollectCandidateCPlusPlusNames`.
Differential Revision: https://reviews.llvm.org/D109928
|
|
I have 2 goals with this change:
1. Disambiguate between CPlusPlus::FindAlternateFunctionManglings and
IRExecutionUnit::FindBestAlternateMangledName. These are named very
similar things, they try to do very similar things, but their
approaches are different. This change should make it clear that one
is generating possible alternate manglings (through some
heuristics-based approach) and the other is finding alternate
manglings (through searching the SymbolFile for potential matches).
2. Change GenerateAlternateFunctionManglings from a static method in
CPlusPlusLanguage to a virtual method in Language. This will allow us
to remove a direct use of CPlusPlusLanguage in IRExecutionUnit,
further pushing it to be more general. This change doesn't meet this
goal completely but allows for it to happen later.
Though this doesn't remove IRExecutionUnit's dependency on
CPlusPlusLanguage, it does bring us closer to that goal.
Differential Revision: https://reviews.llvm.org/D109785
|
|
IRExecutionUnit::SearchSpec is a struct that encapsulates information
needed to look for a symbol. Specifically, it is comprised of a name
represented with a ConstString and a FunctionNameType mask.
Because the mask is unused (effectively always set to
eFunctionNameTypeFull), we can remove the mask and replace all uses with
eFunctionNameTypeFull. After doing that, SearchSpec is effectively a
wrapper around a ConstString.
As an aside, SearchSpec is similar in purpose to Module::LookupInfo. I
briefly considered replacing uses of SearchSpec with LookupInfo, but
the current code only cares about symbol names (treating them as
eFunctionNameTypeFull). This code does care about language type, so
LookupInfo may be appropriate for IRExecutionUnit in the future.
Differential Revision: https://reviews.llvm.org/D109384
|
|
This patch refactors IRExecutionUnit::FindInSymbols. It eliminates a few
potential pitfalls and tries to be more explicit about the state carried
between symbol resolution attempts.
Differential revision: https://reviews.llvm.org/D107206
|
|
Rather than passing two booleans around, which is especially error prone
with them being next to each other, use a struct with named fields
instead.
Differential revision: https://reviews.llvm.org/D107295
|
|
Replace default bodies of special member functions with = default;
$ run-clang-tidy.py -header-filter='lldb' -checks='-*,modernize-use-equals-default' -fix ,
https://clang.llvm.org/extra/clang-tidy/checks/modernize-use-equals-default.html
Differential revision: https://reviews.llvm.org/D104041
|
|
The situation with inline asm/MC error reporting is kind of messy at the
moment. The errors from MC layout are not reliably propagated and users
have to specify an inlineasm handler separately to get inlineasm
diagnose. The latter issue is not a correctness issue but could be improved.
* Kill LLVMContext inlineasm diagnose handler and migrate it to use
DiagnoseInfo/DiagnoseHandler.
* Introduce `DiagnoseInfoSrcMgr` to diagnose SourceMgr backed errors. This
covers use cases like inlineasm, MC, and any clients using SourceMgr.
* Move AsmPrinter::SrcMgrDiagInfo and its instance to MCContext. The next step
is to combine MCContext::SrcMgr and MCContext::InlineSrcMgr because in all
use cases, only one of them is used.
* If LLVMContext is available, let MCContext uses LLVMContext's diagnose
handler; if LLVMContext is not available, MCContext uses its own default
diagnose handler which just prints SMDiagnostic.
* Change a few clients(Clang, llc, lldb) to use the new way of reporting.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D97449
|
