| Age | Commit message (Collapse) | Author |
|---|
|
Generate nuw GEPs for struct member accesses, as inbounds + non-negative
implies nuw.
Regression tests are updated using update scripts where possible, and by
find + replace where not.
|
|
The default version of OpenMP is updated from 5.0 to 5.1 which means if -fopenmp is specified but -fopenmp-version is not specified with clang, the default version of OpenMP is taken to be 5.1. After modifying the Frontend for that, various LIT tests were updated. This patch contains all such changes. At a high level, these are the patterns of changes observed in LIT tests -
# RUN lines which mentioned `-fopenmp-version=50` need to kept only if the IR for version 5.0 and 5.1 are different. Otherwise only one RUN line with no version info(i.e. default version) needs to be there.
# Test cases of this sort already had the RUN lines with respect to the older default version 5.0 and the version 5.1. Only swapping the version specification flag `-fopenmp-version` from newer version RUN line to older version RUN line is required.
# Diagnostics: Remove the 5.0 version specific RUN lines if there was no difference in the Diagnostics messages with respect to the default 5.1.
# Diagnostics: In case there was any difference in diagnostics messages between 5.0 and 5.1, mention version specific messages in tests.
# If the test contained version specific ifdef's e.g. "#ifdef OMP5" but there were no RUN lines for any other version than 5.X, then bring the code guarded by ifdef's outside and remove the ifdef's.
# Some tests had RUN lines for both 5.0 and 5.1 versions, but it is found that the IR for 5.0 is not different from the 5.1, therefore such RUN lines are redundant. So, such duplicated lines are removed.
# To generate CHECK lines automatically, use the script llvm/utils/update_cc_test_checks.py
Reviewed By: saiislam, ABataev
Differential Revision: https://reviews.llvm.org/D129635
(cherry picked from commit 9dd2999907dc791136a75238a6000f69bf67cf4e)
|
|
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D150608
|
|
This adds -no-opaque-pointers to clang tests whose output will
change when opaque pointers are enabled by default. This is
intended to be part of the migration approach described in
https://discourse.llvm.org/t/enabling-opaque-pointers-by-default/61322/9.
The patch has been produced by replacing %clang_cc1 with
%clang_cc1 -no-opaque-pointers for tests that fail with opaque
pointers enabled. Worth noting that this doesn't cover all tests,
there's a remaining ~40 tests not using %clang_cc1 that will need
a followup change.
Differential Revision: https://reviews.llvm.org/D123115
|
|
turn it off by default
Turning on `enable_noundef_analysis` flag allows better codegen by removing freeze instructions.
I modified clang by renaming `enable_noundef_analysis` flag to `disable-noundef-analysis` and turning it off by default.
Test updates are made as a separate patch: D108453
Reviewed By: eugenis
Differential Revision: https://reviews.llvm.org/D105169
|
|
disable-noundef-analysis and turn it off by default"
This reverts commit aacfbb953eb705af2ecfeb95a6262818fa85dd92.
Revert "Fix lit test failures in CodeGenCoroutines"
This reverts commit 63fff0f5bffe20fa2c84a45a41161afa0043cb34.
|
|
turn it off by default
Turning on `enable_noundef_analysis` flag allows better codegen by removing freeze instructions.
I modified clang by renaming `enable_noundef_analysis` flag to `disable-noundef-analysis` and turning it off by default.
Test updates are made as a separate patch: D108453
Reviewed By: eugenis
Differential Revision: https://reviews.llvm.org/D105169
[Clang/Test]: Rename enable_noundef_analysis to disable-noundef-analysis and turn it off by default (2)
This patch updates test files after D105169.
Autogenerated test codes are changed by `utils/update_cc_test_checks.py,` and non-autogenerated test codes are changed as follows:
(1) I wrote a python script that (partially) updates the tests using regex: {F18594904} The script is not perfect, but I believe it gives hints about which patterns are updated to have `noundef` attached.
(2) The remaining tests are updated manually.
Reviewed By: eugenis
Differential Revision: https://reviews.llvm.org/D108453
Resolve lit failures in clang after 8ca4b3e's land
Fix lit test failures in clang-ppc* and clang-x64-windows-msvc
Fix missing failures in clang-ppc64be* and retry fixing clang-x64-windows-msvc
Fix internal_clone(aarch64) inline assembly
|
|
disable-noundef-analysis and turn it off by default"
This reverts commit 7584ef766a7219b6ee5a400637206d26e0fa98ac.
|
|
turn it off by default
Turning on `enable_noundef_analysis` flag allows better codegen by removing freeze instructions.
I modified clang by renaming `enable_noundef_analysis` flag to `disable-noundef-analysis` and turning it off by default.
Test updates are made as a separate patch: D108453
Reviewed By: eugenis
Differential Revision: https://reviews.llvm.org/D105169
|
|
This reverts the following commits:
37ca7a795b277c20c02a218bf44052278c03344b
9aa6c72b92b6c89cc6d23b693257df9af7de2d15
705387c5074bcca36d626882462ebbc2bcc3bed4
8ca4b3ef19fe82d7ad6a6e1515317dcc01b41515
80dba72a669b5416e97a42fd2c2a7bc5a6d3f44a
|
|
turn it off by default (2)
This patch updates test files after D105169.
Autogenerated test codes are changed by `utils/update_cc_test_checks.py,` and non-autogenerated test codes are changed as follows:
(1) I wrote a python script that (partially) updates the tests using regex: {F18594904} The script is not perfect, but I believe it gives hints about which patterns are updated to have `noundef` attached.
(2) The remaining tests are updated manually.
Reviewed By: eugenis
Differential Revision: https://reviews.llvm.org/D108453
|
|
Avoid copying of the orignal variable if it is going to be marked as
firstprivate in task regions. For taskloops, still need to copy the
non-trvially copyable variables to correctly construct them upon task
creation.
|
|
directive.
According to OpenMP 5.0, the `if` clause can be applied to simd
subdirective in the combined directive.
|
|
llvm.mem.parallel_loop_access metadata.
Instead of generating llvm.mem.parallel_loop_access metadata, generate
llvm.access.group on instructions and llvm.loop.parallel_accesses on
loops. There is one access group per generated loop.
This is clang part of D52116/r349725.
Differential Revision: https://reviews.llvm.org/D52117
llvm-svn: 349823
|
|
function
Summary:
For the following code:
```
int i;
#pragma omp taskloop
for (i = 0; i < 100; ++i)
{}
#pragma omp taskloop nogroup
for (i = 0; i < 100; ++i)
{}
```
Clang emits the following LLVM IR:
```
...
call void @__kmpc_taskgroup(%struct.ident_t* @0, i32 %0)
%2 = call i8* @__kmpc_omp_task_alloc(%struct.ident_t* @0, i32 %0, i32 1, i64 80, i64 8, i32 (i32, i8*)* bitcast (i32 (i32, %struct.kmp_task_t_with_privates*)* @.omp_task_entry. to i32 (i32, i8*)*))
...
call void @__kmpc_taskloop(%struct.ident_t* @0, i32 %0, i8* %2, i32 1, i64* %8, i64* %9, i64 %13, i32 0, i32 0, i64 0, i8* null)
call void @__kmpc_end_taskgroup(%struct.ident_t* @0, i32 %0)
...
%15 = call i8* @__kmpc_omp_task_alloc(%struct.ident_t* @0, i32 %0, i32 1, i64 80, i64 8, i32 (i32, i8*)* bitcast (i32 (i32, %struct.kmp_task_t_with_privates.1*)* @.omp_task_entry..2 to i32 (i32, i8*)*))
...
call void @__kmpc_taskloop(%struct.ident_t* @0, i32 %0, i8* %15, i32 1, i64* %21, i64* %22, i64 %26, i32 0, i32 0, i64 0, i8* null)
```
The first set of instructions corresponds to the first taskloop construct. It is important to note that the implicit taskgroup region associated with the taskloop construct has been materialized in our IR: the `__kmpc_taskloop` occurs inside a taskgroup region. Note also that this taskgroup region does not exist in our second taskloop because we are using the `nogroup` clause.
The issue here is the 4th argument of the kmpc_taskloop call, starting from the end, is always a zero. Checking the LLVM OpenMP RT implementation, we see that this argument corresponds to the nogroup parameter:
```
void __kmpc_taskloop(ident_t *loc, int gtid, kmp_task_t *task, int if_val,
kmp_uint64 *lb, kmp_uint64 *ub, kmp_int64 st, int nogroup,
int sched, kmp_uint64 grainsize, void *task_dup);
```
So basically we always tell to the RT to do another taskgroup region. For the first taskloop, this means that we create two taskgroup regions. For the second example, it means that despite the fact we had a nogroup clause we are going to have a taskgroup region, so we unnecessary wait until all descendant tasks have been executed.
Reviewers: ABataev
Reviewed By: ABataev
Subscribers: rogfer01, cfe-commits
Differential Revision: https://reviews.llvm.org/D53636
llvm-svn: 345180
|
|
llvm-svn: 330140
|
|
only.
Added support for -fopenmp-simd option that allows compilation of
simd-based constructs without emission of OpenMP runtime calls.
llvm-svn: 321560
|
|
Added missed checks/analysis for safelen/simdlen clauses + linear clause
in for [simd] based directives.
llvm-svn: 318860
|
|
Adds codegen for taskloop-based directives.
llvm-svn: 308174
|
|
If taskloop directive has no associated nogroup clause, it must emitted
inside implicit taskgroup block. Runtime supports it, but we need to
generate implicit taskgroup block explicitly to support future
reductions codegen.
llvm-svn: 307822
|
|
Clang can generate LLVM IR for x86 without a registered x86 backend.
llvm-svn: 284836
|
|
directives.
'kmp_task_t' record type added a new field for 'priority' clause and
changed the representation of pointer to destructors for privates used
within loop-based directives.
Old representation:
typedef struct kmp_task { /* GEH: Shouldn't this be
aligned somehow? */
void *shareds; /**< pointer to block of
pointers to shared vars */
kmp_routine_entry_t routine; /**< pointer to routine
to call for executing task */
kmp_int32 part_id; /**< part id for the
task */
kmp_routine_entry_t destructors; /* pointer to function to
invoke deconstructors of firstprivate C++ objects */
/* private vars */
} kmp_task_t;
New representation:
typedef struct kmp_task { /* GEH: Shouldn't this be
aligned somehow? */
void *shareds; /**< pointer to block of
pointers to shared vars */
kmp_routine_entry_t routine; /**< pointer to routine
to call for executing task */
kmp_int32 part_id; /**< part id for the
task */
kmp_cmplrdata_t data1; /* Two known
optional additions: destructors and priority */
kmp_cmplrdata_t data2; /* Process
destructors first, priority second */
/* future data */
/* private vars */
} kmp_task_t;
Also excessive initialization of 'destructors' fields to 'null' was
removed from codegen if it is known that no destructors shal be used.
Currently a special bit is used in 'kmp_tasking_flags_t' bitfields
('destructors_thunk' bitfield).
llvm-svn: 271201
|
|
directives.
OpenMP 4.5 supports clause 'priority' in task-based directives. Patch
adds initial codegen support for this clause in codegen.
llvm-svn: 269050
|
|
If private variables require destructors call at the deletion of the
task, additional flag in task flags must be set. Patch fixes this
problem.
llvm-svn: 269039
|
|
OpenMP 4.5 defines 'taskloop simd' directive, which is combined
directive for 'taskloop' and 'simd' directives. Patch adds initial
codegen support for this directive and its 2 basic clauses 'safelen' and
'simdlen'.
llvm-svn: 267872
|
