summaryrefslogtreecommitdiff
path: root/zlib
AgeCommit message (Collapse)Author
2025-11-04Daily bump.GCC Administrator
2025-11-03gcc: sync top-level with binutils-gdbSam James
This just pulls in Alan's: commit 87b6078fc212ccba5f043399c6370ee20f6b355a Author: Alan Modra <amodra@gmail.com> AuthorDate: Mon Nov 3 10:59:50 2025 +1030 Commit: Alan Modra <amodra@gmail.com> CommitDate: Mon Nov 3 10:59:50 2025 +1030 tidy m4 plugin config support ... It tidies up the configure test output. config/ChangeLog: * clang-plugin.m4: Sync with binutils. * gcc-plugin.m4: Ditto. ChangeLog: * configure: Regenerate. gcc/ChangeLog: * configure: Regenerate. libatomic/ChangeLog: * configure: Regenerate. libbacktrace/ChangeLog: * configure: Regenerate. libcc1/ChangeLog: * configure: Regenerate. libffi/ChangeLog: * configure: Regenerate. libgcobol/ChangeLog: * configure: Regenerate. libgfortran/ChangeLog: * configure: Regenerate. libgm2/ChangeLog: * configure: Regenerate. libgomp/ChangeLog: * configure: Regenerate. libgrust/ChangeLog: * configure: Regenerate. libiberty/ChangeLog: * configure: Regenerate. libitm/ChangeLog: * configure: Regenerate. libobjc/ChangeLog: * configure: Regenerate. libphobos/ChangeLog: * configure: Regenerate. libquadmath/ChangeLog: * configure: Regenerate. libsanitizer/ChangeLog: * configure: Regenerate. libssp/ChangeLog: * configure: Regenerate. libstdc++-v3/ChangeLog: * configure: Regenerate. libvtv/ChangeLog: * configure: Regenerate. lto-plugin/ChangeLog: * configure: Regenerate. zlib/ChangeLog: * configure: Regenerate.
2025-10-05Daily bump.GCC Administrator
2025-10-02Sync toplevel files from binutils-gdbH.J. Lu
commit aef88b83384976e96a8fb287a001588a2277ecd5 Author: H.J. Lu <hjl.tools@gmail.com> Date: Thu Oct 2 08:53:45 2025 +0800 binutils/GCC: Quote ${COMPILER_FOR_TARGET} Replace if test x${COMPILER_FOR_TARGET} = x"\$(CC)"; then with if test x"${COMPILER_FOR_TARGET}" = x"\$(CC)"; then since COMPILER_FOR_TARGET may contain spaces when configuring GCC. commit 76a693c087c30e8108852928c717399011c6166d Author: H.J. Lu <hjl.tools@gmail.com> Date: Tue Sep 30 11:23:58 2025 +0800 binutils: Use AC_TRY_COMPILE to check target clang/gcc Use AC_TRY_COMPILE to check for the working target clang and gcc when configuring for cross tools. commit 77c74294bfc5005204a2de3cc64bbdb2f877be29 Author: H.J. Lu <hjl.tools@gmail.com> Date: Fri Sep 26 08:03:01 2025 +0800 binutils: Pass target plugin file to target ar/nm/ranlib There are 2 kinds of binutils tests: 1. Tests of binutils object files and libraries using the build tools, like CC, AR, NM and RANLIB. 2. Tests of binutils programs as the target tools, like CC_FOR_TARGET, AR_FOR_TARGET, NM_FOR_TARGET and RANLIB_FOR_TARGET. Set AR_PLUGIN_OPTION_FOR_TARGET, NM_PLUGIN_OPTION_FOR_TARGET and RANLIB_PLUGIN_OPTION_FOR_TARGET to the target compiler plugin file for target ar/nm/ranlib. commit 10deea6e2fc1b9ec5818b5fa1bc510c63ff5b2e2 Author: H.J. Lu <hjl.tools@gmail.com> Date: Tue Sep 23 04:24:00 2025 +0800 Binutils/GCC: Add clang LTO support to AR, NM and RANLIB Add CLANG_PLUGIN_FILE to find the clang plugin file and pass it to --plugin for ar, nm and ranlib so that binutils can be built with clang LTO. Run CLANG_PLUGIN_FILE before GCC_PLUGIN_OPTION since GCC_PLUGIN_OPTION may return the wrong PLUGIN_OPTION with clang. commit 1fcb94ed750db2ac30d0f0ecc04fa0c7833dd10f Author: Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE> Date: Thu Sep 18 16:17:14 2025 +0200 Remove remnants of Solaris/PowerPC support When removing Solaris/PowerPC support, I missed a couple of references. This patch removes them. Tested with crosses to ppc-unknown-linux-gnu and powerpc-ibm-aix7. ChangeLog: * Makefile.in: Regenerated. * configure: Likewise. * Makefile.tpl: Synced from binutils-gdb. * configure.ac: Likewise. * libtool.m4: Likewise. config/ChangeLog: * clang-plugin.m4: Synced from binutils-gdb. * gcc-plugin.m4: Likewise. libbacktrace/ChangeLog: * Makefile.in: Regenerated. * aclocal.m4: Likewise. * configure: Likewise. libiberty/ChangeLog: * aclocal.m4: Regenerated. * configure: Likewise. * configure.ac: Synced from binutils-gdb. zlib/ChangeLog: * Makefile.in: Regenerated. * aclocal.m4: Likewise. * configure: Likewise. Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
2025-10-02Sync toplevel files from binutils-gdbH.J. Lu
commit 28ea7ae220a0343ff7fe531ec761bd77d00dcb1c Author: Matthieu Longo <matthieu.longo@arm.com> Date: Tue May 28 10:49:45 2024 +0100 autoupdate: replace old version of AC_INIT by the new one - old AC_INIT by AC_INIT + AC_CONFIG_SRC_DIR https://www.gnu.org/savannah-checkouts/gnu/autoconf/manual/autoconf-2.72/autoconf.html#index-AC_005fINIT-3 commit 29496481662736f0a24bfc1daf31dbfc9d2bb7ee Author: Matthieu Longo <matthieu.longo@arm.com> Date: Tue May 28 10:49:43 2024 +0100 autoupdate: replace obsolete macros AC_CANONICAL_SYSTEM - AC_CANONICAL_SYSTEM by: * AC_CANONICAL_HOST where host, and host_alias are needed * AC_CANONICAL_TARGET where target_alias is needed https://www.gnu.org/savannah-checkouts/gnu/autoconf/manual/autoconf-2.72/autoconf.html#index-AC_005fCANONICAL_005fTARGET-1 commit d9639e091c77689b10363ecb197466deaa161ade Author: Maciej W. Rozycki <macro@redhat.com> Date: Mon Apr 28 18:53:30 2025 +0100 Fix 64-bit BFD detection causing build failures We have a discrepancy with 64-bit BFD handling across our component subdirectories leading to link failures such as: ld: ../opcodes/.libs/libopcodes.a(disassemble.o): in function `disassembler': disassemble.c:(.text+0x65): undefined reference to `print_insn_alpha' ld: disassemble.c:(.text+0x105): undefined reference to `print_insn_ia64' ld: disassemble.c:(.text+0x11d): undefined reference to `print_insn_loongarch' ld: disassemble.c:(.text+0x1a1): undefined reference to `print_insn_big_mips' [...] with some configurations having a 32-bit host and 64-bit BFD, such as: `--host=i386-linux-gnu --target=riscv64-linux-gnu --enable-targets=all'. This is ultimately due to how 64-bit BFD is enabled for bfd/ itself and other subdirectorses and has been a regression from commit 1d5269c994bf ("unify 64-bit bfd checks"). For bfd/ the BFD_64_BIT autoconf macro from config/bfd64.m4 is used combined with this logic in bfd/configure.ac: case ${host64}-${target64}-${want64} in *true*) wordsize=64 bfd64_libs='$(BFD64_LIBS)' all_backends='$(BFD64_BACKENDS) $(BFD32_BACKENDS)' [...] ;; false-false-false) wordsize=32 all_backends='$(BFD32_BACKENDS)' ;; esac where the value of ${wordsize} switches between 32-bit and 64-bit BFD via these pieces: #define BFD_ARCH_SIZE @wordsize@ and: #if BFD_ARCH_SIZE >= 64 #define BFD64 #endif in bfd/bfd-in.h, which ultimately becomes a part of "bfd.h". Then ${host64} is determined in bfd/configure.ac from the host's word size, via the host's pointer size: if test "x${ac_cv_sizeof_void_p}" = "x8"; then host64=true fi And ${target64} is determined in bfd/configure.ac from the target's word size: if test ${target_size} = 64; then target64=true fi Where multiple targets have been requested with `--enable-targets=all' the presence of any 64-bit target will set "true" here. Finally ${want64} is set according to `--enable-64-bit-bfd' user option with an arrangement involving BFD_64_BIT: BFD_64_BIT if test $enable_64_bit_bfd = yes ; then want64=true else want64=false fi which also, redundantly, checks and sets its result upon the host's word size. Lastly ${want64} is also selectively set by target fragments in bfd/config.bfd, which mostly if not completely overlaps with ${target64} setting as described above. Conversely other subdirectories only rely on BFD_64_BIT, so they fail to notice that BFD is 64-bit and do not enable their 64-bit handling where the host requested is 32-bit and 64-bit BFD has been enabled other than with `--enable-64-bit-bfd'. One consequence is opcodes/disassemble.c enables calls to its numerous own 64-bit backends by checking the BFD64 macro from "bfd.h", however does not actually enable said backends in its Makefile. Hence the link errors quoted above. Address the problem then by moving the `--enable-64-bit-bfd' option back to bfd/configure.ac and remove the call to BFD_64_BIT from there and then rewrite the macro in terms of checking for the presence of BFD64 macro in "bfd.h", which is the canonical way of determining whether BFD is 64-bit or not. Rather than running `grep' directly on ../bfd/bfd-in3.h as the opcodes/ fragment used to before the problematic commit: if grep '#define BFD_ARCH_SIZE 64' ../bfd/bfd-in3.h > /dev/null; then run the preprocessor on "bfd.h", which allows to invoke the macro from configure.ac files placed in subdirectories located at deeper levels, by relying on the preprocessor's search path. This requires however that the invokers rely on `all-bfd' rather than `configure-bfd' for their `configure' invocation stage, because "bfd.h" is made by `make all' rather than `configure' in bfd/. Do not cache the result of this check however, as reconfiguring a tree such as to flip `--enable-64-bit-bfd' on or to change a secondary target may affect BFD64 and we have no access to information about secondary targets in BFD_64_BIT. Also remove the ENABLE_BFD_64_BIT automake conditional, as it's not used anywhere. Last but not least remove the hack from gdb/configure.ac to fail builds for `mips*-*-*' hosts where `--enable-targets=all' has been requested, but `--enable-64-bit-bfd' has not as it's no longer needed. Such builds complete successfully now, having enabled 64-bit BFD implicitly. Tested-By: Guinevere Larsen <guinevere@redhat.com> Tested-By: Luis Machado <luis.machado@arm.com> Approved-By: Alan Modra <amodra@gmail.com> Approved-By: Luis Machado <luis.machado@arm.com> * Makefile.def: Synced from binutils-gdb. * Makefile.in: Regenerated. commit 319719bb2921e978738acd408e6b16dabf0e7f5e Author: Tom Tromey <tom@tromey.com> Date: Thu Mar 21 17:12:23 2024 -0600 Revert "Pass GUILE down to subdirectories" This reverts commit b7e5a29602143b53267efcd9c8d5ecc78cd5a62f. This patch caused problems for some users when building gdb, because it would cause 'guild' to be invoked with the wrong versin of guile. On the whole it seems simpler to just back this out. I'm checking this in to the binutils-gdb repository in the interest of fixing the build for Andrew. No one has responded to the identical patch sent to gcc-patches, but I will ping it there. commit da48217f315084097ef25226c0acab3bbd55ebd3 Author: Simon Marchi <simon.marchi@efficios.com> Date: Thu Mar 14 13:39:18 2024 -0400 gdbserver/linux: probe for libiconv in configure Make gdbserver's build system locate libiconv when building for Linux. Commit 07b3255c3bae ("Filter invalid encodings from Linux thread names") make libiconv madantory for building gdbserver on Linux. While trying to cross-compile gdb for xtensa-fsf-linux-uclibc (with a toolchain generated with crosstool-ng), I got: /home/smarchi/src/binutils-gdb/gdbserver/linux-low.cc:48:10: fatal error: iconv.h: No such file or directory 48 | #include <iconv.h> | ^~~~~~~~~ I downloaded GNU libiconv, built it for that host, and installed it in an arbitrary directory. I had to modify the gdbserver build system to locate libiconv and use it, the result is this patch. I eventually found that crosstool-ng has a config option to make uclibc provide an implementation of iconv, which is of course much easier. But given that this patch is now written, I think it would be worth merging it, it could help some people who do not have iconv built-in their libc in the future (and may not have the luxury of rebuilding their libc like I do). Using AM_ICONV in configure.ac adds these options for configure (the same we have for gdb): --with-libiconv-prefix[=DIR] search for libiconv in DIR/include and DIR/lib --without-libiconv-prefix don't search for libiconv in includedir and libdir --with-libiconv-type=TYPE type of library to search for (auto/static/shared) It sets the `LIBICONV` variable with whatever is needed to link with libiconv, and adds the necessary `-I` flag to `CPPFLAGS`. To avoid unnecessarily linking against libiconv on hosts that don't need it, set `MAYBE_LIBICONV` with the contents of `LIBICONV` only if the host is Linux, and use `MAYBE_LIBICONV` in `Makefile.in`. Since libiconv is a hard requirement for Linux hosts, error out if it is not found. The bits in acinclude.m4 are similar to what we have in gdb/acinclude.m4. Update the top-level build system to support building against an in-tree libiconv (I did not test this part though). Something tells me that the all-gdbserver dependency on all-libiconv is unnecessary, since there is already a dependency of configure-gdbserver on all-libiconv (and all-gdbserver surely depends on configure-gdbserver). I just copied what's done for GDB though. * Makefile.def: Synced from binutils-gdb. * Makefile.tpl: Likewise. * configure.ac: Likewise. * Makefile.in: Regenerated. * configure: Likewise. config/ * acx.m4: Synced from binutils-gdb. * lthostflags.m4: Likewise. libbacktrace/ * configure.ac: Synced from binutils-gdb. * configure: Regenerated. zlib/ * configure.ac: Synced from binutils-gdb. * configure: Regenerated. Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
2025-08-01Daily bump.GCC Administrator
2025-07-31zlib: refresh version in configureSam James
zlib/ChangeLog: * configure: Regenerate. * configure.ac: Set version to 1.3.1.
2025-07-31zlib: update ChangeLogSam James
zlib/ChangeLog: PR other/105404 * Import zlib-1.3.1
2025-07-31zlib: import zlib-1.3.1Sam James
This is vanilla zlib-1.3.1 imported over the existing zlib/ dir with: * README adjusted to add the GCC note at the top; * GCC's ChangeLog merged with the upstream one, as before; * Deleted upstream Makefile as has been done before (we use an autoconf- generated one)
2023-10-23Daily bump.GCC Administrator
2023-10-22Config,Darwin: Allow for configuring Darwin to use embedded runpath.Iain Sandoe
Recent Darwin versions place contraints on the use of run paths specified in environment variables. This breaks some assumptions in the GCC build. This change allows the user to configure a Darwin build to use '@rpath/libraryname.dylib' in library names and then to add an embedded runpath to executables (and libraries with dependents). The embedded runpath is added by default unless the user adds '-nodefaultrpaths' to the link line. For an installed compiler, it means that any executable built with that compiler will reference the runtimes installed with the compiler (equivalent to hard-coding the library path into the name of the library). During build-time configurations any "-B" entries will be added to the runpath thus the newly-built libraries will be found by exes. Since the install name is set in libtool, that decision needs to be available here (but might also cause dependent ones in Makefiles, so we need to export a conditional). This facility is not available for Darwin 8 or earlier, however the existing environment variable runpath does work there. We default this on for systems where the external DYLD_LIBRARY_PATH does not work and off for Darwin 8 or earlier. For systems that can use either method, if the value is unset, we use the default (which is currently DYLD_LIBRARY_PATH). ChangeLog: * configure: Regenerate. * configure.ac: Do not add default runpaths to GCC exes when we are building -static-libstdc++/-static-libgcc (the default). * libtool.m4: Add 'enable-darwin-at-runpath'. Act on the enable flag to alter Darwin libraries to use @rpath names. gcc/ChangeLog: * aclocal.m4: Regenerate. * configure: Regenerate. * configure.ac: Handle Darwin rpaths. * config/darwin.h: Handle Darwin rpaths. * config/darwin.opt: Handle Darwin rpaths. * Makefile.in: Handle Darwin rpaths. gcc/ada/ChangeLog: * gcc-interface/Makefile.in: Handle Darwin rpaths. gcc/jit/ChangeLog: * Make-lang.in: Handle Darwin rpaths. libatomic/ChangeLog: * Makefile.am: Handle Darwin rpaths. * Makefile.in: Regenerate. * configure: Regenerate. * configure.ac: Handle Darwin rpaths. libbacktrace/ChangeLog: * configure: Regenerate. * configure.ac: Handle Darwin rpaths. libcc1/ChangeLog: * configure: Regenerate. libffi/ChangeLog: * Makefile.am: Handle Darwin rpaths. * Makefile.in: Regenerate. * configure: Regenerate. libgcc/ChangeLog: * config/t-slibgcc-darwin: Generate libgcc_s with an @rpath name. * config.host: Handle Darwin rpaths. libgfortran/ChangeLog: * Makefile.am: Handle Darwin rpaths. * Makefile.in: Regenerate. * configure: Regenerate. * configure.ac: Handle Darwin rpaths libgm2/ChangeLog: * Makefile.am: Handle Darwin rpaths. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate. * configure.ac: Handle Darwin rpaths. * libm2cor/Makefile.am: Handle Darwin rpaths. * libm2cor/Makefile.in: Regenerate. * libm2iso/Makefile.am: Handle Darwin rpaths. * libm2iso/Makefile.in: Regenerate. * libm2log/Makefile.am: Handle Darwin rpaths. * libm2log/Makefile.in: Regenerate. * libm2min/Makefile.am: Handle Darwin rpaths. * libm2min/Makefile.in: Regenerate. * libm2pim/Makefile.am: Handle Darwin rpaths. * libm2pim/Makefile.in: Regenerate. libgomp/ChangeLog: * Makefile.am: Handle Darwin rpaths. * Makefile.in: Regenerate. * configure: Regenerate. * configure.ac: Handle Darwin rpaths libitm/ChangeLog: * Makefile.am: Handle Darwin rpaths. * Makefile.in: Regenerate. * configure: Regenerate. * configure.ac: Handle Darwin rpaths. libobjc/ChangeLog: * configure: Regenerate. * configure.ac: Handle Darwin rpaths. libphobos/ChangeLog: * configure: Regenerate. * configure.ac: Handle Darwin rpaths. * libdruntime/Makefile.am: Handle Darwin rpaths. * libdruntime/Makefile.in: Regenerate. * src/Makefile.am: Handle Darwin rpaths. * src/Makefile.in: Regenerate. libquadmath/ChangeLog: * Makefile.am: Handle Darwin rpaths. * Makefile.in: Regenerate. * configure: Regenerate. * configure.ac: Handle Darwin rpaths. libsanitizer/ChangeLog: * asan/Makefile.am: Handle Darwin rpaths. * asan/Makefile.in: Regenerate. * configure: Regenerate. * hwasan/Makefile.am: Handle Darwin rpaths. * hwasan/Makefile.in: Regenerate. * lsan/Makefile.am: Handle Darwin rpaths. * lsan/Makefile.in: Regenerate. * tsan/Makefile.am: Handle Darwin rpaths. * tsan/Makefile.in: Regenerate. * ubsan/Makefile.am: Handle Darwin rpaths. * ubsan/Makefile.in: Regenerate. libssp/ChangeLog: * Makefile.am: Handle Darwin rpaths. * Makefile.in: Regenerate. * configure: Regenerate. * configure.ac: Handle Darwin rpaths. libstdc++-v3/ChangeLog: * configure: Regenerate. * configure.ac: Handle Darwin rpaths. * src/Makefile.am: Handle Darwin rpaths. * src/Makefile.in: Regenerate. libvtv/ChangeLog: * configure: Regenerate. * configure.ac: Handle Darwin rpaths. lto-plugin/ChangeLog: * configure: Regenerate. * configure.ac: Handle Darwin rpaths. zlib/ChangeLog: * configure: Regenerate. * configure.ac: Handle Darwin rpaths.
2023-08-08Daily bump.GCC Administrator
2023-08-07libtool.m4: augment symcode for Solaris 11Nick Alcock
This reports common symbols like GNU nm, via a type code of 'C'. ChangeLog: * libtool.m4 (lt_cv_sys_global_symbol_pipe): Augment symcode for Solaris 11. gcc/ChangeLog: * configure: Regenerate. libatomic/ChangeLog: * configure: Regenerate. libbacktrace/ChangeLog: * configure: Regenerate. libcc1/ChangeLog: * configure: Regenerate. libffi/ChangeLog: * configure: Regenerate. libgfortran/ChangeLog: * configure: Regenerate. libgm2/ChangeLog: * configure: Regenerate. libgomp/ChangeLog: * configure: Regenerate. libitm/ChangeLog: * configure: Regenerate. libobjc/ChangeLog: * configure: Regenerate. libphobos/ChangeLog: * configure: Regenerate. libquadmath/ChangeLog: * configure: Regenerate. libsanitizer/ChangeLog: * configure: Regenerate. libssp/ChangeLog: * configure: Regenerate. libstdc++-v3/ChangeLog: * configure: Regenerate. libvtv/ChangeLog: * configure: Regenerate. lto-plugin/ChangeLog: * configure: Regenerate. zlib/ChangeLog: * configure: Regenerate.
2023-08-07Add support for the haiku operating systemAlexander von Gluck IV
These are the os support patches we have been grooming and maintaining for quite a few years over on git.haiku-os.org. All of these architectures are working and most have been stable for quite some time. ChangeLog: * configure: Regenerate. * configure.ac: Add Haiku to list of ELF OSes * libtool.m4: Update sys_lib_dlsearch_path_spec on Haiku. gcc/ChangeLog: * configure: Regenerate. libatomic/ChangeLog: * configure: Regenerate. libbacktrace/ChangeLog: * configure: Regenerate. libcc1/ChangeLog: * configure: Regenerate. libffi/ChangeLog: * configure: Regenerate. libgfortran/ChangeLog: * configure: Regenerate. libgm2/ChangeLog: * configure: Regenerate. libgomp/ChangeLog: * configure: Regenerate. libitm/ChangeLog: * configure: Regenerate. libobjc/ChangeLog: * configure: Regenerate. libphobos/ChangeLog: * configure: Regenerate. libquadmath/ChangeLog: * configure: Regenerate. libsanitizer/ChangeLog: * configure: Regenerate. libssp/ChangeLog: * configure: Regenerate. libstdc++-v3/ChangeLog: * configure: Regenerate. libvtv/ChangeLog: * configure: Regenerate. lto-plugin/ChangeLog: * configure: Regenerate. zlib/ChangeLog: * configure: Regenerate.
2023-08-07libtool.m4: fix the NM="/nm/over/here -B/option/with/path" caseNick Alcock
My previous nm patch handled all cases but one -- if the user set NM in the environment to a path which contained an option, libtool's nm detection tries to run nm against a copy of nm with the options in it: e.g. if NM was set to "nm --blargle", and nm was found in /usr/bin, the test would try to run "/usr/bin/nm --blargle /usr/bin/nm --blargle". This is unlikely to be desirable: in this case we should run "/usr/bin/nm --blargle /usr/bin/nm". Furthermore, as part of this nm has to detect when the passed-in $NM contains a path, and in that case avoid doing a path search itself. This too was thrown off if an option contained something that looked like a path, e.g. NM="nm -B../prev-gcc"; libtool then tries to run "nm -B../prev-gcc nm" which rarely works well (and indeed it looks to see whether that nm exists, finds it doesn't, and wrongly concludes that nm -p or whatever does not work). Fix all of these by clipping all options (defined as everything including and after the first " -") before deciding whether nm contains a path (but not using the clipped value for anything else), and then removing all options from the path-modified nm before looking to see whether that nm existed. NM=my-nm now does a path search and runs e.g. /usr/bin/my-nm -B /usr/bin/my-nm NM=/usr/bin/my-nm now avoids a path search and runs e.g. /usr/bin/my-nm -B /usr/bin/my-nm NM="my-nm -p../wombat" now does a path search and runs e.g. /usr/bin/my-nm -p../wombat -B /usr/bin/my-nm NM="../prev-binutils/new-nm -B../prev-gcc" now avoids a path search: ../prev-binutils/my-nm -B../prev-gcc -B ../prev-binutils/my-nm This seems to be all combinations, including those used by GCC bootstrap (which, before this commit, fails to bootstrap when configured --with-build-config=bootstrap-lto, because the lto plugin is now using --export-symbols-regex, which requires libtool to find a working nm, while also using -B../prev-gcc to point at the lto plugin associated with the GCC just built.) Regenerate all affected configure scripts. ChangeLog: * libtool.m4 (LT_PATH_NM): Handle user-specified NM with options, including options containing paths. gcc/ChangeLog: * configure: Regenerate. libatomic/ChangeLog: * configure: Regenerate. libbacktrace/ChangeLog: * configure: Regenerate. libcc1/ChangeLog: * configure: Regenerate. libffi/ChangeLog: * configure: Regenerate. libgfortran/ChangeLog: * configure: Regenerate. libgm2/ChangeLog: * configure: Regenerate. libgomp/ChangeLog: * configure: Regenerate. libitm/ChangeLog: * configure: Regenerate. libobjc/ChangeLog: * configure: Regenerate. libphobos/ChangeLog: * configure: Regenerate. libquadmath/ChangeLog: * configure: Regenerate. libsanitizer/ChangeLog: * configure: Regenerate. libssp/ChangeLog: * configure: Regenerate. libstdc++-v3/ChangeLog: * configure: Regenerate. libvtv/ChangeLog: * configure: Regenerate. lto-plugin/ChangeLog: * configure: Regenerate. zlib/ChangeLog: * configure: Regenerate.
2023-08-07libtool.m4: fix nm BSD flag detectionNick Alcock
Libtool needs to get BSD-format (or MS-format) output out of the system nm, so that it can scan generated object files for symbol names for -export-symbols-regex support. Some nms need specific flags to turn on BSD-formatted output, so libtool checks for this in its AC_PATH_NM. Unfortunately the code to do this has a pair of interlocking flaws: - it runs the test by doing an nm of /dev/null. Some platforms reasonably refuse to do an nm on a device file, but before now this has only been worked around by assuming that the error message has a specific textual form emitted by Tru64 nm, and that getting this error means this is Tru64 nm and that nm -B would work to produce BSD-format output, even though the test never actually got anything but an error message out of nm -B. This is fixable by nm'ing *nm itself* (since we necessarily have a path to it). - the test is entirely skipped if NM is set in the environment, on the grounds that the user has overridden the test: but the user cannot reasonably be expected to know that libtool wants not only nm but also flags forcing BSD-format output. Worse yet, one such "user" is the top-level Cygnus configure script, which neither tests for nor specifies any BSD-format flags. So platforms needing BSD-format flags always fail to set them when run in a Cygnus tree, breaking -export-symbols-regex on such platforms. Libtool also needs to augment $LD on some platforms, but this is done unconditionally, augmenting whatever the user specified: the nm check should do the same. One wrinkle: if the user has overridden $NM, a path might have been provided: so we use the user-specified path if there was one, and otherwise do the path search as usual. (If the nm specified doesn't work, this might lead to a few extra pointless path searches -- but the test is going to fail anyway, so that's not a problem.) (Tested with NM unset, and set to nm, /usr/bin/nm, my-nm where my-nm is a symlink to /usr/bin/nm on the PATH, and /not-on-the-path/my-nm where *that* is a symlink to /usr/bin/nm.) ChangeLog: * libtool.m4 (LT_PATH_NM): Try BSDization flags with a user-provided NM, if there is one. Run nm on itself, not on /dev/null, to avoid errors from nms that refuse to work on non-regular files. Remove other workarounds for this problem. Strip out blank lines from the nm output. fixincludes/ChangeLog: * configure: Regenerate. gcc/ChangeLog: * configure: Regenerate. libatomic/ChangeLog: * configure: Regenerate. libbacktrace/ChangeLog: * configure: Regenerate. libcc1/ChangeLog: * configure: Regenerate. libffi/ChangeLog: * configure: Regenerate. libgfortran/ChangeLog: * configure: Regenerate. libgm2/ChangeLog: * configure: Regenerate. libgomp/ChangeLog: * configure: Regenerate. libitm/ChangeLog: * configure: Regenerate. libobjc/ChangeLog: * configure: Regenerate. libphobos/ChangeLog: * configure: Regenerate. libquadmath/ChangeLog: * configure: Regenerate. libsanitizer/ChangeLog: * configure: Regenerate. libssp/ChangeLog: * configure: Regenerate. libstdc++-v3/ChangeLog: * configure: Regenerate. libvtv/ChangeLog: * configure: Regenerate. lto-plugin/ChangeLog: * configure: Regenerate. zlib/ChangeLog: * configure: Regenerate.
2023-08-07GCC: Check if AR works with --plugin and rcH.J. Lu
AR from older binutils doesn't work with --plugin and rc: [hjl@gnu-cfl-2 bin]$ touch foo.c [hjl@gnu-cfl-2 bin]$ ar --plugin /usr/libexec/gcc/x86_64-redhat-linux/10/liblto_plugin.so rc libfoo.a foo.c [hjl@gnu-cfl-2 bin]$ ./ar --plugin /usr/libexec/gcc/x86_64-redhat-linux/10/liblto_plugin.so rc libfoo.a foo.c ./ar: no operation specified [hjl@gnu-cfl-2 bin]$ ./ar --version GNU ar (Linux/GNU Binutils) 2.29.51.0.1.20180112 Copyright (C) 2018 Free Software Foundation, Inc. This program is free software; you may redistribute it under the terms of the GNU General Public License version 3 or (at your option) any later version. This program has absolutely no warranty. [hjl@gnu-cfl-2 bin]$ Check if AR works with --plugin and rc before passing --plugin to AR and RANLIB. ChangeLog: * configure: Regenerated. * libtool.m4 (_LT_CMD_OLD_ARCHIVE): Check if AR works with --plugin and rc before enabling --plugin. config/ChangeLog: * gcc-plugin.m4 (GCC_PLUGIN_OPTION): Check if AR works with --plugin and rc before enabling --plugin. gcc/ChangeLog: * configure: Regenerate. libatomic/ChangeLog: * configure: Regenerate. libbacktrace/ChangeLog: * configure: Regenerate. libcc1/ChangeLog: * configure: Regenerate. libffi/ChangeLog: * configure: Regenerate. libgfortran/ChangeLog: * configure: Regenerate. libgm2/ChangeLog: * configure: Regenerate. libgomp/ChangeLog: * configure: Regenerate. libiberty/ChangeLog: * configure: Regenerate. libitm/ChangeLog: * configure: Regenerate. libobjc/ChangeLog: * configure: Regenerate. libphobos/ChangeLog: * configure: Regenerate. libquadmath/ChangeLog: * configure: Regenerate. libsanitizer/ChangeLog: * configure: Regenerate. libssp/ChangeLog: * configure: Regenerate. libstdc++-v3/ChangeLog: * configure: Regenerate. libvtv/ChangeLog: * configure: Regenerate. lto-plugin/ChangeLog: * configure: Regenerate. zlib/ChangeLog: * configure: Regenerate.
2023-08-07Sync with binutils: GCC: Pass --plugin to AR and RANLIBH.J. Lu
Sync with binutils for building binutils with LTO: 50ad1254d50 GCC: Pass --plugin to AR and RANLIB Detect GCC LTO plugin. Pass --plugin to AR and RANLIB to support LTO build. ChangeLog: * Makefile.tpl (AR): Add @AR_PLUGIN_OPTION@ (RANLIB): Add @RANLIB_PLUGIN_OPTION@. * configure.ac: Include config/gcc-plugin.m4. AC_SUBST AR_PLUGIN_OPTION and RANLIB_PLUGIN_OPTION. * libtool.m4 (_LT_CMD_OLD_ARCHIVE): Pass --plugin to AR and RANLIB if possible. * Makefile.in: Regenerated. * configure: Likewise. config/ChangeLog: * gcc-plugin.m4 (GCC_PLUGIN_OPTION): New. libiberty/ChangeLog: * Makefile.in (AR): Add @AR_PLUGIN_OPTION@ (RANLIB): Add @RANLIB_PLUGIN_OPTION@. (configure_deps): Depend on ../config/gcc-plugin.m4. * configure.ac: AC_SUBST AR_PLUGIN_OPTION and RANLIB_PLUGIN_OPTION. * aclocal.m4: Regenerated. * configure: Likewise. zlib/ChangeLog: * configure: Regenerated. gcc/ChangeLog: * configure: Regenerate. libatomic/ChangeLog: * configure: Regenerate. libbacktrace/ChangeLog: * configure: Regenerate. libcc1/ChangeLog: * configure: Regenerate. libffi/ChangeLog: * configure: Regenerate. libgfortran/ChangeLog: * configure: Regenerate. libgm2/ChangeLog: * configure: Regenerate. libgomp/ChangeLog: * configure: Regenerate. libitm/ChangeLog: * configure: Regenerate. libobjc/ChangeLog: * configure: Regenerate. libphobos/ChangeLog: * configure: Regenerate. libquadmath/ChangeLog: * configure: Regenerate. libsanitizer/ChangeLog: * configure: Regenerate. libssp/ChangeLog: * configure: Regenerate. libstdc++-v3/ChangeLog: * configure: Regenerate. libvtv/ChangeLog: * configure: Regenerate. lto-plugin/ChangeLog: * configure: Regenerate.
2023-06-17Daily bump.GCC Administrator
2023-06-16Regenerate some autotools generated filesMartin Jambor
As discussed in https://gcc.gnu.org/pipermail/gcc-patches/2023-June/621976.html this should put the autotools generated files in sync to what they were generated from (and make an automated checker happy). Tested by bootstrapping on top of only a few revisions ago. zlib/ChangeLog: 2023-06-16 Martin Jambor <mjambor@suse.cz> * Makefile.in: Regenerate. * configure: Likewise. gcc/ChangeLog: 2023-06-16 Martin Jambor <mjambor@suse.cz> * configure: Regenerate.
2023-06-16Daily bump.GCC Administrator
2023-06-15configure: Implement --enable-host-pieMarek Polacek
[ This is my third attempt to add this configure option. The first version was approved but it came too late in the development cycle. The second version was also approved, but I had to revert it: <https://gcc.gnu.org/pipermail/gcc-patches/2022-November/607082.html>. I've fixed the problem (by moving $(PICFLAG) from INTERNAL_CFLAGS to ALL_COMPILERFLAGS). Another change is that since r13-4536 I no longer need to touch Makefile.def, so this patch is simplified. ] This patch implements the --enable-host-pie configure option which makes the compiler executables PIE. This can be used to enhance protection against ROP attacks, and can be viewed as part of a wider trend to harden binaries. It is similar to the option --enable-host-shared, except that --e-h-s won't add -shared to the linker flags whereas --e-h-p will add -pie. It is different from --enable-default-pie because that option just adds an implicit -fPIE/-pie when the compiler is invoked, but the compiler itself isn't PIE. Since r12-5768-gfe7c3ecf, PCH works well with PIE, so there are no PCH regressions. When building the compiler, the build process may use various in-tree libraries; these need to be built with -fPIE so that it's possible to use them when building a PIE. For instance, when --with-included-gettext is in effect, intl object files must be compiled with -fPIE. Similarly, when building in-tree gmp, isl, mpfr and mpc, they must be compiled with -fPIE. With this patch and --enable-host-pie used to configure gcc: $ file gcc/cc1{,plus,obj,gm2} gcc/f951 gcc/lto1 gcc/cpp gcc/go1 gcc/rust1 gcc/gnat1 gcc/cc1: ELF 64-bit LSB pie executable, x86-64, version 1 (GNU/Linux), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, BuildID[sha1]=98e22cde129d304aa6f33e61b1c39e144aeb135e, for GNU/Linux 3.2.0, with debug_info, not stripped gcc/cc1plus: ELF 64-bit LSB pie executable, x86-64, version 1 (GNU/Linux), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, BuildID[sha1]=859d1ea37e43dfe50c18fd4e3dd9a34bb1db8f77, for GNU/Linux 3.2.0, with debug_info, not stripped gcc/cc1obj: ELF 64-bit LSB pie executable, x86-64, version 1 (GNU/Linux), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, BuildID[sha1]=1964f8ecee6163182bc26134e2ac1f324816e434, for GNU/Linux 3.2.0, with debug_info, not stripped gcc/cc1gm2: ELF 64-bit LSB pie executable, x86-64, version 1 (GNU/Linux), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, BuildID[sha1]=a396672c7ff913d21855829202e7b02ecf42ff4c, for GNU/Linux 3.2.0, with debug_info, not stripped gcc/f951: ELF 64-bit LSB pie executable, x86-64, version 1 (GNU/Linux), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, BuildID[sha1]=59c523db893186547ac75c7a71f48be0a461c06b, for GNU/Linux 3.2.0, with debug_info, not stripped gcc/lto1: ELF 64-bit LSB pie executable, x86-64, version 1 (GNU/Linux), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, BuildID[sha1]=084a7b77df7be2d63c2d4c655b5bbc3fcdb6038d, for GNU/Linux 3.2.0, with debug_info, not stripped gcc/cpp: ELF 64-bit LSB pie executable, x86-64, version 1 (GNU/Linux), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, BuildID[sha1]=3503bf8390d219a10d6653b8560aa21158132168, for GNU/Linux 3.2.0, with debug_info, not stripped gcc/go1: ELF 64-bit LSB pie executable, x86-64, version 1 (GNU/Linux), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, BuildID[sha1]=988cc673af4fba5dcb482f4b34957b99050a68c5, for GNU/Linux 3.2.0, with debug_info, not stripped gcc/rust1: ELF 64-bit LSB pie executable, x86-64, version 1 (GNU/Linux), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, BuildID[sha1]=b6a5d3d514446c4dcdee0707f086ab9b274a8a3c, for GNU/Linux 3.2.0, with debug_info, not stripped gcc/gnat1: ELF 64-bit LSB pie executable, x86-64, version 1 (GNU/Linux), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, BuildID[sha1]=bb11ccdc2c366fe3fe0980476bcd8ca19b67f9dc, for GNU/Linux 3.2.0, with debug_info, not stripped I plan to add an option to link with -Wl,-z,now. Bootstrapped on x86_64-pc-linux-gnu with --with-included-gettext --enable-host-pie as well as without --enable-host-pie. Also tested on a Debian system where the system gcc was configured with --enable-default-pie. Co-Authored by: Iain Sandoe <iain@sandoe.co.uk> ChangeLog: * configure.ac (--enable-host-pie): New check. Set PICFLAG after this check. * configure: Regenerate. c++tools/ChangeLog: * Makefile.in: Rename PIEFLAG to PICFLAG. Set LD_PICFLAG. Use it. Use pic/libiberty.a if PICFLAG is set. * configure.ac (--enable-default-pie): Set PICFLAG instead of PIEFLAG. (--enable-host-pie): New check. * configure: Regenerate. fixincludes/ChangeLog: * Makefile.in: Set and use PICFLAG and LD_PICFLAG. Use the "pic" build of libiberty if PICFLAG is set. * configure.ac: * configure: Regenerate. gcc/ChangeLog: * Makefile.in: Set LD_PICFLAG. Use it. Set enable_host_pie. Remove NO_PIE_CFLAGS and NO_PIE_FLAG. Pass LD_PICFLAG to ALL_LINKERFLAGS. Use the "pic" build of libiberty if --enable-host-pie. * configure.ac (--enable-host-shared): Don't set PICFLAG here. (--enable-host-pie): New check. Set PICFLAG and LD_PICFLAG after this check. * configure: Regenerate. * doc/install.texi: Document --enable-host-pie. gcc/ada/ChangeLog: * gcc-interface/Make-lang.in (ALL_ADAFLAGS): Remove NO_PIE_CFLAGS. Add PICFLAG. Use PICFLAG when building ada/b_gnat1.o and ada/b_gnatb.o. * gcc-interface/Makefile.in: Use pic/libiberty.a if PICFLAG is set. Remove NO_PIE_FLAG. gcc/m2/ChangeLog: * Make-lang.in: New var, GM2_PICFLAGS. Use it. gcc/d/ChangeLog: * Make-lang.in: Remove NO_PIE_CFLAGS. intl/ChangeLog: * Makefile.in: Use @PICFLAG@ in COMPILE as well. * configure.ac (--enable-host-shared): Don't set PICFLAG here. (--enable-host-pie): New check. Set PICFLAG after this check. * configure: Regenerate. libcody/ChangeLog: * Makefile.in: Pass LD_PICFLAG to LDFLAGS. * configure.ac (--enable-host-shared): Don't set PICFLAG here. (--enable-host-pie): New check. Set PICFLAG and LD_PICFLAG after this check. * configure: Regenerate. libcpp/ChangeLog: * configure.ac (--enable-host-shared): Don't set PICFLAG here. (--enable-host-pie): New check. Set PICFLAG after this check. * configure: Regenerate. libdecnumber/ChangeLog: * configure.ac (--enable-host-shared): Don't set PICFLAG here. (--enable-host-pie): New check. Set PICFLAG after this check. * configure: Regenerate. libiberty/ChangeLog: * configure.ac: Also set shared when enable_host_pie. * configure: Regenerate. zlib/ChangeLog: * configure.ac (--enable-host-shared): Don't set PICFLAG here. (--enable-host-pie): New check. Set PICFLAG after this check. * configure: Regenerate.
2022-11-24Daily bump.GCC Administrator
2022-11-22Revert "configure: Implement --enable-host-pie"Marek Polacek
This reverts commit 251c72a68af3a8b0638705b73ef120ffdf0053eb.
2022-11-22configure: Implement --enable-host-pieMarek Polacek
This patch implements the --enable-host-pie configure option which makes the compiler executables PIE. This can be used to enhance protection against ROP attacks, and can be viewed as part of a wider trend to harden binaries. It is similar to the option --enable-host-shared, except that --e-h-s won't add -shared to the linker flags whereas --e-h-p will add -pie. It is different from --enable-default-pie because that option just adds an implicit -fPIE/-pie when the compiler is invoked, but the compiler itself isn't PIE. Since r12-5768-gfe7c3ecf, PCH works well with PIE, so there are no PCH regressions. When building the compiler, the build process may use various in-tree libraries; these need to be built with -fPIE so that it's possible to use them when building a PIE. For instance, when --with-included-gettext is in effect, intl object files must be compiled with -fPIE. Similarly, when building in-tree gmp, isl, mpfr and mpc, they must be compiled with -fPIE. I plan to add an option to link with -Wl,-z,now. ChangeLog: * Makefile.def: Pass $(PICFLAG) to AM_CFLAGS for gmp, mpfr, mpc, and isl. * Makefile.in: Regenerate. * Makefile.tpl: Set PICFLAG. * configure.ac (--enable-host-pie): New check. Set PICFLAG after this check. * configure: Regenerate. c++tools/ChangeLog: * Makefile.in: Rename PIEFLAG to PICFLAG. Set LD_PICFLAG. Use it. Use pic/libiberty.a if PICFLAG is set. * configure.ac (--enable-default-pie): Set PICFLAG instead of PIEFLAG. (--enable-host-pie): New check. * configure: Regenerate. fixincludes/ChangeLog: * Makefile.in: Set and use PICFLAG and LD_PICFLAG. Use the "pic" build of libiberty if PICFLAG is set. * configure.ac: * configure: Regenerate. gcc/ChangeLog: * Makefile.in: Set LD_PICFLAG. Use it. Set enable_host_pie. Remove NO_PIE_CFLAGS and NO_PIE_FLAG. Pass LD_PICFLAG to ALL_LINKERFLAGS. Use the "pic" build of libiberty if --enable-host-pie. * configure.ac (--enable-host-shared): Don't set PICFLAG here. (--enable-host-pie): New check. Set PICFLAG and LD_PICFLAG after this check. * configure: Regenerate. * doc/install.texi: Document --enable-host-pie. gcc/d/ChangeLog: * Make-lang.in: Remove NO_PIE_CFLAGS. intl/ChangeLog: * Makefile.in: Use @PICFLAG@ in COMPILE as well. * configure.ac (--enable-host-shared): Don't set PICFLAG here. (--enable-host-pie): New check. Set PICFLAG after this check. * configure: Regenerate. libcody/ChangeLog: * Makefile.in: Pass LD_PICFLAG to LDFLAGS. * configure.ac (--enable-host-shared): Don't set PICFLAG here. (--enable-host-pie): New check. Set PICFLAG and LD_PICFLAG after this check. * configure: Regenerate. libcpp/ChangeLog: * configure.ac (--enable-host-shared): Don't set PICFLAG here. (--enable-host-pie): New check. Set PICFLAG after this check. * configure: Regenerate. libdecnumber/ChangeLog: * configure.ac (--enable-host-shared): Don't set PICFLAG here. (--enable-host-pie): New check. Set PICFLAG after this check. * configure: Regenerate. libiberty/ChangeLog: * configure.ac: Also set shared when enable_host_pie. * configure: Regenerate. zlib/ChangeLog: * configure.ac (--enable-host-shared): Don't set PICFLAG here. (--enable-host-pie): New check. Set PICFLAG after this check. * configure: Regenerate.
2022-10-13Daily bump.GCC Administrator
2022-10-12regenerate configure filesMartin Liska
Needed after a recent change. gcc/ChangeLog: * configure: Regenerate. libatomic/ChangeLog: * configure: Regenerate. libbacktrace/ChangeLog: * configure: Regenerate. libcc1/ChangeLog: * configure: Regenerate. libffi/ChangeLog: * configure: Regenerate. libgfortran/ChangeLog: * configure: Regenerate. libgomp/ChangeLog: * configure: Regenerate. libitm/ChangeLog: * configure: Regenerate. libobjc/ChangeLog: * configure: Regenerate. liboffloadmic/ChangeLog: * configure: Regenerate. * plugin/configure: Regenerate. libphobos/ChangeLog: * configure: Regenerate. libquadmath/ChangeLog: * configure: Regenerate. libsanitizer/ChangeLog: * configure: Regenerate. libssp/ChangeLog: * configure: Regenerate. libstdc++-v3/ChangeLog: * configure: Regenerate. libvtv/ChangeLog: * configure: Regenerate. lto-plugin/ChangeLog: * configure: Regenerate. zlib/ChangeLog: * configure: Regenerate.
2022-10-12Daily bump.GCC Administrator
2022-10-11Generic configury support for shared libs on VxWorksOlivier Hainque
This change adds the configury bits to activate the build of shared libs on VxWorks ports configured with --enable-shared, for libraries variants where this is generally supported (rtp, code model !large - currently not compatible with -fPIC). Set lt_cv_deplibs_check_method in libtool.m4, so the build of libraries know how to establish dependencies. This is useful in configurations such as aarch64 where proper support of LSE relies on accurate dependency information between libstdc++ and libgcc_s to begin with. Regenerate configure scripts to reflect libtool.m4 change. 2022-10-09 Olivier Hainque <hainque@adacore.com> * libtool.m4 (*vxworks*): When enable_shared, set dynamic_linker and friends for rtp !large. Assume the linker has the required abilities and set lt_cv_deplibs_check_method. gcc/ * config.gcc (*vxworks*): Add t-slibgcc fragment if enable_shared. libgcc/ * config.host (*vxworks*): When enable_shared, add libgcc and crtstuff "shared" fragments for rtp except large code model. (aarch64*-wrs-vxworks7*): Remove t-slibgcc-libgcc from the list of fragments. 2022-10-09 Olivier Hainque <hainque@adacore.com> gcc/ * configure: Regenerate. libatomic/ * configure: Regenerate. libbacktrace/ * configure: Regenerate. libcc1/ * configure: Regenerate. libffi/ * configure: Regenerate. libgfortran/ * configure: Regenerate. libgomp/ * configure: Regenerate. libitm/ * configure: Regenerate. libobjc/ * configure: Regenerate. liboffloadmic/ * configure: Regenerate. liboffloadmic/ * plugin/configure: Regenerate. libphobos/ * configure: Regenerate. libquadmath/ * configure: Regenerate. libsanitizer/ * configure: Regenerate. libssp/ * configure: Regenerate. libstdc++-v3/ * configure: Regenerate. libvtv/ * configure: Regenerate. lto-plugin/ * configure: Regenerate. zlib/ * configure: Regenerate.
2022-08-26Daily bump.GCC Administrator
2022-08-25regenerate configure files and config.h.in filesMartin Liska
fixincludes/ChangeLog: * config.h.in: Regenerate. * configure: Regenerate. libada/ChangeLog: * configure: Regenerate. libiberty/ChangeLog: * configure: Regenerate. libobjc/ChangeLog: * configure: Regenerate. liboffloadmic/ChangeLog: * configure: Regenerate. * plugin/configure: Regenerate. libquadmath/ChangeLog: * configure: Regenerate. libssp/ChangeLog: * configure: Regenerate. libvtv/ChangeLog: * configure: Regenerate. zlib/ChangeLog: * configure: Regenerate.
2021-12-17Daily bump.GCC Administrator
2021-12-15Revert "Sync with binutils: GCC: Pass --plugin to AR and RANLIB"H.J. Lu
This reverts commit bf8cdd35117dea2049abbeebcdf14de11b323ef7.
2021-12-16Daily bump.GCC Administrator
2021-12-15Sync with binutils: GCC: Pass --plugin to AR and RANLIBH.J. Lu
Sync with binutils for building binutils with LTO: 50ad1254d50 GCC: Pass --plugin to AR and RANLIB Detect GCC LTO plugin. Pass --plugin to AR and RANLIB to support LTO build. ChangeLog: * Makefile.tpl (AR): Add @AR_PLUGIN_OPTION@ (RANLIB): Add @RANLIB_PLUGIN_OPTION@. * configure.ac: Include config/gcc-plugin.m4. AC_SUBST AR_PLUGIN_OPTION and RANLIB_PLUGIN_OPTION. * libtool.m4 (_LT_CMD_OLD_ARCHIVE): Pass --plugin to AR and RANLIB if possible. * Makefile.in: Regenerated. * configure: Likewise. config/ * gcc-plugin.m4 (GCC_PLUGIN_OPTION): New. libiberty/ * Makefile.in (AR): Add @AR_PLUGIN_OPTION@ (RANLIB): Add @RANLIB_PLUGIN_OPTION@. (configure_deps): Depend on ../config/gcc-plugin.m4. * configure.ac: AC_SUBST AR_PLUGIN_OPTION and RANLIB_PLUGIN_OPTION. * aclocal.m4: Regenerated. * configure: Likewise. zlib/ * configure: Regenerated.
2021-01-06Daily bump.GCC Administrator
2021-01-05Update GNU/Hurd configure supportSamuel Thibault
ChangeLog: * libtool.m4: Match gnu* along other GNU systems. * libgo/config/libtool.m4: Match gnu* along other GNU systems. * libgo/configure: Re-generate. libffi/ * configure: Re-generate. libgomp/ * configure: Re-generate. gcc/ * configure: Re-generate. libatomic/ * configure: Re-generate. libbacktrace/ * configure: Re-generate. libcc1/ * configure: Re-generate. libgfortran/ * configure: Re-generate. libgomp/ * configure: Re-generate. libhsail-rt/ * configure: Re-generate. libitm/ * configure: Re-generate. libobjc/ * configure: Re-generate. liboffloadmic/ * configure: Re-generate. * plugin/configure: Re-generate. libphobos/ * configure: Re-generate. libquadmath/ * configure: Re-generate. libsanitizer/ * configure: Re-generate. libssp/ * configure: Re-generate. libstdc++-v3/ * configure: Re-generate. libvtv/ * configure: Re-generate. lto-plugin/ * configure: Re-generate. zlib/ * configure: Re-generate.
2020-12-06Daily bump.GCC Administrator
2020-12-05Darwin : Update libtool and dependencies for Darwin20 [PR97865]Iain Sandoe
The change in major version (and the increment from Darwin19 to 20) caused libtool tests to fail which resulted in incorrect build settings for shared libraries. We take this opportunity to sort out the shared undefined symbols state rather than propagating the current unsound behaviour into a new rev. This change means that we default to the case that missing symbols are considered an error, and if one wants to allow this intentionally, the confiuration for that case should be set appropriately. Three existing cases need undefined dynamic lookup: libitm, where there is already a configuration mechanism to add the flags. libcc1, where we add simple configuration to add the flags for Darwin. libsanitizer, where we can add to the existing extra flags. libcc1/ChangeLog: PR target/97865 * Makefile.am: Add dynamic_lookup to LD flags for Darwin. * configure.ac: Test for Darwin host and set a flag. * Makefile.in: Regenerate. * configure: Regenerate. libitm/ChangeLog: PR target/97865 * configure.tgt: Add dynamic_lookup to XLDFLAGS for Darwin. * configure: Regenerate. libsanitizer/ChangeLog: PR target/97865 * configure.tgt: Add dynamic_lookup to EXTRA_CXXFLAGS for Darwin. * configure: Regenerate. ChangeLog: PR target/97865 * libtool.m4: Update handling of Darwin platform link flags for Darwin20. gcc/ChangeLog: PR target/97865 * configure: Regenerate. libatomic/ChangeLog: PR target/97865 * configure: Regenerate. libbacktrace/ChangeLog: PR target/97865 * configure: Regenerate. libffi/ChangeLog: PR target/97865 * configure: Regenerate. libgfortran/ChangeLog: PR target/97865 * configure: Regenerate. libgomp/ChangeLog: PR target/97865 * configure: Regenerate. libhsail-rt/ChangeLog: PR target/97865 * configure: Regenerate. libobjc/ChangeLog: PR target/97865 * configure: Regenerate. libphobos/ChangeLog: PR target/97865 * configure: Regenerate. libquadmath/ChangeLog: PR target/97865 * configure: Regenerate. libssp/ChangeLog: PR target/97865 * configure: Regenerate. libstdc++-v3/ChangeLog: PR target/97865 * configure: Regenerate. libvtv/ChangeLog: PR target/97865 * configure: Regenerate. zlib/ChangeLog: PR target/97865 * configure: Regenerate.
2020-11-30Daily bump.GCC Administrator
2020-11-29Fix hppa64-hpux11 build to remove source paths from embedded path.John David Anglin
This change adds the +nodefaultrpath ld option to remove all library paths that were specified with the -L option from the embedded path. 2020-11-29 John David Anglin <danglin@gcc.gnu.org> ChangeLog: * libtool.m4 (archive_cmds): Add +nodefaultrpath ld option on hppa64-*-hpux11*. libatomic/ChangeLog: * configure: Regenerate. libbacktrace/ChangeLog: * configure: Regenerate. libcc1/ChangeLog: * configure: Regenerate. libffi/ChangeLog: * configure: Regenerate. libgfortran/ChangeLog: * configure: Regenerate. libgomp/ChangeLog: * configure: Regenerate. libhsail-rt/ChangeLog: * configure: Regenerate. libitm/ChangeLog: * configure: Regenerate. libobjc/ChangeLog: * configure: Regenerate. liboffloadmic/ChangeLog: * configure: Regenerate. * plugin/configure: Regenerate. libquadmath/ChangeLog: * configure: Regenerate. libsanitizer/ChangeLog: * configure: Regenerate. libssp/ChangeLog: * configure: Regenerate. libstdc++-v3/ChangeLog: * configure: Regenerate. libvtv/ChangeLog: * configure: Regenerate. lto-plugin/ChangeLog: * configure: Regenerate. zlib/ChangeLog: * configure: Regenerate.
2020-05-30Daily bump.GCC Administrator
2020-05-29Avoid nested save_CFLAGS and save_LDFLAGSH.J. Lu
Avoid nested save_CFLAGS and save_LDFLAGS by replacing save_CFLAGS and save_LDFLAGS with cet_save_CFLAGS and cet_save_LDFLAGS in cet.m4. config/ PR bootstrap/95413 * cet.m4: Replace save_CFLAGS and save_LDFLAGS with cet_save_CFLAGS and cet_save_LDFLAGS. gcc/ PR bootstrap/95413 * configure: Regenerated. libatomic/ PR bootstrap/95413 * configure: Regenerated. libbacktrace/ PR bootstrap/95413 * configure: Regenerated. libcc1/ PR bootstrap/95413 * configure: Regenerated. libcpp/ PR bootstrap/95413 * configure: Regenerated. libdecnumber/ PR bootstrap/95413 * configure: Regenerated. libgcc/ PR bootstrap/95413 * configure: Regenerated. libgfortran/ PR bootstrap/95413 * configure: Regenerated. libgomp/ PR bootstrap/95413 * configure: Regenerated. libiberty/ PR bootstrap/95413 * configure: Regenerated. libitm/ PR bootstrap/95413 * configure: Regenerated. libobjc/ PR bootstrap/95413 * configure: Regenerated. libphobos/ PR bootstrap/95413 * configure: Regenerated. libquadmath/ PR bootstrap/95413 * configure: Regenerated. libsanitizer/ PR bootstrap/95413 * configure: Regenerated. libssp/ PR bootstrap/95413 * configure: Regenerated. libstdc++-v3/ PR bootstrap/95413 * configure: Regenerated. libvtv/ PR bootstrap/95413 * configure: Regenerated. lto-plugin/ PR bootstrap/95413 * configure: Regenerated. zlib/ PR bootstrap/95413 * configure: Regenerated.
2020-05-15x86: Also check if -fcf-protection worksH.J. Lu
When defaulting CET run-time support to auto, check if -fcf-protection works. Even if the stage1 GCC doesn't support -fcf-protection, since the final GCC does, CET run-time support will be enabled by default if binutils support CET. config/ PR bootstrap/95147 * cet.m4 (GCC_CET_FLAGS): Also check if -fcf-protection works when defaulting to auto. libatomic/ PR bootstrap/95147 * configure: Regenerated. libbacktrace/ PR bootstrap/95147 * configure: Regenerated. libgcc/ PR bootstrap/95147 * configure: Regenerated. libgfortran/ PR bootstrap/95147 * configure: Regenerated. libgomp/ PR bootstrap/95147 * configure: Regenerated. libitm/ PR bootstrap/95147 * configure: Regenerated. libobjc/ PR bootstrap/95147 * configure: Regenerated. libphobos/ PR bootstrap/95147 * configure: Regenerated. libquadmath/ PR bootstrap/95147 * configure: Regenerated. libsanitizer/ PR bootstrap/95147 * configure: Regenerated. libssp/ PR bootstrap/95147 * configure: Regenerated. libstdc++-v3/ PR bootstrap/95147 * configure: Regenerated. libvtv/ PR bootstrap/95147 * configure: Regenerated. zlib/ PR bootstrap/95147 * configure: Regenerated.
2020-05-14x86: Default CET run-time support to autoH.J. Lu
CET has been added since GCC 8. This patch defaults CET run-time support to auto. It enables CET run-time support if asssembler supports CET instructions and multi-byte NOPs are enabled via SSE2. config/ * cet.m4 (GCC_CET_FLAGS): Change default to auto. gcc/ * configure: Regenerated. libatomic/ * configure: Regenerated. libbacktrace/ * configure: Regenerated. libcc1/ * configure: Regenerated. libcpp/ * configure: Regenerated. libdecnumber/ * configure: Regenerated. libgcc/ * configure: Regenerated. libgfortran/ * configure: Regenerated. libgomp/ * configure: Regenerated. libitm/ * configure: Regenerated. libobjc/ * configure: Regenerated. libquadmath/ * configure: Regenerated. libsanitizer/ * configure: Regenerated. libssp/ * configure: Regenerated. libstdc++-v3/ * configure: Regenerated. libvtv/ * configure: Regenerated. zlib/ * configure: Regenerated.
2020-05-12zlib: Add --enable-cet to configureH.J. Lu
When --enable-cet is used to configure GCC, enable Intel CET in target zlib. * Makefile.am (AM_CFLAGS): New. * configure.ac (CET_FLAGS): Add GCC_CET_FLAGS and AC_SUBST. * Makefile.in: Regenerated. * aclocal.m4: Likewise. * configure.ac: Likewise.
2020-01-24Add `--with-toolexeclibdir=' configuration optionMaciej W. Rozycki
Provide means, in the form of a `--with-toolexeclibdir=' configuration option, to override the default installation directory for target libraries, otherwise known as $toolexeclibdir. This is so that it is possible to get newly-built libraries, particularly the shared ones, installed in a common place, so that they can be readily used by the target system as their host libraries, possibly over NFS, without a need to manually copy them over from the currently hardcoded location they would otherwise be installed in. In the presence of the `--enable-version-specific-runtime-libs' option and for configurations building native GCC the option is ignored. config/ * toolexeclibdir.m4: New file. gcc/ * doc/install.texi (Cross-Compiler-Specific Options): Document `--with-toolexeclibdir' option. libada/ * Makefile.in (configure_deps): Add `toolexeclibdir.m4'. * configure.ac: Handle `--with-toolexeclibdir='. * configure: Regenerate. libatomic/ * configure.ac: Handle `--with-toolexeclibdir='. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate. * testsuite/Makefile.in: Regenerate. libffi/ * configure.ac: Handle `--with-toolexeclibdir='. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate. * include/Makefile.in: Regenerate. * man/Makefile.in: Regenerate. * testsuite/Makefile.in: Regenerate. libgcc/ * Makefile.in (configure_deps): Add `toolexeclibdir.m4'. * configure.ac: Handle `--with-toolexeclibdir='. * configure: Regenerate. libgfortran/ * configure.ac: Handle `--with-toolexeclibdir='. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate. libgomp/ * configure.ac: Handle `--with-toolexeclibdir='. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate. * testsuite/Makefile.in: Regenerate. libhsail-rt/ * configure.ac: Handle `--with-toolexeclibdir='. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate. libitm/ * configure.ac: Handle `--with-toolexeclibdir='. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate. * testsuite/Makefile.in: Regenerate. libobjc/ * Makefile.in (aclocal_deps): Add `toolexeclibdir.m4'. * aclocal.m4: Include `toolexeclibdir.m4'. * configure.ac: Handle `--with-toolexeclibdir='. * configure: Regenerate. liboffloadmic/ * plugin/configure.ac: Handle `--with-toolexeclibdir='. * plugin/Makefile.in: Regenerate. * plugin/aclocal.m4: Regenerate. * plugin/configure: Regenerate. * configure.ac: Handle `--with-toolexeclibdir='. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate. libphobos/ * m4/druntime.m4: Handle `--with-toolexeclibdir='. * m4/Makefile.in: Regenerate. * libdruntime/Makefile.in: Regenerate. * src/Makefile.in: Regenerate. * testsuite/Makefile.in: Regenerate. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate. libquadmath/ * configure.ac: Handle `--with-toolexeclibdir='. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate. libsanitizer/ * configure.ac: Handle `--with-toolexeclibdir='. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate. * asan/Makefile.in: Regenerate. * interception/Makefile.in: Regenerate. * libbacktrace/Makefile.in: Regenerate. * lsan/Makefile.in: Regenerate. * sanitizer_common/Makefile.in: Regenerate. * tsan/Makefile.in: Regenerate. * ubsan/Makefile.in: Regenerate. libssp/ * configure.ac: Handle `--with-toolexeclibdir='. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate. libstdc++-v3/ * acinclude.m4: Handle `--with-toolexeclibdir='. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate. * doc/Makefile.in: Regenerate. * include/Makefile.in: Regenerate. * libsupc++/Makefile.in: Regenerate. * po/Makefile.in: Regenerate. * python/Makefile.in: Regenerate. * src/Makefile.in: Regenerate. * src/c++11/Makefile.in: Regenerate. * src/c++17/Makefile.in: Regenerate. * src/c++98/Makefile.in: Regenerate. * src/filesystem/Makefile.in: Regenerate. * testsuite/Makefile.in: Regenerate. libvtv/ * configure.ac: Handle `--with-toolexeclibdir='. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate. * testsuite/Makefile.in: Regenerate. zlib/ * configure.ac: Handle `--with-toolexeclibdir='. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate.
2019-09-27Regenerate `configure' scripts for `uclinuxfdpiceabi' libtool.m4 updateMaciej W. Rozycki
A change made with r275564 ("[ARM/FDPIC v6 02/24] [ARM] FDPIC: Handle arm*-*-uclinuxfdpiceabi in configure scripts") to libtool.m4 has not regenerated all the `configure' scripts affected. Fix it. gcc/ * configure: Regenerate. libatomic/ * configure: Regenerate. libbacktrace/ * configure: Regenerate. libcc1/ * configure: Regenerate. libffi/ * configure: Regenerate. libgfortran/ * configure: Regenerate. libgomp/ * configure: Regenerate. libhsail-rt/ * configure: Regenerate. libitm/ * configure: Regenerate. libobjc/ * configure: Regenerate. liboffloadmic/ * configure: Regenerate. libphobos/ * configure: Regenerate. libquadmath/ * configure: Regenerate. libsanitizer/ * configure: Regenerate. libssp/ * configure: Regenerate. libstdc++-v3/ * configure: Regenerate. libvtv/ * configure: Regenerate. lto-plugin/ * configure: Regenerate. zlib/ * configure: Regenerate. From-SVN: r276213
2019-01-21Makefile.am (noinst_LTLIBRARIES): Rename libzgcj_convience.la to ↵Iain Buclaw
libz_convenience.la. 2019-01-21 Iain Buclaw <ibuclaw@gdcproject.org> * Makefile.am (noinst_LTLIBRARIES): Rename libzgcj_convience.la to libz_convenience.la. * Makefile.in: Regenerate. * configure.ac: Remove target_all. * configure: Regenerate. From-SVN: r268119
2018-10-31Update GCC to autoconf 2.69, automake 1.15.1 (PR bootstrap/82856).Joseph Myers
This patch updates GCC to use autoconf 2.69 and automake 1.15.1. (That's not the latest automake version, but it's the one used by binutils-gdb, with which consistency is desirable, and in any case seems a useful incremental update that should make a future update to 1.16.1 easier.) The changes are generally similar to the binutils-gdb ones, and are copied from there where shared files and directories are involved (there are some further changes to such shared directories, however, which I'd expect to apply to binutils-gdb once this patch is in GCC). Largely, obsolete AC_PREREQ calls are removed, while many AC_LANG_SOURCE calls are added to avoid warnings from aclocal and autoconf. Multilib support is no longer included in core automake, meaning that multilib.am needs copying from automake's contrib directory into the GCC source tree. Autoconf 2.69 has Go support, so local copies of that support are removed. I hope the D support will soon be submitted to upstream autoconf so the local copy of that can be removed in a future update. Changes to how automake generates runtest calls mean quotes are removed from RUNTEST definitions in five lib*/testsuite/Makefile.am files (libatomic, libgomp, libitm, libphobos, libvtv; some others have RUNTEST definitions without quotes, which are still OK); libgo and libphobos also get -Wno-override added to AM_INIT_AUTOMAKE so those overrides of RUNTEST do not generate automake warnings. Note that the regeneration did not include regeneration of fixincludes/config.h.in (attempting such regeneration resulted in all the USED_FOR_TARGET conditionals disappearing; and I don't see anything in the fixincludes/ directory that would result in such conditionals being generated, unlike in the gcc/ directory). Also note that libvtv/testsuite/other-tests/Makefile.in was not regenerated; that directory is not listed as a subdirectory for which Makefile.in gets regenerated by calling "automake" in libvtv/, so I'm not sure how it's meant to be regenerated. While I mostly fixed warnings should running aclocal / automake / autoconf, there were various such warnings from automake in the libgfortran, libgo, libgomp, liboffloadmic, libsanitizer, libphobos directories that I did not fix, preferring to leave those to the relevant subsystem maintainers. Specifically, most of those warnings were of the following form (example from libgfortran): Makefile.am:48: warning: source file 'caf/single.c' is in a subdirectory, Makefile.am:48: but option 'subdir-objects' is disabled automake: warning: possible forward-incompatibility. automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. I think it's best for the relevant maintainers to add subdir-objects and do any other associated Makefile.am changes needed. In some cases the paths in the warnings involved ../; I don't know if that adds any extra complications to the use of subdir-objects. I've tested this with native, cross and Canadian cross builds. The risk of any OS-specific issues should I hope be rather lower than if a libtool upgrade were included (we *should* do such an upgrade at some point, but it's more complicated - it involves identifying all our local libtool changes to see if any aren't included in the upstream version we update to, and reverting an upstream libtool patch that's inappropriate for use in GCC); I think it would be better to get this update into GCC so that people can test in different configurations and we can fix any issues found, rather than to try to get more and more testing done before it goes in. top level: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * multilib.am: New file. From automake. Merge from binutils-gdb: 2018-06-19 Simon Marchi <simon.marchi@ericsson.com> * libtool.m4: Use AC_LANG_SOURCE. * configure.ac: Remove AC_PREREQ, use AC_LANG_SOURCE. * ar-lib: New file. * test-driver: New file. * configure: Re-generate. config: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * math.m4, tls.m4: Use AC_LANG_SOURCE. Merge from binutils-gdb: 2018-06-19 Simon Marchi <simon.marchi@ericsson.com> * override.m4 (_GCC_AUTOCONF_VERSION): Bump from 2.64 to 2.69. fixincludes: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * configure.ac: Remove AC_PREREQ. * aclocal.m4, configure: Regenerate. gcc: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE. Use single line for second argument of AC_DEFINE_UNQUOTED. * doc/install.texi (Tools/packages necessary for modifying GCC): Update to autoconf 2.69 and automake 1.15.1. * aclocal.m4, config.in, configure: Regenerate. gnattools: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * configure.ac: Remove AC_PREREQ. * configure: Regenerate. gotools: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * config/go.m4: Remove file. * Makefile.am (ACLOCAL_AMFLAGS): Do not use -I ./config. * configure.ac: Remove AC_PREREQ. Do not include config/go.m4. * Makefile.in, aclocal.m4, configure: Regenerate. intl: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 Merge from binutils-gdb: 2018-06-19 Simon Marchi <simon.marchi@ericsson.com> * configure.ac: Add AC_USE_SYSTEM_EXTENSIONS, remove AC_PREREQ. * configure: Re-generate. * config.h.in: Re-generate. * aclocal.m4: Re-generate. libada: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * configure.ac: Remove AC_PREREQ. * configure: Regenerate. libatomic: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. * acinclude.m4: Use AC_LANG_SOURCE. * configure.ac: Remove AC_PREREQ. * testsuite/Makefile.am (RUNTEST): Remove quotes. * Makefile.in, aclocal.m4, configure, testsuite/Makefile.in: Regenerate. libbacktrace: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. * configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE. * Makefile.in, aclocal.m4, config.h.in, configure: Regenerate. libcc1: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * configure.ac: Remove AC_PREREQ. * Makefile.in, aclocal.m4, configure: Regenerate. libcpp: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE. * aclocal.m4, config.in, configure: Regenerate. libdecnumber: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 Merge from binutils-gdb: 2018-06-19 Simon Marchi <simon.marchi@ericsson.com> * configure.ac: Remove AC_PREREQ. * configure: Re-generate. * aclocal.m4. libffi: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. (AUTOMAKE_OPTIONS): Add info-in-builddir. (CLEANFILES): Remove doc/libffi.info. * configure.ac: Remove AC_PREREQ. * Makefile.in, aclocal.m4, configure, fficonfig.h.in, include/Makefile.in, man/Makefile.in, testsuite/Makefile.in: Regenerate. libgcc: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE. * configure: Regenerate. libgfortran: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. * configure.ac: Remove AC_PREREQ. * Makefile.in, aclocal.m4, config.h.in, configure: Regenerate. libgo [logically part of this change but omitted from the commit]: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. * config/go.m4: Remove file. * config/libtool.m4: Use AC_LANG_SOURCE. * configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE. Use -Wno-override in AM_INIT_AUTOMAKE call. * Makefile.in, aclocal.m4, configure, testsuite/Makefile.in: Regenerate. libgomp: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am (AUTOMAKE_OPTIONS): Add info-in-builddir. (CLEANFILES): Remove libgomp.info. * configure.ac: Remove AC_PREREQ. * testsuite/Makefile.am (RUNTEST): Remove quotes. * Makefile.in, aclocal.m4, configure, testsuite/Makefile.in: Regenerate. libhsail-rt: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * configure.ac: Remove AC_PREREQ. * Makefile.in, aclocal.m4, configure: Regenerate. libiberty: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 Merge from binutils-gdb: 2018-06-19 Simon Marchi <simon.marchi@ericsson.com> * configure.ac: Remove AC_PREREQ. * configure: Re-generate. * config.in: Re-generate. libitm: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. (AUTOMAKE_OPTIONS): Add info-in-builddir. (CLEANFILES): Remove libitm.info. * configure.ac: Remove AC_PREREQ. * testsuite/Makefile.am (RUNTEST): Remove quotes. * Makefile.in, aclocal.m4, configure, testsuite/Makefile.in: Regenerate. libobjc: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * configure.ac: Remove AC_PREREQ. * aclocal.m4, config.h.in, configure: Regenerate. liboffloadmic: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. * configure.ac: Remove AC_PREREQ. * plugin/Makefile.am: Include multilib.am. * plugin/configure.ac: Remove AC_PREREQ. * Makefile.in, aclocal.m4, configure, plugin/Makefile.in, plugin/aclocal.m4, plugin/configure: Regenerate. libphobos: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. * configure.ac: Remove AC_PREREQ. Use -Wno-override in AM_INIT_AUTOMAKE call. * m4/autoconf.m4: Add extra argument to AC_LANG_DEFINE call. * m4/druntime/os.m4: Use AC_LANG_SOURCE. * testsuite/Makefile.am (RUNTEST): Remove quotes. * Makefile.in, aclocal.m4, configure, libdruntime/Makefile.in, src/Makefile.in, testsuite/Makefile.in: Regenerate. libquadmath: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. (AUTOMAKE_OPTIONS): Remove 1.8. Add info-in-builddir. (all-local): Define outside conditional code. (CLEANFILES): Remove libquadmath.info. * configure.ac: Remove AC_PREREQ. * Makefile.in, aclocal.m4, config.h.in, configure: Regenerate. libsanitizer: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. * configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE. * Makefile.in, aclocal.m4, asan/Makefile.in, configure, interception/Makefile.in, libbacktrace/Makefile.in, lsan/Makefile.in, sanitizer_common/Makefile.in, tsan/Makefile.in, ubsan/Makefile.in: Regenerate. libssp: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. (AUTOMAKE_OPTIONS): Remove 1.9.5. * configure.ac: Remove AC_PREREQ. Quote argument to AC_RUN_IFELSE. * Makefile.in, aclocal.m4, configure: Regenerate. libstdc++-v3: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. * configure.ac: Remove AC_PREREQ. * Makefile.in, aclocal.m4, configure, doc/Makefile.in, include/Makefile.in, libsupc++/Makefile.in, po/Makefile.in, python/Makefile.in, src/Makefile.in, src/c++11/Makefile.in, src/c++17/Makefile.in, src/c++98/Makefile.in, src/filesystem/Makefile.in, testsuite/Makefile.in: Regenerate. libvtv: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. * configure.ac: Remove AC_PREREQ. * testsuite/Makefile.am (RUNTEST): Remove quotes. * Makefile.in, aclocal.m4, configure, testsuite/Makefile.in: Regenerate. lto-plugin: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE. * Makefile.in, aclocal.m4, config.h.in, configure: Regenerate. zlib: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. Merge from binutils-gdb: 2018-06-19 Simon Marchi <simon.marchi@ericsson.com> * configure.ac: Modernize AC_INIT call, remove AC_PREREQ. * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add foreign. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate. From-SVN: r265695
generated by cgit v1.2.3 (git 2.25.1) at 2026-05-31 11:27:19 +0000