summaryrefslogtreecommitdiff
path: root/libitm/configure.ac
AgeCommit message (Collapse)Author
2025-01-02Update copyright years.Jakub Jelinek
2024-01-03Update copyright years.Jakub Jelinek
2023-10-22Config,Darwin: Allow for configuring Darwin to use embedded runpath.Iain Sandoe
Recent Darwin versions place contraints on the use of run paths specified in environment variables. This breaks some assumptions in the GCC build. This change allows the user to configure a Darwin build to use '@rpath/libraryname.dylib' in library names and then to add an embedded runpath to executables (and libraries with dependents). The embedded runpath is added by default unless the user adds '-nodefaultrpaths' to the link line. For an installed compiler, it means that any executable built with that compiler will reference the runtimes installed with the compiler (equivalent to hard-coding the library path into the name of the library). During build-time configurations any "-B" entries will be added to the runpath thus the newly-built libraries will be found by exes. Since the install name is set in libtool, that decision needs to be available here (but might also cause dependent ones in Makefiles, so we need to export a conditional). This facility is not available for Darwin 8 or earlier, however the existing environment variable runpath does work there. We default this on for systems where the external DYLD_LIBRARY_PATH does not work and off for Darwin 8 or earlier. For systems that can use either method, if the value is unset, we use the default (which is currently DYLD_LIBRARY_PATH). ChangeLog: * configure: Regenerate. * configure.ac: Do not add default runpaths to GCC exes when we are building -static-libstdc++/-static-libgcc (the default). * libtool.m4: Add 'enable-darwin-at-runpath'. Act on the enable flag to alter Darwin libraries to use @rpath names. gcc/ChangeLog: * aclocal.m4: Regenerate. * configure: Regenerate. * configure.ac: Handle Darwin rpaths. * config/darwin.h: Handle Darwin rpaths. * config/darwin.opt: Handle Darwin rpaths. * Makefile.in: Handle Darwin rpaths. gcc/ada/ChangeLog: * gcc-interface/Makefile.in: Handle Darwin rpaths. gcc/jit/ChangeLog: * Make-lang.in: Handle Darwin rpaths. libatomic/ChangeLog: * Makefile.am: Handle Darwin rpaths. * Makefile.in: Regenerate. * configure: Regenerate. * configure.ac: Handle Darwin rpaths. libbacktrace/ChangeLog: * configure: Regenerate. * configure.ac: Handle Darwin rpaths. libcc1/ChangeLog: * configure: Regenerate. libffi/ChangeLog: * Makefile.am: Handle Darwin rpaths. * Makefile.in: Regenerate. * configure: Regenerate. libgcc/ChangeLog: * config/t-slibgcc-darwin: Generate libgcc_s with an @rpath name. * config.host: Handle Darwin rpaths. libgfortran/ChangeLog: * Makefile.am: Handle Darwin rpaths. * Makefile.in: Regenerate. * configure: Regenerate. * configure.ac: Handle Darwin rpaths libgm2/ChangeLog: * Makefile.am: Handle Darwin rpaths. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate. * configure.ac: Handle Darwin rpaths. * libm2cor/Makefile.am: Handle Darwin rpaths. * libm2cor/Makefile.in: Regenerate. * libm2iso/Makefile.am: Handle Darwin rpaths. * libm2iso/Makefile.in: Regenerate. * libm2log/Makefile.am: Handle Darwin rpaths. * libm2log/Makefile.in: Regenerate. * libm2min/Makefile.am: Handle Darwin rpaths. * libm2min/Makefile.in: Regenerate. * libm2pim/Makefile.am: Handle Darwin rpaths. * libm2pim/Makefile.in: Regenerate. libgomp/ChangeLog: * Makefile.am: Handle Darwin rpaths. * Makefile.in: Regenerate. * configure: Regenerate. * configure.ac: Handle Darwin rpaths libitm/ChangeLog: * Makefile.am: Handle Darwin rpaths. * Makefile.in: Regenerate. * configure: Regenerate. * configure.ac: Handle Darwin rpaths. libobjc/ChangeLog: * configure: Regenerate. * configure.ac: Handle Darwin rpaths. libphobos/ChangeLog: * configure: Regenerate. * configure.ac: Handle Darwin rpaths. * libdruntime/Makefile.am: Handle Darwin rpaths. * libdruntime/Makefile.in: Regenerate. * src/Makefile.am: Handle Darwin rpaths. * src/Makefile.in: Regenerate. libquadmath/ChangeLog: * Makefile.am: Handle Darwin rpaths. * Makefile.in: Regenerate. * configure: Regenerate. * configure.ac: Handle Darwin rpaths. libsanitizer/ChangeLog: * asan/Makefile.am: Handle Darwin rpaths. * asan/Makefile.in: Regenerate. * configure: Regenerate. * hwasan/Makefile.am: Handle Darwin rpaths. * hwasan/Makefile.in: Regenerate. * lsan/Makefile.am: Handle Darwin rpaths. * lsan/Makefile.in: Regenerate. * tsan/Makefile.am: Handle Darwin rpaths. * tsan/Makefile.in: Regenerate. * ubsan/Makefile.am: Handle Darwin rpaths. * ubsan/Makefile.in: Regenerate. libssp/ChangeLog: * Makefile.am: Handle Darwin rpaths. * Makefile.in: Regenerate. * configure: Regenerate. * configure.ac: Handle Darwin rpaths. libstdc++-v3/ChangeLog: * configure: Regenerate. * configure.ac: Handle Darwin rpaths. * src/Makefile.am: Handle Darwin rpaths. * src/Makefile.in: Regenerate. libvtv/ChangeLog: * configure: Regenerate. * configure.ac: Handle Darwin rpaths. lto-plugin/ChangeLog: * configure: Regenerate. * configure.ac: Handle Darwin rpaths. zlib/ChangeLog: * configure: Regenerate. * configure.ac: Handle Darwin rpaths.
2023-06-02Remove stale Autoconf checks for PerlThomas Schwinge
Subversion r110220 (Git commit 03b8fe495d716c004f5491eb2347537f115ab2d8) for PR25884 "libgomp should not require perl to compile" removed all '$(PERL)' usage from libgomp -- but didn't remove the then-unused Autoconf Perl check itself. Later, this Autoconf Perl check appears to have been copied from libgomp into other GCC libraries, likewise unused. libgomp/ * configure.ac (PERL): Remove. * configure: Regenerate. * Makefile.in: Likewise. * testsuite/Makefile.in: Likewise. libatomic/ * configure.ac (PERL): Remove. * configure: Regenerate. * Makefile.in: Likewise. * testsuite/Makefile.in: Likewise. libgm2/ * configure.ac (PERL): Remove. * configure: Regenerate. * Makefile.in: Likewise. * libm2cor/Makefile.in: Likewise. * libm2iso/Makefile.in: Likewise. * libm2log/Makefile.in: Likewise. * libm2min/Makefile.in: Likewise. * libm2pim/Makefile.in: Likewise. libitm/ * configure.ac (PERL): Remove. * configure: Regenerate. * Makefile.in: Likewise. * testsuite/Makefile.in: Likewise.
2023-01-16Update copyright years.Jakub Jelinek
2022-11-14Revert "sphinx: add --with-sphinx-build"Martin Liska
This reverts commit 1f5a932e89b0c2c4a7af7f849ca2e2e3dbf329e0.
2022-11-14Revert "configure: always set SPHINX_BUILD"Martin Liska
This reverts commit 5e749ee3019d7917184af30dab8d09c933c0a4a1.
2022-11-13configure: always set SPHINX_BUILDMartin Liska
During the Sphinx-migration development, I used SPHINX_BUILD='' in order to skip building info and manual pages in gcc folder. However, we've got HAS_SPHINX_BUILD which is the correct flag for that. With the patch, one will get a nicer error message when sphinx-build is missing and one builds (explicitly) a target which depends on it. PR other/107620 gcc/ChangeLog: * configure: Regenerate. * configure.ac: Always set sphinx-build. libgomp/ChangeLog: * configure: Regenerate. * configure.ac: Always set sphinx-build. libiberty/ChangeLog: * configure: Regenerate. * configure.ac: Always set sphinx-build. libitm/ChangeLog: * configure: Regenerate. * configure.ac: Always set sphinx-build. libquadmath/ChangeLog: * configure: Regenerate. * configure.ac: Always set sphinx-build.
2022-11-09sphinx: add --with-sphinx-buildMartin Liska
gcc/ChangeLog: * Makefile.in: Support --with-sphinx-build. * configure.ac: * configure: Regenerate. gcc/ada/ChangeLog: * gcc-interface/Make-lang.in: Support --with-sphinx-build. gcc/d/ChangeLog: * Make-lang.in: Support --with-sphinx-build. gcc/fortran/ChangeLog: * Make-lang.in: Support --with-sphinx-build. gcc/go/ChangeLog: * Make-lang.in: Support --with-sphinx-build. gcc/jit/ChangeLog: * Make-lang.in: Support --with-sphinx-build. libgomp/ChangeLog: * Makefile.in: Support --with-sphinx-build. * configure.ac: Likewise.. * configure: Regenerate. libiberty/ChangeLog: * Makefile.in: Support --with-sphinx-build. * configure.ac: Likewise. * configure: Regenerate. libitm/ChangeLog: * Makefile.in: Support --with-sphinx-build. * configure.ac: Likewise. * configure: Regenerate. libquadmath/ChangeLog: * Makefile.in: Support --with-sphinx-build. * configure.ac: Likewise. * configure: Regenerate.
2022-02-03make `-Werror` optional in libatomic/libbacktrace/libgomp/libitm/libsanitizerDavid Seifert
* `-Werror` can cause issues when a more recent version of GCC compiles an older version: - https://bugs.gentoo.org/229059 - https://bugs.gentoo.org/475350 - https://bugs.gentoo.org/667104 libatomic/ChangeLog: * configure.ac: Support --disable-werror. * configure: Regenerate. libbacktrace/ChangeLog: * configure.ac: Support --disable-werror. * configure: Regenerate. libgomp/ChangeLog: * configure.ac: Support --disable-werror. * configure: Regenerate. libitm/ChangeLog: * configure.ac: Support --disable-werror. * configure: Regenerate. libsanitizer/ChangeLog: * configure.ac: Support --disable-werror. * aclocal.m4: Include also ../config/warnings.m4. * libbacktrace/Makefile.am (WARN_FLAGS): Remove. * configure: Regenerate. * Makefile.in: Regenerate. * asan/Makefile.in: Regenerate. * hwasan/Makefile.in: Regenerate. * interception/Makefile.in: Regenerate. * libbacktrace/Makefile.in: Regenerate. * lsan/Makefile.in: Regenerate. * sanitizer_common/Makefile.in: Regenerate. * tsan/Makefile.in: Regenerate. * ubsan/Makefile.in: Regenerate. Co-Authored-By: Jakub Jelinek <jakub@redhat.com>
2022-01-03Update copyright years.Jakub Jelinek
2021-01-04Update copyright years.Jakub Jelinek
2020-01-24Add `--with-toolexeclibdir=' configuration optionMaciej W. Rozycki
Provide means, in the form of a `--with-toolexeclibdir=' configuration option, to override the default installation directory for target libraries, otherwise known as $toolexeclibdir. This is so that it is possible to get newly-built libraries, particularly the shared ones, installed in a common place, so that they can be readily used by the target system as their host libraries, possibly over NFS, without a need to manually copy them over from the currently hardcoded location they would otherwise be installed in. In the presence of the `--enable-version-specific-runtime-libs' option and for configurations building native GCC the option is ignored. config/ * toolexeclibdir.m4: New file. gcc/ * doc/install.texi (Cross-Compiler-Specific Options): Document `--with-toolexeclibdir' option. libada/ * Makefile.in (configure_deps): Add `toolexeclibdir.m4'. * configure.ac: Handle `--with-toolexeclibdir='. * configure: Regenerate. libatomic/ * configure.ac: Handle `--with-toolexeclibdir='. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate. * testsuite/Makefile.in: Regenerate. libffi/ * configure.ac: Handle `--with-toolexeclibdir='. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate. * include/Makefile.in: Regenerate. * man/Makefile.in: Regenerate. * testsuite/Makefile.in: Regenerate. libgcc/ * Makefile.in (configure_deps): Add `toolexeclibdir.m4'. * configure.ac: Handle `--with-toolexeclibdir='. * configure: Regenerate. libgfortran/ * configure.ac: Handle `--with-toolexeclibdir='. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate. libgomp/ * configure.ac: Handle `--with-toolexeclibdir='. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate. * testsuite/Makefile.in: Regenerate. libhsail-rt/ * configure.ac: Handle `--with-toolexeclibdir='. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate. libitm/ * configure.ac: Handle `--with-toolexeclibdir='. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate. * testsuite/Makefile.in: Regenerate. libobjc/ * Makefile.in (aclocal_deps): Add `toolexeclibdir.m4'. * aclocal.m4: Include `toolexeclibdir.m4'. * configure.ac: Handle `--with-toolexeclibdir='. * configure: Regenerate. liboffloadmic/ * plugin/configure.ac: Handle `--with-toolexeclibdir='. * plugin/Makefile.in: Regenerate. * plugin/aclocal.m4: Regenerate. * plugin/configure: Regenerate. * configure.ac: Handle `--with-toolexeclibdir='. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate. libphobos/ * m4/druntime.m4: Handle `--with-toolexeclibdir='. * m4/Makefile.in: Regenerate. * libdruntime/Makefile.in: Regenerate. * src/Makefile.in: Regenerate. * testsuite/Makefile.in: Regenerate. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate. libquadmath/ * configure.ac: Handle `--with-toolexeclibdir='. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate. libsanitizer/ * configure.ac: Handle `--with-toolexeclibdir='. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate. * asan/Makefile.in: Regenerate. * interception/Makefile.in: Regenerate. * libbacktrace/Makefile.in: Regenerate. * lsan/Makefile.in: Regenerate. * sanitizer_common/Makefile.in: Regenerate. * tsan/Makefile.in: Regenerate. * ubsan/Makefile.in: Regenerate. libssp/ * configure.ac: Handle `--with-toolexeclibdir='. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate. libstdc++-v3/ * acinclude.m4: Handle `--with-toolexeclibdir='. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate. * doc/Makefile.in: Regenerate. * include/Makefile.in: Regenerate. * libsupc++/Makefile.in: Regenerate. * po/Makefile.in: Regenerate. * python/Makefile.in: Regenerate. * src/Makefile.in: Regenerate. * src/c++11/Makefile.in: Regenerate. * src/c++17/Makefile.in: Regenerate. * src/c++98/Makefile.in: Regenerate. * src/filesystem/Makefile.in: Regenerate. * testsuite/Makefile.in: Regenerate. libvtv/ * configure.ac: Handle `--with-toolexeclibdir='. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate. * testsuite/Makefile.in: Regenerate. zlib/ * configure.ac: Handle `--with-toolexeclibdir='. * Makefile.in: Regenerate. * aclocal.m4: Regenerate. * configure: Regenerate.
2020-01-01Update copyright years.Jakub Jelinek
From-SVN: r279813
2019-01-01Update copyright years.Jakub Jelinek
From-SVN: r267494
2018-10-31Update GCC to autoconf 2.69, automake 1.15.1 (PR bootstrap/82856).Joseph Myers
This patch updates GCC to use autoconf 2.69 and automake 1.15.1. (That's not the latest automake version, but it's the one used by binutils-gdb, with which consistency is desirable, and in any case seems a useful incremental update that should make a future update to 1.16.1 easier.) The changes are generally similar to the binutils-gdb ones, and are copied from there where shared files and directories are involved (there are some further changes to such shared directories, however, which I'd expect to apply to binutils-gdb once this patch is in GCC). Largely, obsolete AC_PREREQ calls are removed, while many AC_LANG_SOURCE calls are added to avoid warnings from aclocal and autoconf. Multilib support is no longer included in core automake, meaning that multilib.am needs copying from automake's contrib directory into the GCC source tree. Autoconf 2.69 has Go support, so local copies of that support are removed. I hope the D support will soon be submitted to upstream autoconf so the local copy of that can be removed in a future update. Changes to how automake generates runtest calls mean quotes are removed from RUNTEST definitions in five lib*/testsuite/Makefile.am files (libatomic, libgomp, libitm, libphobos, libvtv; some others have RUNTEST definitions without quotes, which are still OK); libgo and libphobos also get -Wno-override added to AM_INIT_AUTOMAKE so those overrides of RUNTEST do not generate automake warnings. Note that the regeneration did not include regeneration of fixincludes/config.h.in (attempting such regeneration resulted in all the USED_FOR_TARGET conditionals disappearing; and I don't see anything in the fixincludes/ directory that would result in such conditionals being generated, unlike in the gcc/ directory). Also note that libvtv/testsuite/other-tests/Makefile.in was not regenerated; that directory is not listed as a subdirectory for which Makefile.in gets regenerated by calling "automake" in libvtv/, so I'm not sure how it's meant to be regenerated. While I mostly fixed warnings should running aclocal / automake / autoconf, there were various such warnings from automake in the libgfortran, libgo, libgomp, liboffloadmic, libsanitizer, libphobos directories that I did not fix, preferring to leave those to the relevant subsystem maintainers. Specifically, most of those warnings were of the following form (example from libgfortran): Makefile.am:48: warning: source file 'caf/single.c' is in a subdirectory, Makefile.am:48: but option 'subdir-objects' is disabled automake: warning: possible forward-incompatibility. automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. I think it's best for the relevant maintainers to add subdir-objects and do any other associated Makefile.am changes needed. In some cases the paths in the warnings involved ../; I don't know if that adds any extra complications to the use of subdir-objects. I've tested this with native, cross and Canadian cross builds. The risk of any OS-specific issues should I hope be rather lower than if a libtool upgrade were included (we *should* do such an upgrade at some point, but it's more complicated - it involves identifying all our local libtool changes to see if any aren't included in the upstream version we update to, and reverting an upstream libtool patch that's inappropriate for use in GCC); I think it would be better to get this update into GCC so that people can test in different configurations and we can fix any issues found, rather than to try to get more and more testing done before it goes in. top level: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * multilib.am: New file. From automake. Merge from binutils-gdb: 2018-06-19 Simon Marchi <simon.marchi@ericsson.com> * libtool.m4: Use AC_LANG_SOURCE. * configure.ac: Remove AC_PREREQ, use AC_LANG_SOURCE. * ar-lib: New file. * test-driver: New file. * configure: Re-generate. config: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * math.m4, tls.m4: Use AC_LANG_SOURCE. Merge from binutils-gdb: 2018-06-19 Simon Marchi <simon.marchi@ericsson.com> * override.m4 (_GCC_AUTOCONF_VERSION): Bump from 2.64 to 2.69. fixincludes: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * configure.ac: Remove AC_PREREQ. * aclocal.m4, configure: Regenerate. gcc: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE. Use single line for second argument of AC_DEFINE_UNQUOTED. * doc/install.texi (Tools/packages necessary for modifying GCC): Update to autoconf 2.69 and automake 1.15.1. * aclocal.m4, config.in, configure: Regenerate. gnattools: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * configure.ac: Remove AC_PREREQ. * configure: Regenerate. gotools: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * config/go.m4: Remove file. * Makefile.am (ACLOCAL_AMFLAGS): Do not use -I ./config. * configure.ac: Remove AC_PREREQ. Do not include config/go.m4. * Makefile.in, aclocal.m4, configure: Regenerate. intl: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 Merge from binutils-gdb: 2018-06-19 Simon Marchi <simon.marchi@ericsson.com> * configure.ac: Add AC_USE_SYSTEM_EXTENSIONS, remove AC_PREREQ. * configure: Re-generate. * config.h.in: Re-generate. * aclocal.m4: Re-generate. libada: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * configure.ac: Remove AC_PREREQ. * configure: Regenerate. libatomic: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. * acinclude.m4: Use AC_LANG_SOURCE. * configure.ac: Remove AC_PREREQ. * testsuite/Makefile.am (RUNTEST): Remove quotes. * Makefile.in, aclocal.m4, configure, testsuite/Makefile.in: Regenerate. libbacktrace: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. * configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE. * Makefile.in, aclocal.m4, config.h.in, configure: Regenerate. libcc1: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * configure.ac: Remove AC_PREREQ. * Makefile.in, aclocal.m4, configure: Regenerate. libcpp: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE. * aclocal.m4, config.in, configure: Regenerate. libdecnumber: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 Merge from binutils-gdb: 2018-06-19 Simon Marchi <simon.marchi@ericsson.com> * configure.ac: Remove AC_PREREQ. * configure: Re-generate. * aclocal.m4. libffi: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. (AUTOMAKE_OPTIONS): Add info-in-builddir. (CLEANFILES): Remove doc/libffi.info. * configure.ac: Remove AC_PREREQ. * Makefile.in, aclocal.m4, configure, fficonfig.h.in, include/Makefile.in, man/Makefile.in, testsuite/Makefile.in: Regenerate. libgcc: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE. * configure: Regenerate. libgfortran: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. * configure.ac: Remove AC_PREREQ. * Makefile.in, aclocal.m4, config.h.in, configure: Regenerate. libgo [logically part of this change but omitted from the commit]: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. * config/go.m4: Remove file. * config/libtool.m4: Use AC_LANG_SOURCE. * configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE. Use -Wno-override in AM_INIT_AUTOMAKE call. * Makefile.in, aclocal.m4, configure, testsuite/Makefile.in: Regenerate. libgomp: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am (AUTOMAKE_OPTIONS): Add info-in-builddir. (CLEANFILES): Remove libgomp.info. * configure.ac: Remove AC_PREREQ. * testsuite/Makefile.am (RUNTEST): Remove quotes. * Makefile.in, aclocal.m4, configure, testsuite/Makefile.in: Regenerate. libhsail-rt: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * configure.ac: Remove AC_PREREQ. * Makefile.in, aclocal.m4, configure: Regenerate. libiberty: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 Merge from binutils-gdb: 2018-06-19 Simon Marchi <simon.marchi@ericsson.com> * configure.ac: Remove AC_PREREQ. * configure: Re-generate. * config.in: Re-generate. libitm: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. (AUTOMAKE_OPTIONS): Add info-in-builddir. (CLEANFILES): Remove libitm.info. * configure.ac: Remove AC_PREREQ. * testsuite/Makefile.am (RUNTEST): Remove quotes. * Makefile.in, aclocal.m4, configure, testsuite/Makefile.in: Regenerate. libobjc: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * configure.ac: Remove AC_PREREQ. * aclocal.m4, config.h.in, configure: Regenerate. liboffloadmic: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. * configure.ac: Remove AC_PREREQ. * plugin/Makefile.am: Include multilib.am. * plugin/configure.ac: Remove AC_PREREQ. * Makefile.in, aclocal.m4, configure, plugin/Makefile.in, plugin/aclocal.m4, plugin/configure: Regenerate. libphobos: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. * configure.ac: Remove AC_PREREQ. Use -Wno-override in AM_INIT_AUTOMAKE call. * m4/autoconf.m4: Add extra argument to AC_LANG_DEFINE call. * m4/druntime/os.m4: Use AC_LANG_SOURCE. * testsuite/Makefile.am (RUNTEST): Remove quotes. * Makefile.in, aclocal.m4, configure, libdruntime/Makefile.in, src/Makefile.in, testsuite/Makefile.in: Regenerate. libquadmath: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. (AUTOMAKE_OPTIONS): Remove 1.8. Add info-in-builddir. (all-local): Define outside conditional code. (CLEANFILES): Remove libquadmath.info. * configure.ac: Remove AC_PREREQ. * Makefile.in, aclocal.m4, config.h.in, configure: Regenerate. libsanitizer: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. * configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE. * Makefile.in, aclocal.m4, asan/Makefile.in, configure, interception/Makefile.in, libbacktrace/Makefile.in, lsan/Makefile.in, sanitizer_common/Makefile.in, tsan/Makefile.in, ubsan/Makefile.in: Regenerate. libssp: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. (AUTOMAKE_OPTIONS): Remove 1.9.5. * configure.ac: Remove AC_PREREQ. Quote argument to AC_RUN_IFELSE. * Makefile.in, aclocal.m4, configure: Regenerate. libstdc++-v3: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. * configure.ac: Remove AC_PREREQ. * Makefile.in, aclocal.m4, configure, doc/Makefile.in, include/Makefile.in, libsupc++/Makefile.in, po/Makefile.in, python/Makefile.in, src/Makefile.in, src/c++11/Makefile.in, src/c++17/Makefile.in, src/c++98/Makefile.in, src/filesystem/Makefile.in, testsuite/Makefile.in: Regenerate. libvtv: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. * configure.ac: Remove AC_PREREQ. * testsuite/Makefile.am (RUNTEST): Remove quotes. * Makefile.in, aclocal.m4, configure, testsuite/Makefile.in: Regenerate. lto-plugin: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * configure.ac: Remove AC_PREREQ. Use AC_LANG_SOURCE. * Makefile.in, aclocal.m4, config.h.in, configure: Regenerate. zlib: 2018-10-31 Joseph Myers <joseph@codesourcery.com> PR bootstrap/82856 * Makefile.am: Include multilib.am. Merge from binutils-gdb: 2018-06-19 Simon Marchi <simon.marchi@ericsson.com> * configure.ac: Modernize AC_INIT call, remove AC_PREREQ. * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add foreign. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate. From-SVN: r265695
2018-01-03Update copyright years.Jakub Jelinek
From-SVN: r256169
2017-11-17Enable building libitm with Intel CETIgor Tsimbalist
libitm/ * Makefile.in: Regenerate. * acinclude.m4: Add enable.m4 and cet.m4. * config/x86/sjlj.S: Include cet.h. (_ITM_beginTransaction): Add _CET_ENDBR. Save Shadow Stack pointer. (GTM_longjmp): Add _CET_ENDBR. Restore Shadow Stack pointer. * config/x86/target.h (struct gtm_jmpbuf): Add new field for Shadow Stack pointer. * configure: Regenerate. * configure.ac: Set CET_FLAGS. Update XCFLAGS. * configure.ac: Update libtool_VERSION for x86. * testsuite/Makefile.in: Regenerate. From-SVN: r254908
2017-01-17re PR other/79046 (g++ -print-file-name=plugin uses full version number in path)Jakub Jelinek
PR other/79046 * configure: Regenerated. config/ * acx.m4 (GCC_BASE_VER): New m4 function. (ACX_TOOL_DIRS): Require GCC_BASE_VER, for --with-gcc-major-version-only use just major number from BASE-VER. gcc/ * configure.ac: Add GCC_BASE_VER. * Makefile.in (version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. (CFLAGS-gcc.o): Add -DBASEVER=$(BASEVER_s). (gcc.o): Depend on $(BASEVER). * common.opt (dumpfullversion): New option. * gcc.c (driver_handle_option): Handle OPT_dumpfullversion. * doc/invoke.texi: Document -dumpfullversion. * doc/install.texi: Document --with-gcc-major-version-only. * configure: Regenerated. libatomic/ * configure.ac: Add GCC_BASE_VER. * Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * testsuite/Makefile.in: Regenerated. * configure: Regenerated. * Makefile.in: Regenerated. libgomp/ * configure.ac: Add GCC_BASE_VER. * Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * testsuite/Makefile.in: Regenerated. * configure: Regenerated. * Makefile.in: Regenerated. libgcc/ * configure.ac: Add GCC_BASE_VER. * Makefile.in (version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * configure: Regenerated. libssp/ * configure.ac: Add GCC_BASE_VER. * Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * configure: Regenerated. * Makefile.in: Regenerated. liboffloadmic/ * configure.ac: Add GCC_BASE_VER. * Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * aclocal.m4: Include ../config/acx.m4. * configure: Regenerated. * Makefile.in: Regenerated. libquadmath/ * configure.ac: Add GCC_BASE_VER. * Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * configure: Regenerated. * Makefile.in: Regenerated. libmpx/ * configure.ac: Add GCC_BASE_VER. * Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * configure: Regenerated. * Makefile.in: Regenerated. libada/ * configure.ac: Add GCC_BASE_VER. * Makefile.in (version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * configure: Regenerated. lto-plugin/ * configure.ac: Add GCC_BASE_VER. * Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * configure: Regenerated. * Makefile.in: Regenerated. libitm/ * configure.ac: Add GCC_BASE_VER. * Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * testsuite/Makefile.in: Regenerated. * configure: Regenerated. * Makefile.in: Regenerated. fixincludes/ * configure.ac: Add GCC_BASE_VER. * Makefile.in (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * configure: Regenerated. libcilkrts/ * configure.ac: Add GCC_BASE_VER. * Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * aclocal.m4: Include ../config/acx.m4. * configure: Regenerated. * Makefile.in: Regenerated. libcc1/ * configure.ac: Add GCC_BASE_VER. For --with-gcc-major-version-only use just major number from BASE-VER. * configure: Regenerated. * Makefile.in: Regenerated. libobjc/ * configure.ac: Add GCC_BASE_VER. * Makefile.in (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * configure: Regenerated. libstdc++-v3/ * configure.ac: Add GCC_BASE_VER. * fragment.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * po/Makefile.in: Regenerated. * libsupc++/Makefile.in: Regenerated. * testsuite/Makefile.in: Regenerated. * src/Makefile.in: Regenerated. * configure: Regenerated. * Makefile.in: Regenerated. * include/Makefile.in: Regenerated. * doc/Makefile.in: Regenerated. * python/Makefile.in: Regenerated. * src/c++11/Makefile.in: Regenerated. * src/c++98/Makefile.in: Regenerated. * src/filesystem/Makefile.in: Regenerated. libvtv/ * configure.ac: Add GCC_BASE_VER. * Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * testsuite/Makefile.in: Regenerated. * configure: Regenerated. * Makefile.in: Regenerated. libsanitizer/ * configure.ac: Add GCC_BASE_VER. * Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * libbacktrace/Makefile.in: Regenerated. * interception/Makefile.in: Regenerated. * asan/Makefile.in: Regenerated. * ubsan/Makefile.in: Regenerated. * configure: Regenerated. * sanitizer_common/Makefile.in: Regenerated. * lsan/Makefile.in: Regenerated. * Makefile.in: Regenerated. * tsan/Makefile.in: Regenerated. libgfortran/ * configure.ac: Add GCC_BASE_VER. * Makefile.am (gcc_version): Use @get_gcc_base_ver@ instead of cat to get version from BASE-VER file. * configure: Regenerated. * Makefile.in: Regenerated. From-SVN: r244521
2017-01-01Update copyright years.Jakub Jelinek
From-SVN: r243994
2016-12-12Disable hwcaps on libgfortranRainer Orth
libgfortran: * configure.ac: Call GCC_CHECK_LINKER_HWCAP. * Makefile.am (libgfortran_la_LDFLAGS): Add HWCAP_LDFLAGS. * aclocal.m4: Regenerate. * configure: Regenerate. * Makefile.in: Regenerate. config: * hwcaps.m4: New file. libitm: * acinclude.m4 (LIBITM_CHECK_LINKER_FEATURES): Remove. * aclocal.m4: Regenerate. * configure.ac: Call GCC_CHECK_LINKER_HWCAP instead of LIBITM_CHECK_LINKER_HWCAP. From-SVN: r243552
2016-01-20re PR target/69343 (Bootstrap failure on s390{,x}-linux)Richard Henderson
PR bootstrap/69343 PR bootstrap/69339 PR tree-opt/68964 Revert: gcc/ * tree.c (tm_define_builtin): New. (find_tm_vector_type): New. (build_tm_vector_builtins): New. (build_common_builtin_nodes): Call it. libitm/ * Makefile.am (libitm_la_SOURCES) [ARCH_AARCH64]: Add vect128.cc (libitm_la_SOURCES) [ARCH_ARM]: Add neon.cc (libitm_la_SOURCES) [ARCH_PPC]: Add vect128.cc (libitm_la_SOURCES) [ARCH_S390]: Add vect128.cc * configure.ac (ARCH_AARCH64): New conditional. (ARCH_PPC, ARCH_S390): Likewise. * Makefile.in, configure: Rebuild. * libitm.h (_ITM_TYPE_M128): Always define. * vect64.cc: Split ... * vect128.cc: ... out of... * config/x86/x86_sse.cc: ... here. * config/arm/neon.cc: New file. From-SVN: r232631
2016-01-13re PR target/68964 (Internal compiler error for test case ↵Richard Henderson
gcc.dg/tm/20100610.c since r231674) PR 68964 gcc/ PR tree-opt/68964 * target.def (builtin_tm_load, builtin_tm_store): Remove. * config/i386/i386.c (ix86_builtin_tm_load): Remove. (ix86_builtin_tm_store): Remove. (TARGET_VECTORIZE_BUILTIN_TM_LOAD): Remove. (TARGET_VECTORIZE_BUILTIN_TM_STORE): Remove. * doc/tm.texi.in (TARGET_VECTORIZE_BUILTIN_TM_LOAD): Remove. (TARGET_VECTORIZE_BUILTIN_TM_STORE): Remove. * doc/tm.texi: Rebuild. * gtm-builtins.def (BUILT_IN_TM_MEMCPY_RNWT): New. (BUILT_IN_TM_MEMCPY_RTWN): New. * trans-mem.c (tm_log_emit_stmt): Rearrange code for better fallback from vector to integer helpers. (build_tm_load): Handle vector types directly, instead of via target hook. (build_tm_store): Likewise. (expand_assign_tm): Prepare for register types not handled by the above. Copy them to memory and use memcpy. * tree.c (tm_define_builtin): New. (find_tm_vector_type): New. (build_tm_vector_builtins): New. (build_common_builtin_nodes): Call it. libitm/ * Makefile.am (libitm_la_SOURCES) [ARCH_AARCH64]: Add vect128.cc (libitm_la_SOURCES) [ARCH_ARM]: Add neon.cc (libitm_la_SOURCES) [ARCH_PPC]: Add vect128.cc (libitm_la_SOURCES) [ARCH_S390]: Add vect128.cc * configure.ac (ARCH_AARCH64): New conditional. (ARCH_PPC, ARCH_S390): Likewise. * Makefile.in, configure: Rebuild. * libitm.h (_ITM_TYPE_M128): Always define. * vect64.cc: Split ... * vect128.cc: ... out of... * config/x86/x86_sse.cc: ... here. * config/arm/neon.cc: New file. From-SVN: r232330
2016-01-04Update copyright years.Jakub Jelinek
From-SVN: r232055
2015-01-05Update copyright years.Jakub Jelinek
From-SVN: r219188
2014-01-02Update copyright years in libitm/Richard Sandiford
From-SVN: r206298
2013-07-15acinclude.m4 (LIBITM_CHECK_AS_HTM): New.Peter Bergner
libitm/ * acinclude.m4 (LIBITM_CHECK_AS_HTM): New. * configure.ac: Use it. (AC_CHECK_HEADERS): Check for sys/auxv.h. (AC_CHECK_FUNCS): Check for getauxval. * config.h.in, configure: Rebuild. * configure.tgt (target_cpu): Add -mhtm to XCFLAGS. * config/powerpc/target.h: Include sys/auxv.h and htmintrin.h. (USE_HTM_FASTPATH): Define. (_TBEGIN_STARTED, _TBEGIN_INDETERMINATE, _TBEGIN_PERSISTENT, _HTM_RETRIES) New macros. (htm_abort, htm_abort_should_retry, htm_available, htm_begin, htm_init, htm_begin_success, htm_commit, htm_transaction_active): New functions. gcc/ * config.gcc (powerpc*-*-*): Install htmintrin.h and htmxlintrin.h. * config/rs6000/t-rs6000 (MD_INCLUDES): Add htm.md. * config/rs6000/rs6000.opt: Add -mhtm option. * config/rs6000/rs6000-cpus.def (POWERPC_MASKS): Add OPTION_MASK_HTM. (ISA_2_7_MASKS_SERVER): Add OPTION_MASK_HTM. * config/rs6000/rs6000-c.c (rs6000_target_modify_macros): Define __HTM__ if the HTM instructions are available. * config/rs6000/predicates.md (u3bit_cint_operand, u10bit_cint_operand, htm_spr_reg_operand): New define_predicates. * config/rs6000/rs6000.md (define_attr "type"): Add htm. (TFHAR_REGNO, TFIAR_REGNO, TEXASR_REGNO): New define_constants. Include htm.md. * config/rs6000/rs6000-builtin.def (BU_HTM_0, BU_HTM_1, BU_HTM_2, BU_HTM_3, BU_HTM_SPR0, BU_HTM_SPR1): Add support macros for defining HTM builtin functions. * config/rs6000/rs6000.c (RS6000_BUILTIN_H): New macro. (rs6000_reg_names, alt_reg_names): Add HTM SPR register names. (rs6000_init_hard_regno_mode_ok): Add support for HTM instructions. (rs6000_builtin_mask_calculate): Likewise. (rs6000_option_override_internal): Likewise. (bdesc_htm): Add new HTM builtin support. (htm_spr_num): New function. (htm_spr_regno): Likewise. (rs6000_htm_spr_icode): Likewise. (htm_expand_builtin): Likewise. (htm_init_builtins): Likewise. (rs6000_expand_builtin): Add support for HTM builtin functions. (rs6000_init_builtins): Likewise. (rs6000_invalid_builtin, rs6000_opt_mask): Add support for -mhtm option. * config/rs6000/rs6000.h (ASM_CPU_SPEC): Add support for -mhtm. (TARGET_HTM, MASK_HTM): Define macros. (FIRST_PSEUDO_REGISTER): Adjust for new HTM SPR registers. (FIXED_REGISTERS): Likewise. (CALL_USED_REGISTERS): Likewise. (CALL_REALLY_USED_REGISTERS): Likewise. (REG_ALLOC_ORDER): Likewise. (enum reg_class): Likewise. (REG_CLASS_NAMES): Likewise. (REG_CLASS_CONTENTS): Likewise. (REGISTER_NAMES): Likewise. (ADDITIONAL_REGISTER_NAMES): Likewise. (RS6000_BTC_SPR, RS6000_BTC_VOID, RS6000_BTC_32BIT, RS6000_BTC_64BIT, RS6000_BTC_MISC_MASK, RS6000_BTM_HTM): New macros. (RS6000_BTM_COMMON): Add RS6000_BTM_HTM. * config/rs6000/htm.md: New file. * config/rs6000/htmintrin.h: New file. * config/rs6000/htmxlintrin.h: New file. gcc/testsuite/ * lib/target-supports.exp (check_effective_target_powerpc_htm_ok): New function to test if HTM is available. * gcc.target/powerpc/htm-xl-intrin-1.c: New test. * gcc.target/powerpc/htm-builtin-1.c: New test. From-SVN: r200960
2013-02-03Update copyright in libitm.Richard Sandiford
From-SVN: r195697
2012-10-30Detect assembler support for RTMRichard Henderson
* acinclude.m4 (LIBITM_CHECK_AS_RTM): New. * configure.ac: Use it. * config.h.in, configure: Rebuild. * testsuite/Makefile.in: Rebuild. From-SVN: r193017
2012-09-20re PR other/43620 ([4.3 Release Blocker] Uploading to gnu.org will fail due ↵Jakub Jelinek
to automake security issue) PR other/43620 libatomic/ * configure.ac (AM_INIT_AUTOMAKE): Add no-dist. * configure: Regenerate. * Makefile.in: Regenerate. libitm/ * configure.ac (AM_INIT_AUTOMAKE): Add no-dist. * configure: Regenerate. * Makefile.in: Regenerate. From-SVN: r191565
2012-02-13gcc.c (LINK_COMMAND_SPEC): Deal with -fgnu-tm.Eric Botcazou
gcc/ * gcc.c (LINK_COMMAND_SPEC): Deal with -fgnu-tm. (GTM_SELF_SPECS): Define if not already defined. (driver_self_specs): Add GTM_SELF_SPECS. * config/darwin.h (LINK_COMMAND_SPEC_A): Deal with -fgnu-tm. (GTM_SELF_SPECS): Define. * config/i386/cygwin.h (GTM_SELF_SPECS): Likewise. * config/i386/mingw32.h (GTM_SELF_SPECS): Likewise. libitm/ * configure.ac (link_itm): Fix comment. * configure: Regenerate. * testsuite/lib/libitm.exp: Do not pass -litm for the link. From-SVN: r184174
2012-01-23Clear hardware capabilities on libitm.so with Sun ldRainer Orth
* clearcap.map: New file. * acinclude.m4 (LIBITM_CHECK_LINKER_HWCAP): New test. * configure.ac: Call it. Clear HWCAP_LDFLAGS if defaulting to -mavx. * Makefile.am (AM_LDFLAGS): Add $(HWCAP_LDFLAGS) * configure: Regenerate. * Makefile.in: Regenerate. * testsuite/Makefile.in: Regenerate. From-SVN: r183430
2011-12-14arm-linux: Add libitm support.Richard Henderson
* config/arm/hwcap.h, config/arm/hwcap.cc: New files. * config/arm/sjlj.S, config/arm/target.h: New files. * config/generic/asmcfi.h (cfi_adjust_cfa_offset): New. (cfi_rel_offset): New. * config/linux/futex_bits.h: New file. * config/linux/futex.cc: Include futex_bits.h here... * config/linux/futex.h: ... not here. * Makefile.am (libitm_la_SOURCES) <ARCH_ARM>: Add hwcap.cc. * configure.ac (ARCH_AM): New conditional. * Makefile.in, configure: Rebuild. * configure.tgt: Handle ARM. From-SVN: r182355
2011-11-22weakref.m4: New file.Iain Sandoe
config: * weakref.m4: New file. libitm: * configure.ac: Use GCC_CHECK_ELF_STYLE_WEAKREF. * alloc_cpp.cc: Generate dummy functions if we don't HAVE_ELF_STYLE_WEAKREF. * eh_cpp.cc: Likewise. * configure: Regenerate. * aclocal.m4: Likewise. * config.h.in: Likewise. * Makefile.in: Likewise. * testsuite/Makefile.in: Likewise. From-SVN: r181618
2011-11-10libitm: Don't add -mavx if the assembler doesn't support avx.Richard Henderson
* config/x86/x86_avx.cc: Remove #undef __AVX__ hack. Tidy comments. * Makefile.am (x86_avx.lo): Only add -mavx if ARCH_X86_AVX. * configure.ac (ARCH_X86_AVX): New conditional. * Makefile.in, configure: Rebuild. From-SVN: r181261
2011-11-09libitm: Work around assembler missing AVX insns.Richard Henderson
From-SVN: r181246
2011-11-09libitm: Configure for gas cfi pseudo ops.Richard Henderson
* asmcfi.m4: New file. * configure.ac (GCC_AS_CFI_PSEUDO_OP): Test it. * configure, aclocal.m4, config.h.in: Rebuild. * config/generic/asmcfi.h: New file. * config/x86/sjlj.S: Use it. From-SVN: r181224
2011-11-08Check for libitm support at top-level.Richard Henderson
From-SVN: r181168
2011-11-08Merge from transactional-memory branch.Aldy Hernandez
From-SVN: r181154
generated by cgit v1.2.3 (git 2.25.1) at 2026-05-31 16:39:18 +0000