| Age | Commit message (Collapse) | Author |
|---|
|
(#144702)
|
|
Specifically this is the assertion in BasicBlock.cpp. Now that we're not
examining or setting that flag consistently (because it'll be deleted in
about an hour) there's no need to keep this assertion.
Original commit title:
[DebugInfo][RemoveDIs] Remove some debug intrinsic-only codepaths (#143451)
|
|
(#143451)"
This reverts commit c71a2e688828ab3ede4fb54168a674ff68396f61.
/me squints -- this is hitting an assertion I thought had been deleted,
will revert and investigate for a bit.
|
|
These are opportunistic deletions as more places that make use of the
IsNewDbgInfoFormat flag are removed. It should (TM)(R) all be dead code
now that `IsNewDbgInfoFormat` should be true everywhere.
FastISel: we don't need to do debug-aware instruction counting any more,
because there are no debug instructions,
Autoupgrade: you can no-longer avoid autoupgrading of intrinsics to
records
DIBuilder: Delete the code for creating debug intrinsics (!)
LoopUtils: No need to handle debug instructions, they don't exist
|
|
This is for consistency with #139401.
|
|
In [1], Nikita Popov suggested that during lowering 'unreachable' insn
should not generate extra code for naked functions, and this applies to
all architectures. Note that for naked functions, 'unreachable' insn is
necessary in IR since the basic block needs a terminator to end.
This patch checked whether a function is naked function or not. If it is
a naked function, 'unreachable' insn will not generate ISD::TRAP.
[1] https://github.com/llvm/llvm-project/pull/131731
Co-authored-by: Yonghong Song <yonghong.song@linux.dev>
|
|
This focuses on the common interfaces and tablegen. More changes
are needed to individual targets.
|
|
Add operators to Register to supporting adding an offset to get
another Register.
|
|
|
|
|
|
NFC (#127968)"
This reverts commit ff99af7ea03b3be46bec7203bd2b74048d29a52a.
|
|
(#127968)
Use nonstatic member instead. This requires explicit conversions, but
many will go away as we continue converting unsigned to Register.
In a few places where it was simple, I changed unsigned to Register.
|
|
(#117525)
…on returning { i8, i128 }
Fixes https://github.com/llvm/llvm-project/issues/96432.
|
|
All inside LLVM_DEBUG, some of which have been cleaned up by adding block
scopes to allow them to format more nicely.
|
|
|
|
Currently FastISel triggers a fallback if there is an unreachable
terminator and the TrapUnreachable option is enabled (the ISD::TRAP
selection does not actually work).
Add handling for NoTrapAfterNoReturn, in which case we don't actually
need to emit a trap. The test is just there to make sure there is no
FastISel fallback (which is why I'm not testing the case without
noreturn). We have other tests that check the actual unreachable codegen
variations.
|
|
when optimizations are disabled (#117459)
Handle \@llvm.expect.with.probability in SelectionDAGBuilder, FastISel,
and IntrinsicLowering in the same way \@llvm.expect is handled, where
the value is passed through as-is. This can be reached if the intrinsic
is used without optimizations, where it would otherwise be properly
transformed out.
Fixes #115411 for SelectionDAG. A similar patch is likely needed for
GlobalISel.
|
|
Identified with misc-include-cleaner.
|
|
This was using the default address space instead of the
correct one.
Fixes #56055
|
|
This patch is part of a set of patches that add an `-fextend-lifetimes`
flag to clang, which extends the lifetimes of local variables and
parameters for improved debuggability. In addition to that flag, the
patch series adds a pragma to selectively disable `-fextend-lifetimes`,
and an `-fextend-this-ptr` flag which functions as `-fextend-lifetimes`
for this pointers only. All changes and tests in these patches were
written by Wolfgang Pieb (@wolfy1961), while Stephen Tozer (@SLTozer)
has handled review and merging. The extend lifetimes flag is intended to
eventually be set on by `-Og`, as discussed in the RFC
here:
https://discourse.llvm.org/t/rfc-redefine-og-o1-and-add-a-new-level-of-og/72850
This patch implements a new intrinsic instruction in LLVM,
`llvm.fake.use` in IR and `FAKE_USE` in MIR, that takes a single operand
and has no effect other than "using" its operand, to ensure that its
operand remains live until after the fake use. This patch does not emit
fake uses anywhere; the next patch in this sequence causes them to be
emitted from the clang frontend, such that for each variable (or this) a
fake.use operand is inserted at the end of that variable's scope, using
that variable's value. This patch covers everything post-frontend, which
is largely just the basic plumbing for a new intrinsic/instruction,
along with a few steps to preserve the fake uses through optimizations
(such as moving them ahead of a tail call or translating them through
SROA).
Co-authored-by: Stephen Tozer <stephen.tozer@sony.com>
|
|
This is a preparation for changing the data structure of MBBMap.
|
|
sizeWithoutDebug() iterates over the entire block, but all we do is to
check whether the number is not equal to one. In times of debug records,
simply check whether the first and last instructions are equal.
|
|
I don't see the point of this check and SelectionDAG
does not perform it. In the normal usecase, if there's
no debug info the debug intrinsics would not be there
in the first place.
|
|
|
|
Follow up to #86049.
clang-armv8-quick build bot can trigger this branch.
|
|
RFC:
https://discourse.llvm.org/t/rfc-add-llvm-experimental-hot-intrinsic-or-llvm-hot/77641
|
|
Currently patchpoints can only have two result types, `void` and `i64`.
This limits the result to general purpose registers.
This patch makes `patchpoint.i64` an overloadable intrinsic, allowing
result values that can fit in a single register (e.g. integers,
pointers, floats).
|
|
This patch renames DPLabel to DbgLabelRecord, in accordance with the
ongoing DbgRecord rename. This rename was fairly trivial, since DPLabel
isn't as widely used as DPValue and has no real conflicts in either its
full or abbreviated name. As usual, the entire replacement was done
automatically, with `s/DPLabel/DbgLabelRecord/` and `s/DPL/DLR/`.
|
|
This is the major rename patch that prior patches have built towards.
The DPValue class is being renamed to DbgVariableRecord, which reflects
the updated terminology for the "final" implementation of the RemoveDI
feature. This is a pure string substitution + clang-format patch. The
only manual component of this patch was determining where to perform
these string substitutions: `DPValue` and `DPV` are almost exclusively
used for DbgRecords, *except* for:
- llvm/lib/target, where 'DP' is used to mean double-precision, and so
appears as part of .td files and in variable names. NB: There is a
single existing use of `DPValue` here that refers to debug info, which
I've manually updated.
- llvm/tools/gold, where 'LDPV' is used as a prefix for symbol
visibility enums.
Outside of these places, I've applied several basic string
substitutions, with the intent that they only affect DbgRecord-related
identifiers; I've checked them as I went through to verify this, with
reasonable confidence that there are no unintended changes that slipped
through the cracks. The substitutions applied are all case-sensitive,
and are applied in the order shown:
```
DPValue -> DbgVariableRecord
DPVal -> DbgVarRec
DPV -> DVR
```
Following the previous rename patches, it should be the case that there
are no instances of any of these strings that are meant to refer to the
general case of DbgRecords, or anything other than the DPValue class.
The idea behind this patch is therefore that pure string substitution is
correct in all cases as long as these assumptions hold.
|
|
(#84793)
As part of the effort to rename the DbgRecord classes, this patch
renames the widely-used functions that operate on DbgRecords but refer
to DbgValues or DPValues in their names to refer to DbgRecords instead;
all such functions are defined in one of `BasicBlock.h`,
`Instruction.h`, and `DebugProgramInstruction.h`.
This patch explicitly does not change the names of any comments or
variables, except for where they use the exact name of one of the
renamed functions. The reason for this is reviewability; this patch can
be trivially examined to determine that the only changes are direct
string substitutions and any results from clang-format responding to the
changed line lengths. Future patches will cover renaming variables and
comments, and then renaming the classes themselves.
|
|
Patch 2 of 3 to add llvm.dbg.label support to the RemoveDIs project. The
patch stack adds the DPLabel class, which is the RemoveDIs llvm.dbg.label
equivalent.
1. Add DbgRecord base class for DPValue and the not-yet-added
DPLabel class.
2. Add the DPLabel class.
-> 3. Add support to passes.
The next patch, #82639, will enable conversion between dbg.labels and DPLabels.
AssignemntTrackingAnalysis support could have gone two ways:
1. Have the analysis store a DPLabel representation in its results -
SelectionDAGBuilder reads the analysis results and ignores all DbgRecord
kinds.
2. Ignore DPLabels in the analysis - SelectionDAGBuilder reads the analysis
results but still needs to iterate over DPLabels from the IR.
I went with option 2 because it's less work and is no less correct than 1. It's
worth noting that causes labels to sink to the bottom of packs of debug records.
e.g., [value, label, value] becomes [value, value, label]. This shouldn't be a
problem because labels and variable locations don't have an ordering requirement.
The ordering between variable locations is maintained and the label movement is
deterministic
|
|
Patch 1 of 3 to add llvm.dbg.label support to the RemoveDIs project. The
patch stack adds a new base class
-> 1. Add DbgRecord base class for DPValue and the not-yet-added
DPLabel class.
2. Add the DPLabel class.
3. Enable dbg.label conversion and add support to passes.
Patches 1 and 2 are NFC.
In the near future we also will rename DPValue to DbgVariableRecord and
DPLabel to DbgLabelRecord, at which point we'll overhaul the function
names too. The name DPLabel keeps things consistent for now.
|
|
There are some rare circumstances where dbg.assign intrinsics can reach
FastISel. They are a more specialised kind of dbg.value intrinsic with
more information about the originating alloca. They only occur during
optimisation, but might reach FastISel through always_inlining an
optimised function into an optnone function.
This is a slight problem as it's not safe (for debug-info accuracy) to
ignore any intrinsics, and for RemoveDIs (the intrinsic-replacement
project) it causes a crash through an unhandled switch case. To get
around this, we can just treat the dbg.assign as a dbg.value (it's an
actual subclass) and use the variable location information from the
dbg.value fields. This loses a small amount of debug-info about stack
locations, but is more accurate than just ignoring the intrinsic.
(This has popped up deep in an LTO build of a large codebase while
testing RemoveDIs, I figured it'd be good to fix it for the
intrinsic-form at the same time, just to demonstrate the correct
behaviour).
|
|
Finally addresses https://reviews.llvm.org/D148769#4311232 :)
No behavior change.
|
|
|
|
The change is fairly mechanical:
1. Factor code from `FastISel::selectIntrinsicCall`, which converts
debug intrinsics into debug instructions, into functions (NFC).
2. Call those functions for DPValues attached to instructions too.
The test updates look the same as other RemoveDIs changes: re-run the
tests with `--try-experimental-debuginfo-iterators`, which checks the
output is identical using the new debug info format (if it has been
enabled in the cmake configuration).
Depends on #76941 (otherwise some modified tests spuriously fail).
|
|
Vectors are always bit-packed and don't respect the elements' alignment
requirements. This is different from arrays. This means offsets of
vector GEPs need to be computed differently than offsets of array GEPs.
This PR fixes many places that rely on an incorrect pattern
that always relies on `DL.getTypeAllocSize(GTI.getIndexedType())`.
We replace these by usages of `GTI.getSequentialElementStride(DL)`,
which is a new helper function added in this PR.
This changes behavior for GEPs into vectors with element types for which
the (bit) size and alloc size is different. This includes two cases:
* Types with a bit size that is not a multiple of a byte, e.g. i1.
GEPs into such vectors are questionable to begin with, as some elements
are not even addressable.
* Overaligned types, e.g. i16 with 32-bit alignment.
Existing tests are unaffected, but a miscompilation of a new test is fixed.
---------
Co-authored-by: Nikita Popov <github@npopov.com>
|
|
|
|
FastISel currently drops dbg.values targeting allocas. It may seem
surprising that a simple case would fail to be lowered, but dbg.values
targeting allocas are not common; we usually have dbg.declares doing
that, and those are handled by the common code between FastISel and
SelectionDAGISel.
This patch addresses the issue by querying the static alloca map from
FuncInfo. If we have a frame index for it, we create a DBG_VALUE
intrinsic from it.
|
|
`__xray_customevent` and `__xray_typedevent` are built-in functions in Clang.
With -fxray-instrument, they are lowered to intrinsics llvm.xray.customevent and
llvm.xray.typedevent, respectively. These intrinsics are then lowered to
TargetOpcode::{PATCHABLE_EVENT_CALL,PATCHABLE_TYPED_EVENT_CALL}. The target is
responsible for generating a code sequence that calls either
`__xray_CustomEvent` (with 2 arguments) or `__xray_TypedEvent` (with 3
arguments).
Before patching, the code sequence is prefixed by a branch instruction that
skips the rest of the code sequence. After patching
(compiler-rt/lib/xray/xray_AArch64.cpp), the branch instruction becomes a NOP
and the function call will take effects.
This patch implements the lowering process for
{PATCHABLE_EVENT_CALL,PATCHABLE_TYPED_EVENT_CALL} and implements the runtime.
```
// Lowering of PATCHABLE_EVENT_CALL
.Lxray_sled_N:
b #24
stp x0, x1, [sp, #-16]!
x0 = reg of op0
x1 = reg of op1
bl __xray_CustomEvent
ldrp x0, x1, [sp], #16
```
As a result, two updated tests in compiler-rt/test/xray/TestCases/Posix/ now
pass on AArch64.
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D153320
|
|
For dbg.value intrinsics targeting an llvm::Argument address whose expression
starts with an entry value, we lower this to a DEBUG_VALUE targeting the livein
physical register corresponding to that Argument.
Depends on D151332
Differential Revision: https://reviews.llvm.org/D151333
|
|
This will make it easy to reuse these values in subsequent commits.
Depends on D151331
Differential Revision: https://reviews.llvm.org/D151332
|
|
This will make it easier to add more cases in a subsequent commit and also
better conforms to the coding guidelines.
Depends on D151330
Differential Revision: https://reviews.llvm.org/D151331
|
|
After function argument lowering, but prior to instruction selection,
dbg declares pointing to function arguments are lowered using special
logic.
Later, during instruction selection (both "fast" and regular ISel), this
logic is "repeated" in order to identify which intrinsics have already
been lowered. This is bad for two reasons:
1. The logic is not _really_ repeated, the code is different, which
could lead to duplicate lowering of the intrinsic.
2. Even if the logic were repeated properly, this is still code
duplication.
This patch addresses these issues by storing all preprocessed
dbg.declare intrinsics in a set inside FuncInfo; the set is queried upon
instruction selection.
Differential Revision: https://reviews.llvm.org/D149682
|
|
This is rework of;
- rG13e77db2df94 (r328395; MVT)
Since `LowLevelType.h` has been restored to `CodeGen`, `MachinveValueType.h`
can be restored as well.
Depends on D148767
Differential Revision: https://reviews.llvm.org/D149024
|
|
There's additional cases we can cleanup (mainly in target code), but this tries to cleanup generic code and PPC which had an equivalent helper.
|
|
The new methods return a range for easier iteration. Use them everywhere
instead of getImplicitUses, getNumImplicitUses, getImplicitDefs and
getNumImplicitDefs. A future patch will remove the old methods.
In some use cases the new methods are less efficient because they always
have to scan the whole uses/defs array to count its length, but that
will be fixed in a future patch by storing the number of implicit
uses/defs explicitly in MCInstrDesc. At that point there will be no need
to 0-terminate the arrays.
Differential Revision: https://reviews.llvm.org/D142215
|
|
Add a flag state (and a MIR key) to MachineFunctions indicating whether they
contain instruction referencing debug-info or not. Whether DBG_VALUEs or
DBG_INSTR_REFs are used needs to be determined by LiveDebugValues at least, and
using the current optimisation level as a proxy is proving unreliable.
Test updates are purely adding the flag to tests, in a couple of cases it
involves separating out VarLocBasedLDV/InstrRefBasedLDV tests into separate
files, as they can no longer share the same input.
Differential Revision: https://reviews.llvm.org/D141387
|
|
This was intended to skip past the EH_LABEL which is added at the top
of a landingpad block. But, it is unnecessary because `LastLocalValue`
is already set to point past the EH_LABEL in that case.
Thus, currently, this is dead-code. I am removing it because it _also_
attempts to skip over EH_LABELs emitted around a call. Currently, this
situation never arises, but it becomes harmful after a future
in-progress commit.
|
|
This patch modifies SelectionDAG and FastISel to produce DBG_INSTR_REFs with
variadic expressions, and produce DBG_INSTR_REFs for debug values with variadic
location expressions. The former essentially means just prepending
DW_OP_LLVM_arg, 0 to the existing expression. The latter is achieved in
MachineFunction::finalizeDebugInstrRefs and InstrEmitter::EmitDbgInstrRef.
Reviewed By: jmorse, Orlando
Differential Revision: https://reviews.llvm.org/D133929
|
