| Age | Commit message (Collapse) | Author |
|---|
|
This patch makes two notable changes to the MIR debug info representation,
which result in different MIR output but identical final DWARF output (NFC
w.r.t. the full compilation). The two changes are:
* The introduction of a new MachineOperand type, MO_DbgInstrRef, which
consists of two unsigned numbers that are used to index an instruction
and an output operand within that instruction, having a meaning
identical to first two operands of the current DBG_INSTR_REF
instruction. This operand is only used in DBG_INSTR_REF (see below).
* A change in syntax for the DBG_INSTR_REF instruction, shuffling the
operands to make it resemble DBG_VALUE_LIST instead of DBG_VALUE,
and replacing the first two operands with a single MO_DbgInstrRef-type
operand.
This patch is the first of a set that will allow DBG_INSTR_REF
instructions to refer to multiple machine locations in the same manner
as DBG_VALUE_LIST.
Reviewed By: jmorse
Differential Revision: https://reviews.llvm.org/D129372
|
|
Currently the instruction referencing live debug values has 3 separate
places where we iterate over all known locations to find the best machine
location for a set of values at a given point in the program. Each of these
places has an implementation of this check, and one of them has slightly
different logic to the others. This patch moves the check for the "quality"
of a machine location into a separate function, which also avoids repeatedly
calling expensive functions, giving a slight performance improvement.
Differential Revision: https://reviews.llvm.org/D140412
|
|
This patch adds a new function that can be used to check all the
properties, other than the machine values, of a pair of debug values for
equivalence. This is done by folding the "directness" into the
expression, converting the expression to variadic form if it is not
already in that form, and then comparing directly. In a few places which
check whether two debug values are identical to see if their ranges can
be merged, this function will correctly identify cases where two debug
values are expressed differently but have the same meaning, allowing
those ranges to be correctly merged.
Differential Revision: https://reviews.llvm.org/D136173
|
|
|
|
This is part of an effort to migrate from llvm::Optional to
std::optional:
https://discourse.llvm.org/t/deprecating-llvm-optional-x-hasvalue-getvalue-getvalueor/63716
|
|
This patch mechanically replaces None with std::nullopt where the
compiler would warn if None were deprecated. The intent is to reduce
the amount of manual work required in migrating from Optional to
std::optional.
This is part of an effort to migrate from llvm::Optional to
std::optional:
https://discourse.llvm.org/t/deprecating-llvm-optional-x-hasvalue-getvalue-getvalueor/63716
|
|
This is part of an effort to migrate from llvm::Optional to
std::optional:
https://discourse.llvm.org/t/deprecating-llvm-optional-x-hasvalue-getvalue-getvalueor/63716
|
|
|
|
Re-landing with an erroneous assert removed.
This reverts commit 58d104b352a65bec3fb7a8fd23bf2d408b4c76f7.
|
|
Reverting due to reported errors when running Linux kernel builds with
KMSAN -gdwarf-4.
This reverts commit 2cb9e1ac422f46de0ab728c6c9d50ebafbfe372a.
|
|
This patch builds on prior support patches to enable support for
variadic debug values in InstrRefLDV, allowing DBG_VALUE_LISTs to
have their ranges extended.
Differential Revision: https://reviews.llvm.org/D128212
|
|
This patch adds the last of the changes required to enable
DBG_VALUE_LIST handling in InstrRefLDV, handling variadic debug values
during the transfer tracking step. Most of the changes are fairly
straightforward, and based around tracking multiple locations per
variable in TransferTracker::VLocTracker.
Differential Revision: https://reviews.llvm.org/D128211
|
|
In preparation for supporting DBG_VALUE_LIST in InstrRefLDV, this patch
adds the logic for emitting DBG_VALUE_LIST instructions from
InstrRefLDV. The logical changes here are fairly simple, with the main
change being that instead of directly prepending offsets to the DIExpr,
we use appendOpsToArg to modify the expression for individual debug
operands in the expression. The function emitLoc is also changed to take
a list of debug ops, with an empty list meaning an undef value.
Differential Revision: https://reviews.llvm.org/D128209
|
|
In preparation for adding support for DBG_VALUE_LIST instructions in
InstrRefLDV, this patch updates the logic for joining variables at block
joins to support joining variables that use multiple debug operands.
This is one of the more meaty "logical" changes, although the line count
isn't too high - this changes pickVPHILoc to find a valid joined
location for every operand, with part of the function being split off
into pickValuePHILoc which finds a location for a single operand.
Differential Revision: https://reviews.llvm.org/D128180
|
|
In preparation for allowing InstrRefBasedLDV to handle DBG_VALUE_LIST,
this patch updates the internal representation that it uses to represent
debug values to store a list of values. This is one of the more
significant changes in terms of line count, but is fairly simple and
should not affect the output of this pass.
Differential Revision: https://reviews.llvm.org/D128177
|
|
Currently, InstrRefLDV only handles DBG_VALUE instructions, not
DBG_VALUE_LIST, and as a result of this it handles these instructions
using functions that only work for that type of debug value, i.e. using
getOperand(0) to get the debug operand. This patch changes this to use
the generic debug value functions, such as getDebugOperand and
isDebugOffsetImm, as well as adding an IsVariadic field to the
DbgValueProperties class and a few other minor changes to acknowledge
DBG_VALUE_LISTs. Note that this patch does not add support for
DBG_VALUE_LIST here, but is a precursor to other patches that do add
that support.
Differential Revision: https://reviews.llvm.org/D128174
|
|
In the InstrRefBasedImpl for LiveDebugValues, we attempt to propagate
debug values through basic blocks in part by checking to see whether all
a variable's incoming debug values to a BB "agree", i.e. whether their
properties match and they refer to the same underlying value.
Prior to this patch, the check for agreement between incoming values
relied on exact equality, which meant that a VPHI and a Def DbgValue
that referred to the same underlying value would be seen as disagreeing.
This patch changes this behaviour to treat them as referring to the same
value, allowing the shared value to propagate into the BB.
Differential Revision: https://reviews.llvm.org/D125953
|
|
|
|
This is a follow-up patch to D130999. In the test, the MIR contains an
unreachable MBB but the code attempts to look it up in MLocs. This
patch fixes this issue by checking for the default-constructed value.
rdar://97226240
Differential Revision: https://reviews.llvm.org/D131453
|
|
|
|
The testcase was delta-reduced from an LTO build with sanitizer
coverage and the MIR tail duplication pass caused a machine basic
block to become unreachable in MIR. This caused the MBB to be invisible
to the reverse post-order traversal used to initialize the MBB <->
RPONumber lookup tables.
rdar://97226240
Differential Revision: https://reviews.llvm.org/D130999
|
|
|
|
Identified with modernize-redundant-void-arg.
|
|
llvm::sort is beneficial even when we use the iterator-based overload,
since it can optionally shuffle the elements (to detect
non-determinism). However llvm::sort is not usable everywhere, for
example, in compiler-rt.
Reviewed By: nhaehnle
Differential Revision: https://reviews.llvm.org/D130406
|
|
|
|
Currently, an error exists when InstrRefBasedLDV observes transfers of
variables across copies, which causes it to lose track of variables
under certain circumstances, resulting in shorter lifetimes for those
variables as LDV gives up searching for live locations for them. This
patch fixes this issue by storing the currently tracked values in
the destination first, then updating them manually later without
clobbering or assigning them the wrong value.
Differential Revision: https://reviews.llvm.org/D128101
|
|
|
|
This is a re-apply of D123599, which was reverted in 4fe2ab5279408, now
with a more appropriate assertion. Original commit message follow:
InstrRefBasedLDV can track and describe variable values that are spilt to
the stack -- however it does not current describe the size of the value on
the stack. This can cause uninitialized bytes to be read from the stack if
a small register is spilt for a larger variable, or theoretically on
big-endian machines if a large value on the stack is used for a small
variable.
Fix this by using DW_OP_deref_size to specify the amount of data to load
from the stack, if there's any possibility for ambiguity. There are a few
scenarios where this can be omitted (such as when using DW_OP_piece and a
non-DW_OP_stack_value location), see deref-spills-with-size.mir for an
explicit table of inputs flavours and output expressions.
Differential Revision: https://reviews.llvm.org/D123599
|
|
This reverts commit a15b66e76d1ecff625a4bbb4a46ff83a43138f49.
This causes linker to crash at assertion: `Assertion failed: !Expr->isComplex(), file C:\b\s\w\ir\cache\builder\src\third_party\llvm\llvm\lib\CodeGen\LiveDebugValues\InstrRefBasedImpl.cpp, line 907`.
|
|
InstrRefBasedLDV can track and describe variable values that are spilt to
the stack -- however it does not current describe the size of the value on
the stack. This can cause uninitialized bytes to be read from the stack if
a small register is spilt for a larger variable, or theoretically on
big-endian machines if a large value on the stack is used for a small
variable.
Fix this by using DW_OP_deref_size to specify the amount of data to load
from the stack, if there's any possibility for ambiguity. There are a few
scenarios where this can be omitted (such as when using DW_OP_piece and a
non-DW_OP_stack_value location), see deref-spills-with-size.mir for an
explicit table of inputs flavours and output expressions.
Differential Revision: https://reviews.llvm.org/D123599
|
|
This was reverted twice, in 987cd7c3ed75b and 13815e8cbf8d4. The latter
stemed from not accounting for rare register classes in a pre-allocated
array, and the former from an array not being completely initialized,
leading to asan complaining.
|
|
This reverts commit 5db925023169f8a19419e68153682d1e518f8392.
Further to the early revert, the sanitizers have found something wrong with
this.
|
|
This was applied in fda4305e53784, reverted in 13815e8cbf8d49, the problem
was that fp80 X86 registers that were spilt to the stack aren't expected by
LiveDebugValues. It pre-allocates a position number for all register sizes
that can be spilt, and 80 bits isn't exactly common.
The solution is to scan the register classes to find any unrecognised
register sizes, adn pre-allocate those position numbers, avoiding a later
assertion.
|
|
This reverts commit fda4305e5378478051be225248bfe9c1d401d938.
Green dragon has spotted a problem -- it's understood, but might be fiddly
to fix, reverting in the meantime.
|
|
DBG_PHI instructions can refer to stack slots, to indicate that multiple
values merge together on control flow joins in that slot. This is fine --
however the slot might be merged at a later date with a slot of a different
size. In doing so, we lose information about the size the eliminated PHI.
Later analysis passes have to guess.
Improve this by attaching an optional "bit size" operand to DBG_PHI, which
only gets added for stack slots, to let us know how large a size the value
on the stack is.
Differential Revision: https://reviews.llvm.org/D124184
|
|
This patch adjusts what location is picked for a known variable value --
preferring to leave locations on the stack, even when a value is re-loaded
into a register. The benefit is reduced location list entropy, on a
clang-3.4 build I found that .debug_loclists reduces in size by 6%, from
29Mb down to 27Mb.
Testing: a few tests need the stack slot to be written to explicitly, to
force LiveDebugValues into restoring the variable location to a register.
I've added an explicit test for the desired behaviour in
livedebugvalues_recover_clobbers.mir .
Differential Revision: https://reviews.llvm.org/D120732
|
|
This is a (fixed) recommit of https://reviews.llvm.org/D121169
after: 1061034926
before: 1063332844
Discourse thread: https://discourse.llvm.org/t/include-what-you-use-include-cleanup
Differential Revision: https://reviews.llvm.org/D121681
|
|
This reverts commit 7f230feeeac8a67b335f52bd2e900a05c6098f20.
Breaks CodeGenCUDA/link-device-bitcode.cu in check-clang,
and many LLVM tests, see comments on https://reviews.llvm.org/D121169
|
|
after: 1061034926
before: 1063332844
Differential Revision: https://reviews.llvm.org/D121169
|
|
InstrRefBasedLDV allocates some big tables of ValueIDNum, to store live-in
and live-out block values in, that then get passed around as pointers
everywhere. This patch wraps the allocation in a std::unique_ptr, names
some types based on unique_ptr, and passes references to those around
instead. There's no functional change, but it makes it clearer to the
reader that references to these tables are borrowed rather than owned, and
we get some extra validity assertions too.
Differential Revision: https://reviews.llvm.org/D118774
|
|
It's inevitable that optimisation passes will fail to update debug-info:
when that happens, it's best if the compiler doesn't crash as a result.
Therefore, downgrade a few assertions / failure modes that would crash
when illegal debug-info was seen, to instead drop variable locations. In
practice this means that an instruction reference to a nonexistant or
illegal operand should be tolerated.
Differential Revision: https://reviews.llvm.org/D118998
|
|
Identified with modernize-use-equals-default
|
|
This patch is a sticking-paster until D118774 solves the situation with
unique_ptrs. I'm certainly wishing I'd focused on that first X_X.
|
|
Gaps in the basic block number range (from blocks being deleted or folded)
get block-value-tables allocated but never ejected, leading to a memory
leak, currently tripping up the asan buildbots. Fix this up by manually
freeing that memory.
As suggested elsewhere, if these things were owned by a unique_ptr then
cleanup would happen automagically. D118774 should eliminate the need for
this dance.
|
|
This is a follow-up to D117877: variable assignments of DBG_VALUE $noreg,
or DBG_INSTR_REFs where no value can be found, are represented by a
DbgValue object with Kind "Undef", explicitly meaning "there is no value".
In D117877 I added a special-case to some assignment accounting faster,
without considering this scenario. It causes variables to be given the
value ValueIDNum::EmptyValue, which then ends up being a DenseMap key. The
DenseMap asserts, because EmptyValue is the tombstone key.
Fix this by handling the assign-undef scenario in the special case, to
match what happens in the general case: the variable has no value if it's
only ever assigned $noreg / undef.
Differential Revision: https://reviews.llvm.org/D118715
|
|
This patch aims to reduce max-rss from instruction referencing, by avoiding
keeping variable value information in memory for too long. Instead of
computing all the variable values then emitting them to DBG_VALUE
instructions, this patch tries to stream the information out through a
depth first search:
* Make use of the fact LexicalScopes gives a depth-number to each lexical
scope,
* Produce a map that identifies the last lexical scope to make use of a
block,
* Enumerate each scope in LexicalScopes' DFS order, solving the variable
value problem,
* After each scope is processed, look for any blocks that won't be used by
any other scope, and emit all the variable information to DBG_VALUE
instructions.
Differential Revision: https://reviews.llvm.org/D118460
|
|
This patch releases some memory from InstrRefBasedLDV earlier that it would
otherwise. The underlying problem is:
* We store a big table of "live in values for each block",
* We translate that into DBG_VALUE instructions in each block,
And both exist in memory at the same time, which needlessly doubles that
information. The most of what this patch does is: as we progressively
translate live-in information into DBG_VALUEs, we free the variable-value /
machine-value tracking information as we go, which significantly reduces
peak memory.
While I'm here, also add a clear method to wipe variable assignments that
have been accumulated into VLocTracker objects, and turn a DenseMap into
a SmallDenseMap to avoid an initial allocation.
Differential Revision: https://reviews.llvm.org/D118453
|
|
Install a cache of DBG_INSTR_REF -> ValueIDNum resolutions, for scenarios
where the value has to be reconstructed from several DBG_PHIs. Whenever
this happens, it's because branch folding + tail duplication has messed
with the SSA form of the program, and we have to solve a mini SSA problem
to find the variable value. This is always called twice, so it makes sense
to cache the value.
This gives a ~0.5% geomean compile-time-performance improvement on CTMark.
Differential Revision: https://reviews.llvm.org/D118455
|
|
Was reverted in 1c1b670a73a9 as it broke all non-x86 bots. Original commit
message:
[DebugInfo][InstrRef] Add a max-stack-slots-to-track cut-out
In certain circumstances with things like autogenerated code and asan, you
can end up with thousands of Values live at the same time, causing a large
working set and a lot of information spilled to the stack. Unfortunately
InstrRefBasedLDV doesn't cope well with this and consumes a lot of memory
when there are many many stack slots. See the reproducer in D116821.
It seems very unlikely that a developer would be able to reason about
hundreds of live named local variables at the same time, so a huge working
set and many stack slots is an indicator that we're likely analysing
autogenerated or instrumented code. In those cases: gracefully degrade by
setting an upper bound on the amount of stack slots to track. This limits
peak memory consumption, at the cost of dropping some variable locations,
but in a rare scenario where it's unlikely someone is actually going to
use them.
In terms of the patch, this adds a cl::opt for max number of stack slots to
track, and has the stack-slot-numbering code optionally return None. That
then filters through a number of code paths, which can then chose to not
track a spill / restore if it touches an untracked spill slot. The added
test checks that we drop variable locations that are on the stack, if we
set the limit to zero.
Differential Revision: https://reviews.llvm.org/D118601
|
|
This reverts commit 3fab2d138e30c65249e1eaea6cc68b2b7f50955a.
Breaking PPC sanitizer build:
https://lab.llvm.org/buildbot/#/builders/105/builds/20857
|
