| Age | Commit message (Collapse) | Author |
|---|
|
* Changes the default synthetic symbol names to contain their file
address
This is a new PR after the first PR (#137512) was reverted because it
didn't update the way unnamed symbols were searched in the symbol table,
which relied on the index being in the name.
This time also added extra test to make sure the symbol is found as
expected
|
|
This reverts commit b69957fa642635f769c3aa33a539f74497df0b4d.
|
|
Changes the default synthetic symbol names to contain their file address
|
|
Add the ability to override the disassembly CPU and CPU features through
a target setting (`target.disassembly-cpu` and
`target.disassembly-features`) and a `disassemble` command option
(`--cpu` and `--features`).
This is especially relevant for architectures like RISC-V which relies
heavily on CPU extensions.
The majority of this patch is plumbing the options through. I recommend
looking at DisassemblerLLVMC and the test for the observable change in
behavior.
|
|
For the significant amount of call sites that want to create an
incontrovertible error, such a wrapper function creates a significant
readability improvement and lowers the cost of entry to add error
handling in more places.
|
|
Follow-up to #69422.
This PR puts all the highlighting settings into a single struct for
easier handling
Co-authored-by: Talha Tahir <talha.tahir@10xengineers.ai>
|
|
This patch replaces uses of StringRef::{starts,ends}with with
StringRef::{starts,ends}_with for consistency with
std::{string,string_view}::{starts,ends}_with in C++20.
I'm planning to deprecate and eventually remove
StringRef::{starts,ends}with.
|
|
This adds some checks missed by c90cb6eee8296953c097fcc9fc6e61f739c0dad3,
probably because some tests only run on certain platforms.
|
|
Fixes https://github.com/llvm/llvm-project/issues/57372
Previously some work has already been done on this. A PR was generated
but it remained in review:
https://reviews.llvm.org/D136462
In short previous approach was following:
Changing the symbol names (making the searched part colorized) ->
printing them -> restoring the symbol names back in their original form.
The reviewers suggested that instead of changing the symbol table, this
colorization should be done in the dump functions itself. Our strategy
involves passing the searched regex pattern to the existing dump
functions responsible for printing information about the searched
symbol. This pattern is propagated until it reaches the line in the dump
functions responsible for displaying symbol information on screen.
At this point, we've introduced a new function called
"PutCStringColorHighlighted," which takes the searched pattern, a prefix and suffix,
and the text and applies colorization to highlight the pattern in the
output. This approach aims to streamline the symbol search process to
improve readability of search results.
Co-authored-by: José L. Junior <josejunior@10xengineers.ai>
|
|
Re-lands 04aa943be8ed5c03092e2a90112ac638360ec253 with modifications
to fix tests.
I originally reverted this because it caused a test to fail on Linux.
The problem was that I inverted a condition on accident.
|
|
This reverts commit 04aa943be8ed5c03092e2a90112ac638360ec253.
This broke the debian buildbot and I'm not sure why. Reverting so I can
investigate.
|
|
There are many situations where we'll iterate over a SymbolContextList
with the pattern:
```
SymbolContextList sc_list;
// Fill in sc_list here
for (auto i = 0; i < sc_list.GetSize(); i++) {
SymbolContext sc;
sc_list.GetSymbolAtContext(i, sc);
// Do work with sc
}
```
Adding an iterator to iterate over the instances directly means we don't
have to do bounds checking or create a copy of every element of the
SymbolContextList.
Differential Revision: https://reviews.llvm.org/D149900
|
|
Introduce a new object and symbol file format with the goal of mapping
addresses to symbol names. I'd like to think of is as an extremely
simple textual symtab. The file format consists of a triple, a UUID and
a list of symbols. JSON is used for the encoding, but that's mostly an
implementation detail. The goal of the format was to be simple and human
readable.
The new file format is motivated by two use cases:
- Stripped binaries: when a binary is stripped, you lose the ability to
do thing like setting symbolic breakpoints. You can keep the
unstripped binary around, but if all you need is the stripped
symbols then that's a lot of overhead. Instead, we could save the
stripped symbols to a file and load them in the debugger when
needed. I want to extend llvm-strip to have a mode where it emits
this new file format.
- Interactive crashlogs: with interactive crashlogs, if we don't have
the binary or the dSYM for a particular module, we currently show an
unnamed symbol for those frames. This is a regression compared to the
textual format, that has these frames pre-symbolicated. Given that
this information is available in the JSON crashlog, we need a way to
tell LLDB about it. With the new symbol file format, we can easily
synthesize a symbol file for each of those modules and load them to
symbolicate those frames.
Here's an example of the file format:
{
"triple": "arm64-apple-macosx13.0.0",
"uuid": "36D0CCE7-8ED2-3CA3-96B0-48C1764DA908",
"symbols": [
{
"name": "main",
"type": "code",
"size": 32,
"address": 4294983568
},
{
"name": "foo",
"type": "code",
"size": 8,
"address": 4294983560
}
]
}
Differential revision: https://reviews.llvm.org/D145180
|
|
Symbols that have the section index of SHN_ABS were previously creating extra top level sections that contained the value of the symbol as if the symbol's value was an address. As far as I can tell, these symbol's values are not addresses, even if they do have a size. To make matters worse, adding these extra sections can stop address lookups from succeeding if the symbol's value + size overlaps with an existing section as these sections get mapped into memory when the image is loaded by the dynamic loader. This can cause stack frames to appear empty as the address lookup fails completely.
This patch:
- doesn't create a section for any SHN_ABS symbols
- makes symbols that are absolute have values that are not addresses
- add accessors to SBSymbol to get the value and size of a symbol as raw integers. Prevoiusly there was no way to access a symbol's value from a SBSymbol because the only accessors were:
SBAddress SBSymbol::GetStartAddress();
SBAddress SBSymbol::GetEndAddress();
and these accessors would return an invalid SBAddress if the symbol's value wasn't an address
- Adds a test to ensure no ".absolute.<symbol-name>" sections are created
- Adds a test to test the new SBSymbol APIs
Differential Revision: https://reviews.llvm.org/D131705
|
|
caching of resolved/absolute.
Resubmission of https://reviews.llvm.org/D130309 with the 2 patches that fixed the linux buildbot, and new windows fixes.
The FileSpec APIs allow users to modify instance variables directly by getting a non const reference to the directory and filename instance variables. This makes it impossible to control all of the times the FileSpec object is modified so we can clear cached member variables like m_resolved and with an upcoming patch caching if the file is relative or absolute. This patch modifies the APIs of FileSpec so no one can modify the directory or filename instance variables directly by adding set accessors and by removing the get accessors that are non const.
Many clients were using FileSpec::GetCString(...) which returned a unique C string from a ConstString'ified version of the result of GetPath() which returned a std::string. This caused many locations to use this convenient function incorrectly and could cause many strings to be added to the constant string pool that didn't need to. Most clients were converted to using FileSpec::GetPath().c_str() when possible. Other clients were modified to use the newly renamed version of this function which returns an actualy ConstString:
ConstString FileSpec::GetPathAsConstString(bool denormalize = true) const;
This avoids the issue where people were getting an already uniqued "const char *" that came from a ConstString only to put the "const char *" back into a "ConstString" object. By returning the ConstString instead of a "const char *" clients can be more efficient with the result.
The patch:
- Removes the non const GetDirectory() and GetFilename() get accessors
- Adds set accessors to replace the above functions: SetDirectory() and SetFilename().
- Adds ClearDirectory() and ClearFilename() to replace usage of the FileSpec::GetDirectory().Clear()/FileSpec::GetFilename().Clear() call sites
- Fixed all incorrect usage of FileSpec::GetCString() to use FileSpec::GetPath().c_str() where appropriate, and updated other call sites that wanted a ConstString to use the newly returned ConstString appropriately and efficiently.
Differential Revision: https://reviews.llvm.org/D130549
|
|
adding caching of resolved/absolute." and follow-ups
This reverts commit 9429b67b8e300e638d7828bbcb95585f85c4df4d.
It broke the build on Windows, see comments on https://reviews.llvm.org/D130309
It also reverts these follow-ups:
Revert "Fix buildbot breakage after https://reviews.llvm.org/D130309."
This reverts commit f959d815f4637890ebbacca379f1c38ab47e4e14.
Revert "Fix buildbot breakage after https://reviews.llvm.org/D130309."
This reverts commit 0bbce7a4c2d2bff622bdadd4323f93f5d90e6d24.
Revert "Cache the value for absolute path in FileSpec."
This reverts commit dabe877248b85b34878e75d5510339325ee087d0.
|
|
caching of resolved/absolute.
The FileSpect APIs allow users to modify instance variables directly by getting a non const reference to the directory and filename instance variables. This makes it impossibly to control all of the times the FileSpec object is modified so we can clear the cache. This patch modifies the APIs of FileSpec so no one can modify the directory or filename directly by adding set accessors and by removing the get accessors that are non const.
Many clients were using FileSpec::GetCString(...) which returned a unique C string from a ConstString'ified version of the result of GetPath() which returned a std::string. This caused many locations to use this convenient function incorrectly and could cause many strings to be added to the constant string pool that didn't need to. Most clients were converted to using FileSpec::GetPath().c_str() when possible. Other clients were modified to use the newly renamed version of this function which returns an actualy ConstString:
ConstString FileSpec::GetPathAsConstString(bool denormalize = true) const;
This avoids the issue where people were getting an already uniqued "const char *" that came from a ConstString only to put the "const char *" back into a "ConstString" object. By returning the ConstString instead of a "const char *" clients can be more efficient with the result.
The patch:
- Removes the non const GetDirectory() and GetFilename() get accessors
- Adds set accessors to replace the above functions: SetDirectory() and SetFilename().
- Adds ClearDirectory() and ClearFilename() to replace usage of the FileSpec::GetDirectory().Clear()/FileSpec::GetFilename().Clear() call sites
- Fixed all incorrect usage of FileSpec::GetCString() to use FileSpec::GetPath().c_str() where appropriate, and updated other call sites that wanted a ConstString to use the newly returned ConstString appropriately and efficiently.
Differential Revision: https://reviews.llvm.org/D130309
|
|
To build complex binding upon instruction trace, additional metadata 'instruction type' is needed.
This diff has followings:
- Add a flag -k / --kind for instruction dump
- Remove SetGranularity and SetIgnoreErros from Trace cursor
Sample output:
```
(lldb) thread trace dump instruction -k
thread #1: tid = 3198805
libc.so.6`_IO_puts + 356
2107: 0x00007ffff7163594 ( return) retq
2106: 0x00007ffff7163592 ( other) popq %r13
2105: 0x00007ffff7163590 ( other) popq %r12
2104: 0x00007ffff716358f ( other) popq %rbp
2103: 0x00007ffff716358e ( other) popq %rbx
2102: 0x00007ffff716358c ( other) movl %ebx, %eax
2101: 0x00007ffff7163588 ( other) addq $0x8, %rsp
2100: 0x00007ffff7163570 ( cond jump) je 0x89588 ; <+344>
2099: 0x00007ffff716356e ( other) decl (%rdx)
2098: 0x00007ffff7163565 ( cond jump) je 0x8956e ; <+318>
2097: 0x00007ffff716355e ( other) cmpl $0x0, 0x33c02b(%rip) ; __libc_multiple_threads
2096: 0x00007ffff7163556 ( other) movq $0x0, 0x8(%rdx)
2095: 0x00007ffff7163554 ( cond jump) jne 0x89588 ; <+344>
2094: 0x00007ffff7163550 ( other) subl $0x1, 0x4(%rdx)
2093: 0x00007ffff7163549 ( other) movq 0x88(%rbp), %rdx
2092: 0x00007ffff7163547 ( cond jump) jne 0x89588 ; <+344>
2091: 0x00007ffff7163540 ( other) testl $0x8000, (%rbp) ; imm = 0x8000
2090: 0x00007ffff716353c ( other) cmovaq %rax, %rbx
2089: 0x00007ffff7163535 ( other) cmpq $0x7fffffff, %rbx ; imm = 0x7FFFFFFF
2088: 0x00007ffff7163530 ( other) movl $0x7fffffff, %eax ; imm = 0x7FFFFFFF
```
Reviewed By: wallace
Differential Revision: https://reviews.llvm.org/D128477
|
|
Applied modernize-use-default-member-init clang-tidy check over LLDB.
It appears in many files we had already switched to in class member init but
never updated the constructors to reflect that. This check is already present in
the lldb/.clang-tidy config.
Differential Revision: https://reviews.llvm.org/D121481
|
|
This is a re-submission of 24d240558811604354a8d6080405f6bad8d15b5c
without the hunks in HostNativeThreadBase.{h,cpp}, which break builds
on Windows.
Identified with modernize-use-nullptr.
|
|
This reverts commit 913457acf07be7f22d71ac41ad1076517d7f45c6.
It again broke builds on Windows:
lldb/source/Host/common/HostNativeThreadBase.cpp(37,14): error:
assigning to 'lldb::thread_result_t' (aka 'unsigned int') from
incompatible type 'std::nullptr_t'
|
|
This is a re-submission of 24d240558811604354a8d6080405f6bad8d15b5c
without the hunk in HostNativeThreadBase.h, which breaks builds on
Windows.
Identified with modernize-use-nullptr.
|
|
This reverts commit 24d240558811604354a8d6080405f6bad8d15b5c.
Breaks building on Windows:
../../lldb/include\lldb/Host/HostNativeThreadBase.h(49,36): error:
cannot initialize a member subobject of type 'lldb::thread_result_t'
(aka 'unsigned int') with an rvalue of type 'std::nullptr_t'
lldb::thread_result_t m_result = nullptr;
^~~~~~~
1 error generated.
|
|
Identified with modernize-use-nullptr.
|
|
sessions to start faster.
This is an updated version of the https://reviews.llvm.org/D113789 patch with the following changes:
- We no longer modify modification times of the cache files
- Use LLVM caching and cache pruning instead of making a new cache mechanism (See DataFileCache.h/.cpp)
- Add signature to start of each file since we are not using modification times so we can tell when caches are stale and remove and re-create the cache file as files are changed
- Add settings to control the cache size, disk percentage and expiration in days to keep cache size under control
This patch enables symbol tables to be cached in the LLDB index cache directory. All cache files are in a single directory and the files use unique names to ensure that files from the same path will re-use the same file as files get modified. This means as files change, their cache files will be deleted and updated. The modification time of each of the cache files is not modified so that access based pruning of the cache can be implemented.
The symbol table cache files start with a signature that uniquely identifies a file on disk and contains one or more of the following items:
- object file UUID if available
- object file mod time if available
- object name for BSD archive .o files that are in .a files if available
If none of these signature items are available, then the file will not be cached. This keeps temporary object files from expressions from being cached.
When the cache files are loaded on subsequent debug sessions, the signature is compare and if the file has been modified (uuid changes, mod time changes, or object file mod time changes) then the cache file is deleted and re-created.
Module caching must be enabled by the user before this can be used:
symbols.enable-lldb-index-cache (boolean) = false
(lldb) settings set symbols.enable-lldb-index-cache true
There is also a setting that allows the user to specify a module cache directory that defaults to a directory that defaults to being next to the symbols.clang-modules-cache-path directory in a temp directory:
(lldb) settings show symbols.lldb-index-cache-path
/var/folders/9p/472sr0c55l9b20x2zg36b91h0000gn/C/lldb/IndexCache
If this setting is enabled, the finalized symbol tables will be serialized and saved to disc so they can be quickly loaded next time you debug.
Each module can cache one or more files in the index cache directory. The cache file names must be unique to a file on disk and its architecture and object name for .o files in BSD archives. This allows universal mach-o files to support caching multuple architectures in the same module cache directory. Making the file based on the this info allows this cache file to be deleted and replaced when the file gets updated on disk. This keeps the cache from growing over time during the compile/edit/debug cycle and prevents out of space issues.
If the cache is enabled, the symbol table will be loaded from the cache the next time you debug if the module has not changed.
The cache also has settings to control the size of the cache on disk. Each time LLDB starts up with the index cache enable, the cache will be pruned to ensure it stays within the user defined settings:
(lldb) settings set symbols.lldb-index-cache-expiration-days <days>
A value of zero will disable cache files from expiring when the cache is pruned. The default value is 7 currently.
(lldb) settings set symbols.lldb-index-cache-max-byte-size <size>
A value of zero will disable pruning based on a total byte size. The default value is zero currently.
(lldb) settings set symbols.lldb-index-cache-max-percent <percentage-of-disk-space>
A value of 100 will allow the disc to be filled to the max, a value of zero will disable percentage pruning. The default value is zero.
Reviewed By: labath, wallace
Differential Revision: https://reviews.llvm.org/D115324
|
|
The Swift stdlib uses absolute symbols in the dylib to communicate
feature flags to the process. LLDB's expression evaluator needs to be
able to find them. This wires up absolute symbols so they show up in
the symtab lookup command, which is also all that's needed for them to
be visible to the expression evaluator JIT.
rdar://85093828
Differential Revision: https://reviews.llvm.org/D113445
|
|
startup times.
This is a resubmission of https://reviews.llvm.org/D105160 after fixing testing issues.
This fix was created after profiling the target creation of a large C/C++/ObjC application that contained almost 4,000,000 redacted symbol names. The symbol table parsing code was creating names for each of these synthetic symbols and adding them to the name indexes. The code was also adding the object file basename to the end of the symbol name which doesn't allow symbols from different shared libraries to share the names in the constant string pool.
Prior to this fix this was creating 180MB of "___lldb_unnamed_symbol" symbol names and was taking a long time to generate each name, add them to the string pool and then add each of these names to the name index.
This patch fixes the issue by:
not adding a name to synthetic symbols at creation time, and allows name to be dynamically generated when accessed
doesn't add synthetic symbol names to the name indexes, but catches this special case as name lookup time. Users won't typically set breakpoints or lookup these synthetic names, but support was added to do the lookup in case it does happen
removes the object file baseanme from the generated names to allow the names to be shared in the constant string pool
Prior to this fix the startup times for a large application was:
12.5 seconds (cold file caches)
8.5 seconds (warm file caches)
After this fix:
9.7 seconds (cold file caches)
5.7 seconds (warm file caches)
The names of the symbols are auto generated by appending the symbol's UserID to the end of the "___lldb_unnamed_symbol" string and is only done when the name is requested from a synthetic symbol if it has no name.
Differential Revision: https://reviews.llvm.org/D106837
|
|
consumption and startup times."
This reverts commit c8164d0276b97679e80db01adc860271ab4a5d11 and
43f6dad2344247976d5777f56a1fc29e39c6c717 because it breaks
TestDyldTrieSymbols.py on GreenDragon.
|
|
startup times.
This fix was created after profiling the target creation of a large C/C++/ObjC application that contained almost 4,000,000 redacted symbol names. The symbol table parsing code was creating names for each of these synthetic symbols and adding them to the name indexes. The code was also adding the object file basename to the end of the symbol name which doesn't allow symbols from different shared libraries to share the names in the constant string pool.
Prior to this fix this was creating 180MB of "___lldb_unnamed_symbol" symbol names and was taking a long time to generate each name, add them to the string pool and then add each of these names to the name index.
This patch fixes the issue by:
- not adding a name to synthetic symbols at creation time, and allows name to be dynamically generated when accessed
- doesn't add synthetic symbol names to the name indexes, but catches this special case as name lookup time. Users won't typically set breakpoints or lookup these synthetic names, but support was added to do the lookup in case it does happen
- removes the object file baseanme from the generated names to allow the names to be shared in the constant string pool
Prior to this fix the startup times for a large application was:
12.5 seconds (cold file caches)
8.5 seconds (warm file caches)
After this fix:
9.7 seconds (cold file caches)
5.7 seconds (warm file caches)
The names of the symbols are auto generated by appending the symbol's UserID to the end of the "___lldb_unnamed_symbol" string and is only done when the name is requested from a synthetic symbol if it has no name.
Differential Revision: https://reviews.llvm.org/D105160
|
|
Reverts commits:
"Fix failing tests after https://reviews.llvm.org/D104488."
"Fix buildbot failure after https://reviews.llvm.org/D104488."
"Create synthetic symbol names on demand to improve memory consumption and startup times."
This series of commits broke the windows lldb bot and then failed to fix all of the failing tests.
|
|
startup times.
This fix was created after profiling the target creation of a large C/C++/ObjC application that contained almost 4,000,000 redacted symbol names. The symbol table parsing code was creating names for each of these synthetic symbols and adding them to the name indexes. The code was also adding the object file basename to the end of the symbol name which doesn't allow symbols from different shared libraries to share the names in the constant string pool.
Prior to this fix this was creating 180MB of "___lldb_unnamed_symbol" symbol names and was taking a long time to generate each name, add them to the string pool and then add each of these names to the name index.
This patch fixes the issue by:
- not adding a name to synthetic symbols at creation time, and allows name to be dynamically generated when accessed
- doesn't add synthetic symbol names to the name indexes, but catches this special case as name lookup time. Users won't typically set breakpoints or lookup these synthetic names, but support was added to do the lookup in case it does happen
- removes the object file baseanme from the generated names to allow the names to be shared in the constant string pool
Prior to this fix the startup times for a large application was:
12.5 seconds (cold file caches)
8.5 seconds (warm file caches)
After this fix:
9.7 seconds (cold file caches)
5.7 seconds (warm file caches)
The names of the symbols are auto generated by appending the symbol's UserID to the end of the "___lldb_unnamed_symbol" string and is only done when the name is requested from a synthetic symbol if it has no name.
Differential Revision: https://reviews.llvm.org/D104488
|
|
This converts a default constructor's member initializers into C++11
default member initializers. This patch was automatically generated with
clang-tidy and the modernize-use-default-member-init check.
$ run-clang-tidy.py -header-filter='lldb' -checks='-*,modernize-use-default-member-init' -fix
This is a mass-refactoring patch and this commit will be added to
.git-blame-ignore-revs.
Differential revision: https://reviews.llvm.org/D103483
|
|
Commiting this patch for Augusto Noronha who is getting set
up still.
This patch changes Target::ReadMemory so the default behavior
when a read is in a Section that is read-only is to fetch the
data from the local binary image, instead of reading it from
memory. Update all callers to use their old preferences
(the old prefer_file_cache bool) using the new API; we should
revisit these calls and see if they really intend to read
live memory, or if reading from a read-only Section would be
equivalent and important for performance-sensitive cases.
rdar://30634422
Differential revision: https://reviews.llvm.org/D100338
|
|
Some functions in this file only use the "target" component of an
execution context. Adjust the argument lists to reflect that.
This avoids some defensive null checks and simplifies most of the
callers.
|
|
These parameters are unused in these methods, and some of them only had a
LanguageType parameter to pipe to other methods that don't use it
either.
|
|
Summary:
A *.cpp file header in LLDB (and in LLDB) should like this:
```
//===-- TestUtilities.cpp -------------------------------------------------===//
```
However in LLDB most of our source files have arbitrary changes to this format and
these changes are spreading through LLDB as folks usually just use the existing
source files as templates for their new files (most notably the unnecessary
editor language indicator `-*- C++ -*-` is spreading and in every review
someone is pointing out that this is wrong, resulting in people pointing out that this
is done in the same way in other files).
This patch removes most of these inconsistencies including the editor language indicators,
all the different missing/additional '-' characters, files that center the file name, missing
trailing `===//` (mostly caused by clang-format breaking the line).
Reviewers: aprantl, espindola, jfb, shafik, JDevlieghere
Reviewed By: JDevlieghere
Subscribers: dexonsmith, wuzish, emaste, sdardis, nemanjai, kbarton, MaskRay, atanasyan, arphaman, jfb, abidh, jsji, JDevlieghere, usaxena95, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D73258
|
|
Summary: This option was added downstream in swift-lldb. This upstreams this option as it seems useful and also adds the missing tests.
Reviewers: #lldb, kwk, labath
Reviewed By: kwk, labath
Subscribers: labath, kwk, abidh, JDevlieghere, lldb-commits
Tags: #lldb, #upstreaming_lldb_s_downstream_patches
Differential Revision: https://reviews.llvm.org/D69944
|
|
Testing whether a name is mangled or not is extremely cheap and can be
done by looking at the first two characters. Mangled knows how to do
it. On the flip side, many call sites that currently pass in an
is_mangled determination do not know how to correctly do it (for
example, they leave out Swift mangling prefixes).
This patch removes this entry point and just forced Mangled to
determine the mangledness of a string itself.
Differential Revision: https://reviews.llvm.org/D68674
llvm-svn: 374180
|
|
MachO only for this patch.
Differential Revision: https://reviews.llvm.org/D63914
<rdar://problem/51463642>
llvm-svn: 364686
|
|
My apologies for the large patch. With the exception of ConstString.h
itself it was entirely produced by sed.
ConstString has exactly one const char * data member, so passing a
ConstString by reference is not any more efficient than copying it by
value. In both cases a single pointer is passed. But passing it by
value makes it harder to accidentally return the address of a local
object.
(This fixes rdar://problem/48640859 for the Apple folks)
Differential Revision: https://reviews.llvm.org/D59030
llvm-svn: 355553
|
|
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
|
|
This patch removes the logic for resolving paths out of FileSpec and
updates call sites to rely on the FileSystem class instead.
Differential revision: https://reviews.llvm.org/D53915
llvm-svn: 345890
|
|
This is intended as a clean up after the big clang-format commit
(r280751), which unfortunately resulted in many of the comment
paragraphs in LLDB being very hard to read.
FYI, the script I used was:
import textwrap
import commands
import os
import sys
import re
tmp = "%s.tmp"%sys.argv[1]
out = open(tmp, "w+")
with open(sys.argv[1], "r") as f:
header = ""
text = ""
comment = re.compile(r'^( *//) ([^ ].*)$')
special = re.compile(r'^((([A-Z]+[: ])|([0-9]+ )).*)|(.*;)$')
for line in f:
match = comment.match(line)
if match and not special.match(match.group(2)):
# skip intentionally short comments.
if not text and len(match.group(2)) < 40:
out.write(line)
continue
if text:
text += " " + match.group(2)
else:
header = match.group(1)
text = match.group(2)
continue
if text:
filled = textwrap.wrap(text, width=(78-len(header)),
break_long_words=False)
for l in filled:
out.write(header+" "+l+'\n')
text = ""
out.write(line)
os.rename(tmp, sys.argv[1])
Differential Revision: https://reviews.llvm.org/D46144
llvm-svn: 331197
|
|
This moves the following classes from Core -> Utility.
ConstString
Error
RegularExpression
Stream
StreamString
The goal here is to get lldbUtility into a state where it has
no dependendencies except on itself and LLVM, so it can be the
starting point at which to start untangling LLDB's dependencies.
These are all low level and very widely used classes, and
previously lldbUtility had dependencies up to lldbCore in order
to use these classes. So moving then down to lldbUtility makes
sense from both the short term and long term perspective in
solving this problem.
Differential Revision: https://reviews.llvm.org/D29427
llvm-svn: 293941
|
|
Summary:
GetDisplayDemangledName will already return a ConstString() when
there is neither a mangled name or a demangled name, so we don't need to special
case here. This will fix GetDisplayName in cases where m_mangled contains
only a demangled name and not a mangled name.
Reviewers: clayborg, granata.enrico, sas
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D25201
llvm-svn: 283491
|
|
*** to conform to clang-format’s LLVM style. This kind of mass change has
*** two obvious implications:
Firstly, merging this particular commit into a downstream fork may be a huge
effort. Alternatively, it may be worth merging all changes up to this commit,
performing the same reformatting operation locally, and then discarding the
merge for this particular commit. The commands used to accomplish this
reformatting were as follows (with current working directory as the root of
the repository):
find . \( -iname "*.c" -or -iname "*.cpp" -or -iname "*.h" -or -iname "*.mm" \) -exec clang-format -i {} +
find . -iname "*.py" -exec autopep8 --in-place --aggressive --aggressive {} + ;
The version of clang-format used was 3.9.0, and autopep8 was 1.2.4.
Secondly, “blame” style tools will generally point to this commit instead of
a meaningful prior commit. There are alternatives available that will attempt
to look through this change and find the appropriate prior commit. YMMV.
llvm-svn: 280751
|
|
The ELF symbol table always contain the size of the symbols so we
don't have to try to guess them based on the address of the next
symbol (it is needed for mach-o).
The change fixes an issue when a symbol is removed after a 0 size
symbol (e.g. because the second one is not public) what previously
caused the symbol lookup algorithm to end up with showing the 0 size
symbol even for the later addresses (what are not part of any symbol).
That symbol lookup error can confuse the user and also confuses the
current stack unwinder.
Re-commit this CL after fixing the issue with gcc-4.9.2 on i386 Linux.
Differential revision: http://reviews.llvm.org/D16186
llvm-svn: 258113
|
|
It causes issues for i386 when compiling with gcc-4.9.2
This reverts commit e248214a3eab8e244095f97d1996c991cb988cc4.
llvm-svn: 258043
|
|
The ELF symbol table always contain the size of the symbols so we
don't have to try to guess them based on the address of the next
symbol (it is needed for mach-o).
The change fixes an issue when a symbol is removed after a 0 size
symbol (e.g. because the second one is not public) what previously
caused the symbol lookup algorithm to end up with showing the 0 size
symbol even for the later addresses (what are not part of any symbol).
That symbol lookup error can confuse the user and also confuses the
current stack unwinder.
Differential revision: http://reviews.llvm.org/D16186
llvm-svn: 258040
|
|
a language to use in order to soon support Pascal and Java demangling. Dawn Perchik will take care of making this so.
llvm-svn: 241751
|
