| Age | Commit message (Collapse) | Author |
|---|
|
(not `bool`) (#69991)
[lldb] Part 2 of 2 - Refactor `CommandObject::DoExecute(...)` to return
`void` instead of ~~`bool`~~
Justifications:
- The code doesn't ultimately apply the `true`/`false` return values.
- The methods already pass around a `CommandReturnObject`, typically
with a `result` parameter.
- Each command return object already contains:
- A more precise status
- The error code(s) that apply to that status
Part 1 refactors the `CommandObject::Execute(...)` method.
- See
[https://github.com/llvm/llvm-project/pull/69989](https://github.com/llvm/llvm-project/pull/69989)
rdar://117378957
|
|
Follow up to "Suppress persistent result when running po" (D144044).
This change delays removal of the persistent result until after `Dump` has been called.
In doing so, the persistent result is available for the purpose of getting its object
description.
In the original change, the persistent result removal happens indirectly, by setting
`EvaluateExpressionOptions::SetSuppressPersistentResult`. In practice this has worked,
however this exposed a latent bug in swift-lldb. The subtlety, and the bug, depend on
when the persisteted result variable is removed.
When the result is removed via `SetSuppressPersistentResult`, it happens within the call
to `Target::EvaluateExpression`. That is, by the time the call returns, the persistent
result is already removed.
The issue occurs shortly thereafter, when `ValueObject::Dump` is called, it cannot make
use of the persistent result variable (instead it uses the `ValueObjectConstResult`). In
swift-lldb, this causes an additional expression evaluation to happen. It first tries an
expression that reference `$R0` etc, but that always fails because `$R0` is removed. The
fallback to this failure does work most of the time, but there's at least one bug
involving imported Clang types.
Differential Revision: https://reviews.llvm.org/D150619
|
|
Change `dwim-print` to now disable persistent results by default, unless requested by
the user with the `--persistent-result` flag.
Ex:
```
(lldb) dwim-print 1 + 1
(int) 2
(lldb) dwim-print --persistent-result on -- 1 + 1
(int) $0 = 2
```
Users who wish to enable persistent results can make and use an alias that includes
`--persistent-result on`.
Updates: To recommit this, both TestPersistentResult.py and TestPAlias.py needed to be
updated, as well as the changes in D146230.
Differential Revision: https://reviews.llvm.org/D145609
|
|
This reverts commit 8bad4ae679df6fc7dbd016dccbd3da34206e836b.
|
|
Change `dwim-print` to now disable persistent results by default, unless requested by
the user with the `--persistent-result` flag.
Ex:
```
(lldb) dwim-print 1 + 1
(int) 2
(lldb) dwim-print --persistent-result on -- 1 + 1
(int) $0 = 2
```
Users who wish to enable persistent results can make and use an alias that includes
`--persistent-result on`.
Differential Revision: https://reviews.llvm.org/D145609
|
|
Context: The `expression` command uses artificial variables to store the expression
result. This result variable is unconditionally kept around after the expression command
has completed. These variables are known as persistent results. These are the variables
`$0`, `$1`, etc, that are displayed when running `p` or `expression`.
This change allows users to control whether result variables are persisted, by
introducing a `--persistent-result` flag.
This change keeps the current default behavior, persistent results are created by
default. This change gives users the ability to opt-out by re-aliasing `p`. For example:
```
command unalias p
command alias p expression --persistent-result false --
```
For consistency, this flag is also adopted by `dwim-print`. Of note, if asked,
`dwim-print` will create a persistent result even for frame variables.
Differential Revision: https://reviews.llvm.org/D144230
|
|
Adopt `expression`'s options in `dwim-print`.
This is primarily added to support the `--language`/`-l` flag.
Differential Revision: https://reviews.llvm.org/D144114
|
|
expressions
Summary:
LLDB keeps statistics of how many expression evaluations are 'successful' and 'failed'
which are updated after each expression evaluation (assuming statistics are enabled).
From what I understand the idea is that this could be used to define how well LLDB's
expression evaluator is working.
Currently all expressions are considered successful unless the user passes an explicit
positive element counting to the expression command (with the `-Z` flag) and then passes
an expression that successfully evaluates to a type that doesn't support element counting.
Expressions that fail to parse, execute or any other outcome are considered successful
at the moment which means we nearly always have a 100% expression evaluation
success rate.
This patch makes that expressions that fail to parse or execute to count as failed
expressions.
We can't know whether the expression failed because of an user error
of because LLDB couldn't correctly parse/compile it, but I would argue that this is
still an improvement. Assuming that the percentage of valid user expressions stays
mostly constant over time (which seems like a reasonable assumption), then this
way we can still see if we are doing relatively better/worse from release to release.
Reviewers: davide, aprantl, JDevlieghere
Reviewed By: aprantl
Subscribers: abidh
Differential Revision: https://reviews.llvm.org/D76280
|
|
The error_stream and result parameter were inconsistently checked for
being null, so we might as well make them references instead of crashing
in case someone passes a nullptr and hits one of the code paths that are
currently not doing a nullptr check on those parameters. Also change
output_stream for consistency.
|
|
|
|
LLDB has a few different styles of header guards and they're not very
consistent because things get moved around or copy/pasted. This patch
unifies the header guards across LLDB and converts everything to match
LLVM's style.
Differential revision: https://reviews.llvm.org/D74743
|
|
Summary: This removes most of unnecessary includes in the `source/Commands` directory. This was generated by IWYU and a script that fixed all the bogus reports from IWYU. Patch is tested on Linux and macOS.
Reviewers: JDevlieghere
Reviewed By: JDevlieghere
Subscribers: krytarowski, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D71489
|
|
remove any undocumented/redundant return values
Summary:
We still have some leftovers of the old completion API in the internals of
LLDB that haven't been replaced by the new CompletionRequest. These leftovers
are:
* The return values (int/size_t) in all completion functions.
* Our result array that starts indexing at 1.
* `WordComplete` mode.
I didn't replace them back then because it's tricky to figure out what exactly they
are used for and the completion code is relatively untested. I finally got around
to writing more tests for the API and understanding the semantics, so I think it's
a good time to get rid of them.
A few words why those things should be removed/replaced:
* The return values are really cryptic, partly redundant and rarely documented.
They are also completely ignored by Xcode, so whatever information they contain will end up
breaking Xcode's completion mechanism. They are also partly impossible to even implement
as we assign negative values special meaning and our completion API sometimes returns size_t.
Completion functions are supposed to return -2 to rewrite the current line. We seem to use this
in some untested code path to expand the history repeat character to the full command, but
I haven't figured out why that doesn't work at the moment.
Completion functions return -1 to 'insert the completion character', but that isn't implemented
(even though we seem to activate this feature in LLDB sometimes).
All positive values have to match the number of results. This is obviously just redundant information
as the user can just look at the result list to get that information (which is what Xcode does).
* The result array that starts indexing at 1 is obviously unexpected. The first element of the array is
reserved for the common prefix of all completions (e.g. "foobar" and "footar" -> "foo"). The idea is
that we calculate this to make the life of the API caller easier, but obviously forcing people to have
1-based indices is not helpful (or even worse, forces them to manually copy the results to make it
0-based like Xcode has to do).
* The `WordComplete` mode indicates that LLDB should enter a space behind the completion. The
idea is that we let the top-level API know that we just provided a full completion. Interestingly we
`WordComplete` is just a single bool that somehow represents all N completions. And we always
provide full completions in LLDB, so in theory it should always be true.
The only use it currently serves is providing redundant information about whether we have a single
definitive completion or not (which we already know from the number of results we get).
This patch essentially removes `WordComplete` mode and makes the result array indexed from 0.
It also removes all return values from all internal completion functions. The only non-redundant information
they contain is about rewriting the current line (which is broken), so that functionality was moved
to the CompletionRequest API. So you can now do `addCompletion("blub", "description", CompletionMode::RewriteLine)`
to do the same.
For the SB API we emulate the old behaviour by making the array indexed from 1 again with the common
prefix at index 0. I didn't keep the special negative return codes as we either never sent them before (e.g. -2) or we
didn't even implement them in the Editline handler (e.g. -1).
I tried to keep this patch minimal and I'm aware we can probably now even further simplify a bunch of related code,
but I would prefer doing this in follow-up NFC commits
Reviewers: JDevlieghere
Reviewed By: JDevlieghere
Subscribers: arphaman, abidh, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D66536
llvm-svn: 369624
|
|
Summary:
NFC = [[ https://llvm.org/docs/Lexicon.html#nfc | Non functional change ]]
This commit is the result of modernizing the LLDB codebase by using
`nullptr` instread of `0` or `NULL`. See
https://clang.llvm.org/extra/clang-tidy/checks/modernize-use-nullptr.html
for more information.
This is the command I ran and I to fix and format the code base:
```
run-clang-tidy.py \
-header-filter='.*' \
-checks='-*,modernize-use-nullptr' \
-fix ~/dev/llvm-project/lldb/.* \
-format \
-style LLVM \
-p ~/llvm-builds/debug-ninja-gcc
```
NOTE: There were also changes to `llvm/utils/unittest` but I did not
include them because I felt that maybe this library shall be updated in
isolation somehow.
NOTE: I know this is a rather large commit but it is a nobrainer in most
parts.
Reviewers: martong, espindola, shafik, #lldb, JDevlieghere
Reviewed By: JDevlieghere
Subscribers: arsenm, jvesely, nhaehnle, hiraditya, JDevlieghere, teemperor, rnkovacs, emaste, kubamracek, nemanjai, ki.stfu, javed.absar, arichardson, kbarton, jrtc27, MaskRay, atanasyan, dexonsmith, arphaman, jfb, jsji, jdoerfert, lldb-commits, llvm-commits
Tags: #lldb, #llvm
Differential Revision: https://reviews.llvm.org/D61847
llvm-svn: 361484
|
|
A lot of comments in LLDB are surrounded by an ASCII line to delimit the
begging and end of the comment.
Its use is not really consistent across the code base, sometimes the
lines are longer, sometimes they are shorter and sometimes they are
omitted. Furthermore, it looks kind of weird with the 80 column limit,
where the comment actually extends past the line, but not by much.
Furthermore, when /// is used for Doxygen comments, it looks
particularly odd. And when // is used, it incorrectly gives the
impression that it's actually a Doxygen comment.
I assume these lines were added to improve distinguishing between
comments and code. However, given that todays editors and IDEs do a
great job at highlighting comments, I think it's worth to drop this for
the sake of consistency. The alternative is fixing all the
inconsistencies, which would create a lot more churn.
Differential revision: https://reviews.llvm.org/D60508
llvm-svn: 358135
|
|
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
|
|
This patch removes the comments grouping header includes. They were
added after running IWYU over the LLDB codebase. However they add little
value, are often outdates and burdensome to maintain.
llvm-svn: 346626
|
|
Differential Revision: https://reviews.llvm.org/D52604
llvm-svn: 343348
|
|
Summary:
This patch adds initial code completion support for the `expr` command.
We now have a completion handler in the expression CommandObject that
essentially just attempts to parse the given user expression with Clang with
an attached code completion consumer. We filter and prepare the
code completions provided by Clang and send them back to the completion
API.
The current completion is limited to variables that are in the current scope.
This includes local variables and all types used by local variables. We however
don't do any completion of symbols that are not used in the local scope (or
in some other way already in the ASTContext).
This is partly because there is not yet any code that manually searches for additiona
information in the debug information. Another cause is that for some reason the existing
code for loading these additional symbols when requested by Clang doesn't seem to work.
This will be fixed in a future patch.
Reviewers: jingham, teemperor
Reviewed By: teemperor
Subscribers: labath, aprantl, JDevlieghere, friss, lldb-commits
Differential Revision: https://reviews.llvm.org/D48465
llvm-svn: 341086
|
|
Summary:
This patch gets rid of the C-string parameter in the RawCommandObject::DoExecute function,
making the code simpler and less memory unsafe.
There seems to be a assumption in some command objects that this parameter could be a nullptr,
but from what I can see the rest of the API doesn't actually allow this (and other command
objects and related code pieces dereference this parameter without any checks).
Especially CommandObjectRegexCommand has error handling code for a nullptr that is now gone.
Reviewers: davide, jingham, teemperor
Reviewed By: teemperor
Subscribers: jingham, lldb-commits
Differential Revision: https://reviews.llvm.org/D49207
llvm-svn: 336955
|
|
This renames the LLDB error class to Status, as discussed
on the lldb-dev mailing list.
A change of this magnitude cannot easily be done without
find and replace, but that has potential to catch unwanted
occurrences of common strings such as "Error". Every effort
was made to find all the obvious things such as the word "Error"
appearing in a string, etc, but it's possible there are still
some lingering occurences left around. Hopefully nothing too
serious.
llvm-svn: 302872
|
|
llvm-svn: 286723
|
|
Then deal with all the fallout.
Differential Revision: https://reviews.llvm.org/D24847
llvm-svn: 282265
|
|
This change is very mechanical. All it does is change the
signature of `Options::GetDefinitions()` and `OptionGroup::
GetDefinitions()` to return an `ArrayRef<OptionDefinition>`
instead of a `const OptionDefinition *`. In the case of the
former, it deletes the sentinel entry from every table, and
in the case of the latter, it removes the `GetNumDefinitions()`
method from the interface. These are no longer necessary as
`ArrayRef` carries its own length.
In the former case, iteration was done by using a sentinel
entry, so there was no knowledge of length. Because of this
the individual option tables were allowed to be defined below
the corresponding class (after all, only a pointer was needed).
Now, however, the length must be known at compile time to
construct the `ArrayRef`, and as a result it is necessary to
move every option table before its corresponding class. This
results in this CL looking very big, but in terms of substance
there is not much here.
Differential revision: https://reviews.llvm.org/D24834
llvm-svn: 282188
|
|
*** to conform to clang-format’s LLVM style. This kind of mass change has
*** two obvious implications:
Firstly, merging this particular commit into a downstream fork may be a huge
effort. Alternatively, it may be worth merging all changes up to this commit,
performing the same reformatting operation locally, and then discarding the
merge for this particular commit. The commands used to accomplish this
reformatting were as follows (with current working directory as the root of
the repository):
find . \( -iname "*.c" -or -iname "*.cpp" -or -iname "*.h" -or -iname "*.mm" \) -exec clang-format -i {} +
find . -iname "*.py" -exec autopep8 --in-place --aggressive --aggressive {} + ;
The version of clang-format used was 3.9.0, and autopep8 was 1.2.4.
Secondly, “blame” style tools will generally point to this commit instead of
a meaningful prior commit. There are alternatives available that will attempt
to look through this change and find the appropriate prior commit. YMMV.
llvm-svn: 280751
|
|
Options used to store a reference to the CommandInterpreter instance
in the base Options class. This made it impossible to parse options
independent of a CommandInterpreter.
This change removes the reference from the base class. Instead, it
modifies the options-parsing-related methods to take an
ExecutionContext pointer, which the options may inspect if they need
to do so.
Closes https://reviews.llvm.org/D23416
Reviewers: clayborg, jingham
llvm-svn: 278440
|
|
This allows expressions such as 'i == 1 || i == 2` to be executed using the IR interpreter, instead of relying on JIT code injection (which may not be available on some platforms).
Patch by cameron314
Differential Revision: http://reviews.llvm.org/D19124
llvm-svn: 269340
|
|
IOHandlerLinesUpdated() does nothing, and IOHandlerIsInputComplete should be
implemented but isn't. This means that multiline expressions don't work. This
patch fixes that. Test case to follow in the next commit.
llvm-svn: 268970
|
|
setting to
quietly apply fixits for those who really trust clang's fixits.
Also, moved the retry into ClangUserExpression::Evaluate, where I can make a whole new ClangUserExpression
to do the work. Reusing any of the parts of a UserExpression in situ isn't supported at present.
<rdar://problem/25351938>
llvm-svn: 264793
|
|
Top-level Clang expressions are expressions that act as new translation units,
and define their own symbols. They do not have function wrappers like regular
expressions do, and declarations are persistent regardless of use of the dollar
sign in identifiers. Names defined by these are given priority over all other
symbol lookups.
This patch adds a new expression option, '-p' or '--top-level,' which controls
whether the expression is treated this way. It also adds a flag controlling
this to SBExpressionOptions so that this API is usable externally. It also adds
a test that validates that this works. (The test requires a fix to the Clang
AST importer which I will be committing shortly.)
<rdar://problem/22864976>
llvm-svn: 264662
|
|
"." for "->".)
This feature is controlled by an expression command option, a target property and the
SBExpressionOptions setting. FixIt's are only applied to UserExpressions, not UtilityFunctions,
those you have to get right when you make them.
This is just a first stage. At present the fixits are applied silently. The next step
is to tell the user about the applied fixit.
<rdar://problem/25351938>
llvm-svn: 264379
|
|
"expr -r" does this. It also returns to a REPL if the LLDB command interpreter
is neseted inside it, for example in cases where a REPL command resulted in a
breakpoint being hit or a crash.
llvm-svn: 250780
|
|
closing inclusion guards
patch by Eugene Zelenko.
Differential Revision: http://reviews.llvm.org/D12207
llvm-svn: 246628
|
|
This patch adds the option -l/--language to the expression command, for
use when setting the language options or choosing an alternate FE. If
not specified, the target.language setting is used.
Reviewed by: clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11447
llvm-svn: 243187
|
|
when there is no expression following the option terminating “—“.
llvm-svn: 203872
|
|
printed twice.
<rdar://problem/16031890>
llvm-svn: 201171
|
|
The many many benefits include:
1 - Input/Output/Error streams are now handled as real streams not a push style input
2 - auto completion in python embedded interpreter
3 - multi-line input for "script" and "expression" commands now allow you to edit previous/next lines using up and down arrow keys and this makes multi-line input actually a viable thing to use
4 - it is now possible to use curses to drive LLDB (please try the "gui" command)
We will need to deal with and fix any buildbot failures and tests and arise now that input/output and error are correctly hooked up in all cases.
llvm-svn: 200263
|
|
Cleaned up ClangUserExpression::Evaluate() to have only one variant that takes a "const EvaluateExpressionOptions& options" instead of taking many arguments.
The "--debug" option is designed to allow you to debug your expression by stopping at the first instruction (it enables --ignore-breakpoints=true and --unwind-on-error=false) and allowing you to step through your JIT code. It needs to be more integrated with the thread plan, so I am checking this in so Jim Ingham can make it happen.
llvm-svn: 194009
|
|
DumpValueObject() 2.0
This checkin restores pre-Xcode5 functionality to the "po" (expr -O) command:
- expr now has a new --description-verbosity (-v) argument, which takes either compact or full as a value (-v is the same as -vfull)
When the full mode is on, "po" will show the extended output with type name, persistent variable name and value, as in
(lldb) expr -O -v -- foo
(id) $0 = 0x000000010010baf0 {
1 = 2;
2 = 3;
}
When -v is omitted, or -vcompact is passed, the Xcode5-style output will be shown, as in
(lldb) expr -O -- foo
{
1 = 2;
2 = 3;
}
- for a non-ObjectiveC object, LLDB will still try to retrieve a summary and/or value to display
(lldb) po 5
5
-v also works in this mode
(lldb) expr -O -vfull -- 5
(int) $4 = 5
On top of that, this is a major refactoring of the ValueObject printing code. The functionality is now factored into a ValueObjectPrinter class for easier maintenance in the future
DumpValueObject() was turned into an instance method ValueObject::Dump() which simply calls through to the printer code, Dump_Impl has been removed
Test case to follow
llvm-svn: 191694
|
|
errors (i.e. crashes) which continue to be
controlled by the --unwind-on-error flag, and --ignore-breakpoint which separately controls behavior when a called
function hits a breakpoint. For breakpoints, we don't unwind, we either stop, or ignore the breakpoint, which makes
more sense.
Also make both these behaviors globally settable through "settings set".
Also handle the case where a breakpoint command calls code that ends up re-hitting the breakpoint. We were recursing
and crashing. Now we just stop without calling the second command.
<rdar://problem/12986644>
<rdar://problem/9119325>
llvm-svn: 172503
|
|
Adding useful formatting options to the expression (expr) command.
As a side effect of this change, the -d option now supports the same three-values enumeration that frame variables uses (run, don't run, none) instead of a boolean like it did previously
These options do not apply to print, p or po because these are aliased to not take any options.
In order to use them, use expression or expr.
llvm-svn: 171993
|
|
"expr" command and from
the SB API's that evaluate expressions.
<rdar://problem/12457211>
llvm-svn: 166062
|
|
the raw version implement an
Execute which was never going to get run and another ExecuteRawCommandString. Took the knowledge of how
to prepare raw & parsed commands out of CommandInterpreter and put it in CommandObject where it belongs.
Also took all the cases where there were the subcommands of Multiword commands declared in the .h file for
the overall command and moved them into the .cpp file.
Made the CommandObject flags work for raw as well as parsed commands.
Made "expr" use the flags so that it requires you to be paused to run "expr".
llvm-svn: 158235
|
|
ExecutionContext objects have shared pointers to Target, Process, Thread
and Frame objects and they can end up being held onto for too long.
llvm-svn: 149133
|
|
OptionGroupFormat. Updated OptionGroupFormat to be able to also use the
"--size" and "--count" options. Commands that use a OptionGroupFormat instance
can choose which of the options they want by initializing OptionGroupFormat
accordingly. Clients can either get only the "--format", "--format" + "--size",
or "--format" + "--size" + "--count". This is in preparation for upcoming
chnages where there are alternate ways (GDB format specification) to set a
format.
llvm-svn: 142911
|
|
use the asynchronous stream mechanism rather than writing
directly to the Debugger's output & error streams.
llvm-svn: 132930
|
|
for "frame var" and for the
expressions that are simple enough to get passed to the "frame var" underpinnings. The parser code will
have to be changed to also query for the dynamic types & offsets as it is looking up variables.
The behavior of "frame var" is controlled in two ways. You can pass "-d {true/false} to the frame var
command to get the dynamic or static value of the variables you are printing.
There's also a general setting:
target.prefer-dynamic-value (boolean) = 'true'
which is consulted if you call "frame var" without supplying a value for the -d option.
llvm-svn: 129623
|
|
lldb_private::OptionGroup
lldb_private::OptionGroupOptions
OptionGroup lets you define a class that encapsulates settings that you want
to reuse in multiple commands. It contains only the option definitions and the
ability to set the option values, but it doesn't directly interface with the
lldb_private::Options class that is the front end to all of the CommandObject
option parsing. For that the OptionGroupOptions class can be used. It aggregates
one or more OptionGroup objects and directs the option setting to the
appropriate OptionGroup class. For an example of this, take a look at the
CommandObjectFile and how it uses its "m_option_group" object shown below
to be able to set values in both the FileOptionGroup and PlatformOptionGroup
classes. The members used in CommandObjectFile are:
OptionGroupOptions m_option_group;
FileOptionGroup m_file_options;
PlatformOptionGroup m_platform_options;
Then in the constructor for CommandObjectFile you can combine the option
settings. The code below shows a simplified version of the constructor:
CommandObjectFile::CommandObjectFile(CommandInterpreter &interpreter) :
CommandObject (...),
m_option_group (interpreter),
m_file_options (),
m_platform_options(true)
{
m_option_group.Append (&m_file_options);
m_option_group.Append (&m_platform_options);
m_option_group.Finalize();
}
We append the m_file_options and then the m_platform_options and then tell
the option group the finalize the results. This allows the m_option_group to
become the organizer of our prefs and after option parsing we end up with
valid preference settings in both the m_file_options and m_platform_options
objects. This also allows any other commands to use the FileOptionGroup and
PlatformOptionGroup classes to implement options for their commands.
Renamed:
virtual void Options::ResetOptionValues();
to:
virtual void Options::OptionParsingStarting();
And implemented a new callback named:
virtual Error Options::OptionParsingFinished();
This allows Options subclasses to verify that the options all go together
after all of the options have been specified and gives the chance for the
command object to return an error. It also gives a chance to take all of the
option values and produce or initialize objects after all options have
completed parsing.
Modfied:
virtual Error
SetOptionValue (int option_idx, const char *option_arg) = 0;
to be:
virtual Error
SetOptionValue (uint32_t option_idx, const char *option_arg) = 0;
(option_idx is now unsigned).
llvm-svn: 129415
|
|
This allows you to have a platform selected, then specify a triple using
"i386" and have the remaining triple items (vendor, os, and environment) set
automatically.
Many interpreter commands take the "--arch" option to specify an architecture
triple, so now the command options needed to be able to get to the current
platform, so the Options class now take a reference to the interpreter on
construction.
Modified the build LLVM building in the Xcode project to use the new
Xcode project level user definitions:
LLVM_BUILD_DIR - a path to the llvm build directory
LLVM_SOURCE_DIR - a path to the llvm sources for the llvm that will be used to build lldb
LLVM_CONFIGURATION - the configuration that lldb is built for (Release,
Release+Asserts, Debug, Debug+Asserts).
I also changed the LLVM build to not check if "lldb/llvm" is a symlink and
then assume it is a real llvm build directory versus the unzipped llvm.zip
package, so now you can actually have a "lldb/llvm" directory in your lldb
sources.
llvm-svn: 129112
|
|
public types and public enums. This was done to keep the SWIG stuff from
parsing all sorts of enums and types that weren't needed, and allows us to
abstract our API better.
llvm-svn: 128239
|
