`weightCalcHelper` is responsible for adding hints to MRI. Prior to this
PR, we fell back on register ID as the last tie breaker for sorting
hints. However, there is an opportunity to add an additional sorting
characteristic: whether or not a register is a callee-saved-register.

I thought of this idea because I saw that `AllocationOrder::create`
calls `RegisterClassInfo::getOrder`, which returns a list of registers
such that the registers which alias callee-saved-registers come last.
From this, I conclude that the register allocator prefers an order such
that callee-saved-registers are allocated after
non-callee-saved-registers to avoid having to spill the CSR.

This sorting characteristic occurs only as a tie breaker to the Weight
calculation. This is a good idea since the weight calculation is pretty
complex and I'm sure it is a pretty stable metric. I think its pretty
reasonable to agree that whether a register is callee-saved or not is a
better tie breaker than register ID. I think this is evident by the test
diff, since the changes all seem to have no impact or improve the
register allocation.

Similar to 806761a7629df268c8aed49657aeccffa6bca449

-mtriple= specifies the full target triple while -march= merely sets the
architecture part of the default target triple (e.g. Windows, macOS),
leaving a target triple which may not make sense.

Therefore, -march= is error-prone and not recommended for tests without a target
triple. The issue has been benign as we recognize sparc*-apple-darwin as ELF instead
of rejecting it outrightly.

On SPARC, leaf function optimization omits the register window sliding (and the associated register name changes). This might result in miscompilation of procedures containing inline assembly, as some of the register constraints used may interfere with the register usage of optimized functions, so we disable leaf procedure optimization on those procedures to prevent it from happening.

This is a continuation of patch D102342 by @LemonBoy, the original comment is reproduced below:

> Leaf functions allow the compiler to omit the setup and teardown of a frame pointer, therefore avoiding the exchange of the in/out register. According to the SPARC architecture manual every reference to %i0-%i5 should be replaced with %o0-o5, if the target register is already in use a further remapping step to %g1-%g7 is required to free the output register.
>
> Add a simple check to make sure not to stomp on any output register that's already in use.

Reviewed By: dcederman

Differential Revision: https://reviews.llvm.org/D128263

Essentially the same as the GEP change in r230786.

A similar migration script can be used to update test cases, though a few more
test case improvements/changes were required this time around: (r229269-r229278)

import fileinput
import sys
import re

pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)")

for line in sys.stdin:
  sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line))

Reviewers: rafael, dexonsmith, grosser

Differential Revision: http://reviews.llvm.org/D7649

llvm-svn: 230794

One of several parallel first steps to remove the target type of pointers,
replacing them with a single opaque pointer type.

This adds an explicit type parameter to the gep instruction so that when the
first parameter becomes an opaque pointer type, the type to gep through is
still available to the instructions.

* This doesn't modify gep operators, only instructions (operators will be
  handled separately)

* Textual IR changes only. Bitcode (including upgrade) and changing the
  in-memory representation will be in separate changes.

* geps of vectors are transformed as:
    getelementptr <4 x float*> %x, ...
  ->getelementptr float, <4 x float*> %x, ...
  Then, once the opaque pointer type is introduced, this will ultimately look
  like:
    getelementptr float, <4 x ptr> %x
  with the unambiguous interpretation that it is a vector of pointers to float.

* address spaces remain on the pointer, not the type:
    getelementptr float addrspace(1)* %x
  ->getelementptr float, float addrspace(1)* %x
  Then, eventually:
    getelementptr float, ptr addrspace(1) %x

Importantly, the massive amount of test case churn has been automated by
same crappy python code. I had to manually update a few test cases that
wouldn't fit the script's model (r228970,r229196,r229197,r229198). The
python script just massages stdin and writes the result to stdout, I
then wrapped that in a shell script to handle replacing files, then
using the usual find+xargs to migrate all the files.

update.py:
import fileinput
import sys
import re

ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
normrep = re.compile(       r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")

def conv(match, line):
  if not match:
    return line
  line = match.groups()[0]
  if len(match.groups()[5]) == 0:
    line += match.groups()[2]
  line += match.groups()[3]
  line += ", "
  line += match.groups()[1]
  line += "\n"
  return line

for line in sys.stdin:
  if line.find("getelementptr ") == line.find("getelementptr inbounds"):
    if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("):
      line = conv(re.match(ibrep, line), line)
  elif line.find("getelementptr ") != line.find("getelementptr ("):
    line = conv(re.match(normrep, line), line)
  sys.stdout.write(line)

apply.sh:
for name in "$@"
do
  python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name"
  rm -f "$name.tmp"
done

The actual commands:
From llvm/src:
find test/ -name *.ll | xargs ./apply.sh
From llvm/src/tools/clang:
find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}"
From llvm/src/tools/polly:
find test/ -name *.ll | xargs ./apply.sh

After that, check-all (with llvm, clang, clang-tools-extra, lld,
compiler-rt, and polly all checked out).

The extra 'rm' in the apply.sh script is due to a few files in clang's test
suite using interesting unicode stuff that my python script was throwing
exceptions on. None of those files needed to be migrated, so it seemed
sufficient to ignore those cases.

Reviewers: rafael, dexonsmith, grosser

Differential Revision: http://reviews.llvm.org/D7636

llvm-svn: 230786

TableGen has a fairly dubious heuristic to decide whether an alias should be
printed: does the alias have lest operands than the real instruction. This is
bad enough (particularly with no way to override it), but it should at least be
calculated consistently for both strings.

This patch implements that logic: first get the *correct* string for the
variant, in the same way as the Matcher, without guessing; then count the
number of whitespace chars.

There are basically 4 changes this brings about after the previous
commits; all of these appear to be good, so I have changed the tests:

+ ARM64: we print "neg X, Y" instead of "sub X, xzr, Y".
+ ARM64: we skip implicit "uxtx" and "uxtw" modifiers.
+ Sparc: we print "mov A, B" instead of "or %g0, A, B".
+ Sparc: we print "fcmpX A, B" instead of "fcmpX %fcc0, A, B"

llvm-svn: 208969

llvm-svn: 198910

This update was done with the following bash script:

  find test/CodeGen -name "*.ll" | \
  while read NAME; do
    echo "$NAME"
    if ! grep -q "^; *RUN: *llc.*debug" $NAME; then
      TEMP=`mktemp -t temp`
      cp $NAME $TEMP
      sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \
      while read FUNC; do
        sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP
      done
      sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP
      sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP
      sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP
      sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP
      mv $TEMP $NAME
    fi
  done

llvm-svn: 186280

llvm-svn: 183067