Hi Joseph,

As we discussed, this patch just makes C23 include every check that is
performed by C11.

I tested the commit by adding the ISO23 Make and Python variables to be
the same as ISO11.  So the only difference was compiling with -DISO23
instead of -DISO11.  And changed the temporary directories to instead
use the format f'/tmp/glibc-{self.standard}-{self.header}'.  Then I used
a shell script to run 'cmp' on each file in the ISO11 and ISO23
directories for each header to make sure they were the same.

-- 8< --

Make C23 checks include every test that is performed by C11.  Done by
running the following command:

find conform -name '*.h-data' | xargs sed -i \
  -e 's| !defined ISO11| !defined ISO11 \&\& !defined ISO23|g' \
  -e 's| defined ISO11| defined ISO11 \|\| defined ISO23|g' \
  -e 's|ifdef ISO11|if defined ISO11 \|\| defined ISO23|g' \
  -e 's|ifndef ISO11|if !defined ISO11 \&\& !defined ISO23|g'

Signed-off-by: Collin Funk <collin.funk1@gmail.com>

clang does not define __SIG_ATOMIC_TYPE__, instead add another
directive ('size:') which instruct to use an integer type of
defined minimum size.

Reviewed-by: Sam James <sam@gentoo.org>

Linux 6.7 removed ia64 from the official tree [1], following the general
principle that a glibc port needs upstream support for the architecture
in all the components it depends on (binutils, GCC, and the Linux
kernel).

Apart from the removal of sysdeps/ia64 and sysdeps/unix/sysv/linux/ia64,
there are updates to various comments referencing ia64 for which removal
of those references seemed appropriate. The configuration is removed
from README and build-many-glibcs.py.

The CONTRIBUTED-BY, elf/elf.h, manual/contrib.texi (the porting
mention), *.po files, config.guess, and longlong.h are not changed.

For Linux it allows cleanup some clone2 support on multiple files.

The following bug can be closed as WONTFIX: BZ 22634 [2], BZ 14250 [3],
BZ 21634 [4], BZ 10163 [5], BZ 16401 [6], and BZ 11585 [7].

[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=43ff221426d33db909f7159fdf620c3b052e2d1c
[2] https://sourceware.org/bugzilla/show_bug.cgi?id=22634
[3] https://sourceware.org/bugzilla/show_bug.cgi?id=14250
[4] https://sourceware.org/bugzilla/show_bug.cgi?id=21634
[5] https://sourceware.org/bugzilla/show_bug.cgi?id=10163
[6] https://sourceware.org/bugzilla/show_bug.cgi?id=16401
[7] https://sourceware.org/bugzilla/show_bug.cgi?id=11585
Reviewed-by: Carlos O'Donell <carlos@redhat.com>

This was uncovered by a recent clang change [1].  Different than ISO C,
POSIX states that va_list should be exported by wchar.h [2].

Checked on x86_64-linux-gnu and aarch64-linux-gnu.

[1] https://reviews.llvm.org/D137268
[2] https://pubs.opengroup.org/onlinepubs/9699919799.2018edition/basedefs/wchar.h.html

BZ #23089 was fixed by d865ff74ba09 ("hurd: implement SA_SIGINFO signal
handlers")

The new __proc_waitid RPC now expects WEXITED to be passed, allowing to
properly implement waitid, and thus define the missing W* macros
(according to FreeBSD values).

This patch sets the mode field in ipc_perm as mode_t for all architectures,
as POSIX specification [1].  The changes required are as follow:

  1. It moves the ipc_perm definition out of ipc.h to its own header
     ipc_perm.h.  It also allows consolidate the IPC_* definition on
     only one header.

  2. The generic implementation follow the kernel ipc64_perm size so the
     syscall can be made directly without temporary buffer copy.  However,
     since glibc defines the MODE field as mode_t, it omits the __PAD1 field
     (since glibc does not export mode_t as 16-bit for any architecture).

     It is a two-fold improvement:

     2.1. New implementation which follow Linux UAPI will not need to
	  provide an arch-specific ipc-perm.h header neither wrongly
          use the wrong 16-bit definition from previous default ipc.h
	  (as csky did).

     2.1. It allows consolidate ipc_perm definition for architectures that
          already provide mode_t as 32-bit.

  3. All kernel ABIs for the supported architectures already provides the
     expected padding for mode type extension to 32-bit.  However, some
     architectures the padding has the wrong placement, so it requires
     the ipc control routines (msgctl, semctl, and shmctl) to adjust the
     mode field accordingly.  Currently they are armeb, microblaze, m68k,
     s390, and sheb.

     A new assume is added, __ASSUME_SYSVIPC_BROKEN_MODE_T, which the
     required ABIs define.

  4. For the ABIs that define __ASSUME_SYSVIPC_BROKEN_MODE_T, it also
     require compat symbols that do not adjust the mode field.

Checked on arm-linux-gnueabihf, aarch64-linux-gnu, powerpc64le-linux-gnu,
and x86_64-linux-gnu. I also checked the sysvipc tests on hppa-linux-gnu,
sh4-linux-gnu, s390x-linux-gnu, and s390-linux-gnu.

I also did a sanity test against armeb qemu usermode for the sysvipc
tests.

	[BZ #18231]
	* sysdeps/unix/sysv/linux/Makefile (sysdep_headers): Add
	bits/ipc-perm.h.
	* sysdeps/unix/sysv/linux/aarch64/bits/ipc.h: Remove file.
	* sysdeps/unix/sysv/linux/alpha/bits/ipc.h: Likewise.
	* sysdeps/unix/sysv/linux/hppa/bits/ipc.h: Likewise.
	* sysdeps/unix/sysv/linux/ia64/bits/ipc.h: Likewise.
	* sysdeps/unix/sysv/linux/mips/bits/ipc.h: Likewise.
	* sysdeps/unix/sysv/linux/powerpc/bits/ipc.h: Likewise.
	* sysdeps/unix/sysv/linux/s390/bits/ipc.h: Likewise.
	* sysdeps/unix/sysv/linux/sparc/bits/ipc.h: Likewise.
	* sysdeps/unix/sysv/linux/arm/kernel-features.h
	[__BYTE_ORDER == __BIG_ENDIAN] (__ASSUME_SYSVIPC_BROKEN_MODE_T):
	Define.
	* sysdeps/sysv/linux/microblaze/kernel-features.h: Likewise.
	* sysdeps/unix/sysv/linux/s390/kernel-features.h
	[!__s390x__] (__ASSUME_SYSVIPC_BROKEN_MODE_T): Define.
	* sysdeps/unix/sysv/linux/sh/kernel-features.h
	(__ASSUME_SYSVIPC_BROKEN_MODE_T): Define.
	* sysdeps/unix/sysv/linux/m68k/kernel-features.h: Likewise.
	* sysdeps/unix/sysv/linux/bits/ipc-perm.h: New file.
	* sysdeps/unix/sysv/linux/powerpc/bits/ipc-perm.h: Likewise.
	* sysdeps/unix/sysv/linux/sparc/bits/ipc-perm.h: Likewise.
	* sysdeps/unix/sysv/linux/bits/ipc.h (ipc_perm): Move to
	bits/ipc-perm.h.
	* sysdeps/unix/sysv/linux/hppa/bits/ipc-perm.h: New file.
	* sysdeps/unix/sysv/linux/kernel-features.h: Add comment about
	__ASSUME_SYSVIPC_BROKEN_MODE_T semantic.
	* sysdeps/unix/sysv/linux/msgctl.c (DEFAULT_VERSION): Define as
	2.31 if __ASSUME_SYSVIPC_BROKEN_MODE_T is defined.
	(msgctl_syscall, __msgctl_mode16): New symbol.
	(__new_msgctl): Add bits for __ASSUME_SYSVIPC_BROKEN_MODE_T.
	* sysdeps/unix/sysv/linux/semctl.c: Likewise.
	* sysdeps/unix/sysv/linux/shmctl.c: Likewise.
	* sysdeps/unix/sysv/linux/arm/be/libc.abilist (GLIBC_2.31): Add
	msgctl, semctl, and shmctl.
	* sysdeps/sysv/linux/microblaze/be/libc.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist: Likewise.
	* sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist: Likewise.
	* sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise.
	* sysdeps/unix/sysv/linux/sh/be/libc.abilist: Likewise.
	* conform/data/sys/ipc.h-data: Only xfail {struct ipc_perm} mode_t
	mode for Hurd.
	* sysdeps/unix/sysv/linux/m68k/Versions (libc) [GLIBC_2.31]: Add
	msgctl, semctl, and shmctl.
	* sysdeps/unix/sysv/linux/arm/be/Versions: New file.
	* sysdeps/unix/sysv/linux/microblaze/be/Versions: Likewise.
	* sysdeps/unix/sysv/linux/sh/be/Versions: Likewise.

[1] http://pubs.opengroup.org/onlinepubs/9699919799/basedefs/sys_ipc.h.html

The stub implementations are turned into compat symbols.

Linux actually has two reserved system call numbers (for getpmsg
and putpmsg), but these system calls have never been implemented,
and there are no plans to implement them, so this patch replaces
the wrappers with the generic stubs.

According to <https://bugzilla.redhat.com/show_bug.cgi?id=436349>,
the presence of the XSI STREAMS declarations is a minor portability
hazard because they are not actually implemented.

This commit does not change the TIRPC support code in
sunrpc/rpc_svcout.c.  It uses additional XTI functionality and
therefore never worked with glibc.

Reviewed-by: Carlos O'Donell <carlos@redhat.com>

Continuing the consolidation on Python for various miscellaneous build
and test scripts, this patch moves conformtest from Perl to Python.

The substance of the tests run is intended to be the same as before,
except that the previous test for tags did not actually achieve the
intended purpose of verifying whether a tag was already declared, so
is changed to one that would actually fail for a tag that wasn't
declared, and a typo in the old test for variables being available
($xyzzy instead of xyzzy) would have made that test not use the
correct type (but it would have passed anyway with warnings).  No
attempt is made to keep the details of what the test output looks
like; instead, tests are given names which are made to follow PASS: /
FAIL: / XFAIL: / SKIP: / MISSING: as appropriate.

In the new version, there is more consistent parsing of test lines
(into a series of words, either surrounded by {} or separated by
spaces) that applies for all kinds of test lines, rather than the old
approach of different regular expressions for every kind of test.  A
few of the conform/data/ files are adjusted so their syntax works with
the new script (which now requires spaces in certain cases where the
old script tolerated them being missing, and does not allow stray
semicolons at the end of "function" lines).  Similarly, common logic
is used around what happens with a second subtest if a first one fails
(e.g., a test for a symbol's type if the test for availability fails),
rather than such logic being replicated separately for each kind of
test.  Common parsing also applies for test lines both when they are
lines for the header under test and when they are lines for another
header specified with allow-header, again unlike the old script.

Tested for x86_64, and with build-many-glibcs.py.

	* conform/conformtest.py: New file.
	* conform/conformtest.pl: Remove.
	* conform/GlibcConform.pm: Likewise.
	* conform/glibcconform.py (KEYWORDS_C90): New constant.
	(KEYWORDS_C99): Likewise.
	(KEYWORDS): Likewise.
	* conform/Makefile ($(conformtest-header-tests)): Use
	conformtest.py instead of conformtest.pl.  Do not pass --tmpdir
	option.  Use --header instead of --headers.
	* conform/data/arpa/inet.h-data: Remove trailing semicolons on
	function entries.
	* conform/data/spawn.h-data: Likewise.
	* conform/data/fcntl.h-data (openat): Add space after function
	name.
	* conform/data/wchar.h-data (wcscasecmp): Likewise.
	(wcscasecmp_l): Likewise.
	* conform/data/termios.h-data (c_cc): Add space after element
	name.